Vacuum Cleaner Accessories

Dirt Tank Foam Filter fits on top of the Collection Dirty Water Tank of Select Upright Carpet Cleaners including TurboClean, PowerClean, PowerForce PowerBrush Turbo - Series 2084, 2085, 2089. Keep thi more→s Foam Filter clean of debris to ensure max suction. | Dirty Tank Foam Filter for Select Carpet Cleaners | 1613175

Dirty Tank for the CrossWave Multi-Surface Cleaner. | Dirty Tank for CrossWave | 1608696

Dirty Tank for BISSELL CrossWave Hard Floor Expert. To empty the Dirty Tank, follow these instructions: Press button on top of dirty water tank, grab front handle and pull out. Hold top of tank near s more→ides of filter and pull up to remove. Pour dirty water into a sink or similar wastewater receptacle and thoroughly rinse tank. | Dirty Tank for CrossWave Hard Floor Expert | 1638381

Dirty Water Tank for CrossWave Pet Wet/Dry Vac, Series 2305, 2306, 2328. Follow these instructions to properly maintain the Dirt Tank on your BISSELL CrossWave Pet. To release dirty water tank, press more→down on recessed button on the top of the dirty tank. Grab the front handle while pressing down on button and pull dirty water tank away from the unit. Grasp top of dirty water tank in recessed areas on each side of the filter and pull upward to remove the top of the tank. Remove strainer from dirty tank then throw debris in the trash. Pour dirty water out. Rinse the inside of the dirty water tank. Remove the filter from the top of the dirty water tank by pulling it up. Hand wash the vacuum

Upper Tank Assembly fits on the Dirt Tank for the PowerForce Helix Turbo Rewind Upright Vacuum - Series 1797 and 2692. | Upper Tank for PowerForce Helix Turbo Rewind Vacuum | 1609901

Clean Tank for BISSELL ReadyClean A3 Robotic Mop, series 3571. | Clean Tank for ReadyClean A3 | 1631645

Clean Tank Assembly in Purple for Select BISSELL Carpet Cleaners, including PowerForce PowerBrush Pet XL Carpet Cleaner, series 3071. Follow these instructions to fill the clean water tank. NOTE: Fill more→with warm (140 F / 60 C MAX) tap water and add the appropriate BISSELL formula. Do not use boiling water. Do not heat water or tank in microwave. The Clean Water Tank is on the top of the machine. Lift the Clean Water Tank straight up to remove from the machine. Unscrew the yellow cap from the Clean Water Tank. Fill the Clean Water Tank with water and formula, following Fill lines on the tank. Screw the cap back onto the Clean Water Tank. Align tank with grooves on the machine. Slide tank down

Water Tank for Steam Mops. Does not include Cap and Insert. | Water Tank for Steam Mops | 1603246

Dirty Tank Gasket Assembly (includes 2) for the Lift-Off Upright Carpet Cleaners. | Dirty Tank Gaskets for Lift-Off Carpet Cleaners | 2037918

Dirty Tank Lid Assembly for Select BISSELL CrossWave Wet Dry Vacs. Click on View Products to see if this Dirty Tank Lid fits your CrossWave | Dirty Tank Lid Assembly | 1632967

Old part number 203-7449. Tank fits on top of the Dirty Water Tank. Fits Big Green Upright Carpet Cleaner. | Dirty Tank Lid Assembly w/ Handle - Big Green Machine | 1605234

Dirty Tank Lid for the BISSELL CrossWave Cordless Max Multi-Surface Wet Dry Vac. | Dirty Tank Lid CrossWave Cordless Max | 1620627

Dirty Tank Lid for BISSELL CrossWave HydroSteam Multi-Surface Wet Dry Vac. | Dirty Tank Lid CrossWave HydroSteam | 1634580

Clean Tank Lid for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. | Clean Tank Lid CrossWave X7 | 1626665

Dirty Tank Lid in GrapeVine Purple for BISSELL CrossWave X7 Cordless Pet Pro Multi-Surface Wet Dry Vac. | Dirty Tank Lid - GrapeVine Purple - CrossWave X7 | 1626680

Dirty Tank Lid for the BISSELL JetScrub Pet Carpet Cleaner, Series 2529. | Dirty Tank Lid JetScrub | 1617949

Rubber Dirty Water Tank Plug for the Pet Stain Eraser Cordless Portable Carpet Cleaner. Series 2002, 2003, 2054. Ensure the unit is OFF and set upright on a flat surface. Simply push up on the release more→button located on the top of the tank to remove. Carefully remove the dirty water tank from the unit and carry to the sink. To prevent spills, hold the tank vertically after removing. To empty pull tab at the end of the tank and empty to remove the dirty water. Rinse out the dirty tank with clean water after emptying. Clean the tank plug and return tank to the unit. Ensure the tank is secure before use. | Dirty Tank Plug for Pet Stain Eraser Portable Cleaner | 1611735

Clean Tank fits the PowerEase & Total Floors Wet/Dry Hard Floor Cleaners. | Clean Tank - PowerEase & Total Floors Wet/Dry Cleaners | 2038370

Clean Tank Receiver for Select BISSELL Carpet Cleaners. | Clean Tank Receiver | 1634222

Water Tank with the Cap and Insert for the PowerFresh Steam Mop Hard Floor Cleaners. | Water Tank w/ Cap and Insert for PowerFresh Steam Mops | 2038412

Clean Tank with the Cap for the BISSELL CrossWave Cordless Max Multi-Surface Wet/Dry Vac. To Fill the Clean Water Tank, follow these instructions: The Clean Water Tank is located on the back of the ma more→chine. To remove, use the finger groove above at the top of the tank to grab and pivot the tank backwards Unscrew the cap from the bottom of the Clean Water Tank Choose the right BISSELL formula The Clean Water tank has a Large Area volume and a Small Area volume. Pick one of the measuring volumes that best suits the space that you would like to clean. The Large Area fill lines are for areas up to 700 sq ft. The Small Area fill lines are for areas under 350 sq. ft Use warm (140F/60C max) tap

Clean Tank Assembly with Cap in Black for select BISSELL Carpet Cleaners, series 2806, 2987. Follow these directions to fill the Clean Water Tank: Remove the Clean Water Tank by lifting straight up an more→d away from the machine. Unscrew the cap at the bottom of the tank. Fill with hot (140 degree F/ 60 degree C MAX) tap water to the WATER line. Do not use boiling water. Do not heat water and/or tank in the microwave. Add BISSELL formula to the FORMULA line. Replace and tighten the cap. Replace the tank on the machine until it "clicks" into place. | Clean Tank w/ Cap - Black for Select Carpet Cleaners | 1623828

Water Tank comes with Cap and Insert for the SteamReady Steam Mop - Model 1464 | Water Tank w/ Cap & Insert for SteamReady Steam Mop | 1604920

Clean Tank for SpotClean Models 5207 series, 7786 series, 9749 series and 1570 series. Fill formula and water to specified fill lines as directed. | Clean Tank with Cap for SpotClean Carpet Cleaners | 1606553