Vacuum Cleaner Accessories

Charger fits the Pet Stain Eraser Cordless Handheld Portable Cleaner. NOTE: Your Pet Stain Eraser charger should only be used with charger SIL, Model SSA-100060US.. Before charging, make sure the unit more→is off by ensuring the battery status indicator lights are not illuminated. Insert the charging adapter plug into the charging port on the handle near the base of the unit. NOTE: There is a door covering the charging port that will automatically slide out of the way when the charging adapter is inserted. Plug the adapter into a suitable wall outlet. The battery status indicator lights will illuminate when charging. For maximum run time, charge the unit 4 hours prior to use. NOTE: On first use,

Filter for the Powerglide Cordless Vacuum - Model 1534. | Filter for Powerglide Cordless Vacuum | 1606359

Charger for ReadyClean A3 Robotic Mop, series 3571. | Charger for ReadyClean A3 | 1631644

Filter for the BISSELL Pet Hair Eraser Corded Slim Vacuum Cleaner, Series 2897 and CleanView Pet Slim Corded Vacuum. Series 2831, 3070. | Filter for Select Corded Slim Vacuums | 1623102

Charger for Select Hand Vacuums, including AutoMate Car Hand Vac, Series 2284W. ALWAYS TURN UNIT OFF PRIOR TO CHARGING. Failing to do so may result in battery not fully charging Insert charging adapte more→r plug into the charging port on the back of the unit. Plus the adapter into the wall outlet. The power LED lights will illuminate when charging Charge the unit completely for 8 hours prior to first use. NOTE: The LED light will blink RED when charging and turn GREEN once fully charged. After 10 minutes of being fully charged, the GREEN light will flash once per minute. The adapter may become warm during charging - this is normal. | Charger for Select Hand Vacuums | 1614206

Charger for select BISSELL Portable Carpet Cleaners. To charge your machine, follow these instructions: NOTE: For maximum run time (up to 30 minutes in Eco mode), charge for 4 hours before use. Make s more→ure machine is OFF. The charging port door slides out of the way when charger is inserted. Insert charger into port. Plug charger into a wall outlet. The battery status indicator lights will illuminate when charging. | Charger for Select Portable Carpet Cleaners | 1638675

Battery for select BISSELL Robotic Vacuums including EV675 Multi-Surface Robotic Vacuum Cleaner, series 2503 and CleanView Connect Robotic Vacuum, Series 2933 Follow these directions to change the bat more→tery: DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK! You will need a Phillips-head screwdriver to do this task. Turn the Power Switch to the OFF position. Use a Phillips-head screwdriver to remove the two screws and battery cover. Remove the battery and disconnect Connect the new battery and install into battery compartment Use a Phillips-head screwdriver to replace the battery cover. For specific battery disposal instructions, please contact RBRC (Rechargable Battery Recycling

Charger for Adapt Ion and PowerLifter Pet Ion Stick Vacuum Cleaners. Insert Charging Adapter Plug into the charging port on the back of the unit Plug the adapter into the outlet Charge unit completely more→prior to FIRST use | Charger for Select Stick Vacuums | 1616326

Charger for Select BISSELL Stick Vacuums Including CleanView Pet Slim, PowerGlide Pet Slim, PowerEdge Cordless Stick Vacs, Series 2903, 3080, and 2900. To Charge your Stick Vac, follow these instructi more→ons: To Charge with the Hand Vacuum: Before first use, make sure to fully charge your stick vacuum. Plug the battery charger into the wall. Plug the charger into the charging port on the back of the hand vacuum. Let the Hand Vacuum charge for 5 hours or until all three sections of the battery charge icon are illuminated and flashing. Charging with the Wall Storage & Charging Station: Follow the instructions for installing the Wall Storage & Charging Station. Once installed, hang the machine onto

This Holster holds the Aerosol Pretreat for help getting tough stains out of the carpet. Clips on the side of the vacuum for convenient use. | Holster for Select Upright Vacuum Cleaners | 2037930

Replacement charger for the EasySweep carpet and floor series sweepers. | Charger for the EasySweep Carpet & Floor Sweeper | 1602226

Charger for the Pet Hair Eraser Cordless Carpet & Floor Sweeper - 23T6 Series. | Charger for the Pet Hair Eraser Sweeper | 2032621

Charger for the BISSELL TurboClean Hard Floors Cleaner, series 3548. | Charger for TurboClean Hard Floors Cleaner | 1630729

Grille Assembly for Select Upright Bagless Vacuums, including: Powertrak, Momentum, and Velocity. | Grille for Upper Cyclone for Select Upright Vacuums | 2032415

Filter Frame for Select BISSELL Stick Vacuums, including the CleanView Pet Slim Cordless, Series 2903. | Filter Frame for Select Stick Vacuums | 1626566

Filter Frame holds the Filter in place on the Pet Hair Eraser Cordless Hand Vacuum, Series 1782. | Filter Frame Pet Hair Eraser Cordless Hand Vacuum | 1608654

Dirt Tank Lid for the 1307 ChaCha Lime Series. | Powerlifter Dirt Tank Lid | ChaCha Lime | 1606366

Dirt Tank Separator ChaCha Lime for the 1307 Series. | Powerlifter Dirt Tank Separator ChaCha Lime | 1606934

The Cyclone Assembly includes the inner and outer cyclone. The cyclones play a large role in Multi Cyclonic Separation System. This cleaning system has two stages. The first, or outer cyclone, separat more→es out the larger debris allowing the second stage, or inner cyclones, to separate the fine dust. This sophisticated separation system means that less dirt and debris has to be processed by the vacuums filters, allowing them to stay cleaner longer so the vacuum can continue to provide powerful, non-stop suction. Your vacuum may have reduced performance if dust collects in the cyclone, make sure to check for dust regularly. To clean, wipe cyclones with a wet cloth. Take apart the cyclones to

Includes 5 Dust Bags, 1 Pre-motor filter, 1 Post-motor filter | Dust Bag Accessory Pack for OptiClean Canister Vacuums | 59H6

Charging Adapter fits select Cordless Vacuums including AirRam 1984 Series and Multi Hand Vac 1985 Series. | Charging Adapter for Select Cordless Vacuums | 1610982

Charging Base for BOLT 1311 Series | Charging Base for Bolt 1311 Stick Vacuums | 1604259

For BOLT 1315 Series | Charging Base for Bolt 1315 Stick Vacuums | 1604274

Get your best clean on area rugs from the BISSELL CrossWave Cordless Max or BISSELL CrossWave X7 with our Area Rug Brush Roll. It works safely to refresh area rugs after a puppy accident or for a gene more→ral clean. It's made with scrubby bristles that loosen tough messes up while the powerful suction of the CrossWave Cordless Max sucks the messes into the machine. For best cleaning results around your home, pair this brush roll with BISSELL Area Rug Formula. When youre done cleaning, rinsing the Area Rug Brush Roll is easy with the Self-Cleaning Cycle. This cycle spins the brush roll while also flushing clean water through your machine, so your brush roll isn't just getting rinsed but it's also