Vacuum Cleaner Accessories

The Tank Assembly Includes the tank bladder, tank bottom and tank lid. Together, the assembly collects the dirt and liquid removed from your carpets but also stores the clean water used for cleaning. more→How does it work? Fill the bladder with clean water, the dirty water collapses around the bladder as you clean. This way, the clean water and dirty water never touch. | Complete Tank-in-Tank Assembly | 0159043

Complete Tank-in-tank Assembly includes the bottom tank and lid with handle. Fits select Upright Carpet Cleaners - Model/Series 1799. | Complete Tank-in-Tank Assembly for Select Carpet Cleaners | 1609109

Wheel set for Select Upright Vacuum Cleaners, including PowerForce Compact Vacuums, Series 1520, 2112, 2690. | Wheel Set for Select Vacuum Cleaners | 1606835

Remote for the BISSELL EV675 Multi-Surface Robotic Vacuum, Series 2503. NOTE: Be sure to install batteries in the remote. To Pair the Remote to the Robot follow these instructions: While the Power Swi more→tch is on the side of the robot is OFF, OFF (O), press and hold the play button on the remote for 5 seconds until the clock icon on the display flashes. Continue to hold the play button and turn the robot ON (I). NOTE: The robot will beep three times to indicate that it has successfully paired To Set the Clock follow these instructions: Set the time by pressing the clock button on the Remote Control and holding until the icon flashes on the Remote Control display Use the directional arrows to

The 203-2666 extension wand is needed to fit this 160-1965 to the vacuums upholstery wand. | Bendable Vacuum Extension Wand | 1601965

Tank Baffle DOES NOT come with the plastic bladder. This is ONLY the float and baffle that sits ON TOP of the tank assembly. Tank Baffle Assembly for Deep Clean & ProHeat Essential Upright Carpet Clea more→ners. Includes float and baffle fits on top of the tank assembly and clicks into place on the tank. | Tank Baffle Assembly for Essential Carpet Cleaners | 1601530

Tank Baffle holds the Water/solution bag in place in the collection tank of Select ProHeat Carpet Cleaners. It snaps on top of the collection tank. | Tank Baffle for Carpet Cleaner Collection Tanks | 2030107

Replacement part for 203-1612 | Lift-Off Floors & More Charger | 1600689

In Line Filter Assembly (includes Cap & Filter) for ProHeat 2X Upright Carpet Cleaners (equipped with In Line Filters) and Lift-Off Upright Carpet Cleaners. Fits in the top portion of the foot of the more→Carpet Cleaner, under where the Dirty Water Tank sits on the foot. | In Line Filter Assembly Lift-Off & ProHeat 2X Cleaners | 2037898

Exhaust Filter Cover for the OptiClean Canister Vacuums. | Exhaust Filter Cover for OptiClean Canister Vacuum | 2037985

Cover for the Exhaust and Filter for the Hard Floor Expert Cordless Canister Vacuum Cleaner. | Exhaust Filter Cover for Select Canister Vacuums | 1610628

Pleated Filter Assembly for Select Canister Vacuum Cleaners, including OptiClean, Series 1989D. | Pleated Filter for Select Canister Vacuums | 1610381

Pleated filter for select BISSELL Robotic Vacuums including EV675 Multi-Surface Robotic Vacuum Cleaner, series 2503 and CleanView Connect Robotic Vacuum, Series 2933. To access and clean the filters, more→follow these directions: Press the button on top of the dirt bin and pull to remove Open filter door by pulling both sides apart Empty the debris from the dirt bin Remove the filter cover, followed by the Carbon Foam and Pleated filters. Use the cleaning tool to brush the filter cover and filters. DO NOT WASH THE FILTERS!!! With filters removed, rinse the dirt bin with tap water. Ensure dirt bin is completely dry before re-installing. It is not necessary to wash every time. Once clean,

Note: Your product may require multiple filters. Please find your product using the Product Category, Type, and Product Family options above to locate all of its filters and other parts. | Primary Fil more→ter for the Garage Pro WetDry Canister Vacuum | 2030166

Foam Filter for the Exhaust of the Hard Floor Expert Cordless Canister Vacuum Cleaner - Series 2001. This filter is washable and is recommended to be washed after every third or fourth use and changed more→with a new filter every 6 to 8 months depending on use and how often the filters are clean. Be sure the filter is completely air dry prior to next use. Clean filters will keep the suction power of the machine at optimal levels. | Exhaust Foam Filter for Select Canister Vacuums | 1610629

Carbon Foam Filter for select BISSELL Robotic Vacuums including EV675 Multi-Surface Robotic Vacuum Cleaner, series 2503 and CleanView Connect Robotic Vacuum, Series 2933. To access and clean the filte more→rs, follow these directions: Press the button on top of the dirt bin and pull to remove Open filter door by pulling both sides apart Empty the debris from the dirt bin Remove the filter cover, followed by the Carbon Foam and Pleated filters. Use the cleaning tool to brush the filter cover and filters. DO NOT WASH THE FILTERS!!! With filters removed, rinse the dirt bin with tap water. Ensure dirt bin is completely dry before re-installing. It is not necessary to wash every time. Once clean,

Febreze Vacuum Filter - Eliminates Odors and Freshens as you Vacuum! Did you know that your vacuum, bagless or bagged, has filters that should be checked frequently! Depending on your household, your more→friends at BISSELL recommend replacing your vacuum filters every 3 to 6 months or when performance begins to decline; and more often if you have pets that shed and family/friends that track in dirt and debris. Refer to your BISSELL vacuum owners manual for replacement instructions. Febreze Filters also available at your local Walmart Febreze and related trademarks are owned by The Procter & Gamble Company, Cincinnati, Ohio, and used under license by BISSELL Homecare, Inc. | Febreze Foam Filter

Febreze Foam Filter with the fresh scent of Spring & Renewal for Select Upright Vacuums, including PowerSwift Compact 1808 Series. Leaves your room smelling fresh while you vacuum! | Febreze Foam Filt more→er for Select Upright Vacuums | 1609843

Passive Foot Assembly fits the BISSELL SmartClean Canister, Series 2268. | Passive Foot for Select Canister Vacuums | 1618586

Charger for the Adapt Ion XRT 2-in-1 Cordless Stick Vac, Series 2387. To Charge your Adapt Ion Stick Vac follow these instructions: Insert Charging Adapter plug into the charging port on the back of t more→he unit. Plug the adapter into the wall outlet Charge the unit completely for 8 hours prior to first use | Charger for Adapt Ion XRT Stick Vacuum | 1616327

Foam Filter for the AirRam Stick Vacuums. Does NOT include the inner shroud, this must be purchased separately. Clean the filters at least once a month. More frequent filter cleaning may be necessary more→depending on your usage and environment. Cleaning filters: Firmly hold the AirRam with one hand and pull the dirt bin handle and lift the dirt bin out of the AirRam. Pull the filter out of the dirt bin. Tap the dirt from the filter and tap any dirt from the filter housing. Wash the filter if necessary Firmly hold the filter and with the other hand grasp the separator cap. Gently pull the filter and separator cap apart (Gently twisting and pulling with help separate the two parts) You may gently

The variable suction handle connects to the vacuum hose and the extension wand. This handle comes in PURPLE. | Handle for C4 Cyclonic Vacuums - PURPLE | 1606219