Wi-Fi Equipment TrippLite

Compatible with Windows, Mac and Linux-works with most computers USB-powered, so no bulky or obtrusive external power supply is required Auto-detects and -switches RS-422 and RS-485 serial devices Independent DIP switch controls provide easy port configuration Automatically reassigns COM values to each port to avoid additional configuration 2-year limited warranty USB to serial converter lets you connect two 9-pin serial devices to your computer or laptop's USB-A port.

Tripp Lite's U436-06N-GB USB-C Network Adapter lets you instantly connect a USB-C or Thunderbolt 3 device to a Gigabit Ethernet network using a single Ethernet cable. This small-but-powerful adapter connects directly to your device's USB-C or Thunderbolt 3 port with no software, drivers or external power required. Simply plug it in, connect it to your network, and you're ready for action. With the reliability of a wired connection, you can transfer large amounts of data with confidence - or stream audio and video without fear of interruption. Unlike traditional USB cables that can only be attached one way, the U436-06N-GB's reversible Type-C connector plugs into your device's USB-C or Thunderbolt …

Compliant with USB 3.0, 2.0, and USB 1.1 specifications Windows, Mac, and Linux compatible

Tripp Lite's U236-000-R USB 2.0 Ethernet Adapter allows your computer to instantly connect to a 10/100Mbps network through a USB port - no need to open up your computer case to add an internal Ethernet card. The adapter's compliance with USB 2.0 (480Mbps) ensures true 10/100 Mbps network speed without any compromise. Furthermore, the adapter is compact and is USB bus-powered; requires no external power adapter. Windows, Mac, and Linux compatible Compliant with USB 2.0 and USB 1.1 specifications Create a network port on a computer via USB

Hot-pluggable for installation without rebooting or shutting down Data transfer rates up to 1 Gbps Transmits up to 328 ft. (100 m) with RJ45 cabling 10/100/1000 auto-sensing RJ45 port with auto MDI/MDI-X support

Manufacturer: Tripp Lite Manufacturer Part Number: N28601GSXG UPC: 037332283962

This USB to LAN converter expands the potential of your tablet, laptop, Chromebook, MacBook, smartphone or PC's USB-C or Thunderbolt 3 port. It's ideal for connecting to a wired Gigabit Ethernet network or powering and charging a PD Charging-compliant mobile device. The RJ45 port offers access to a Gigabit Ethernet network when no Wi-Fi is available or when a wired connection offers faster speeds. Connect using a UTP cable (sold separately), and enjoy true 10/100/1000 Mbps Ethernet speeds for fast data transfers. The USB-C Power Delivery (PD) port provides power and charging to the PD Charging-compliant device (such as a MacBook, Chromebook or Android smartphone) the USB-C network adapter is …

Eaton Tripp Lite Series Unmanaged Industrial Gigabit Fiber to Ethernet Media Converter, 10/100/1000 Mbps, RJ45/SFP, -40° to 75°C, DC Power, TAA - 1 x Network (RJ-45) - Multi-mode, Single-mode - Gigabit Ethernet - 10/100/1000Base-T, 100/1000Base-X - 1 x Expansion Slots - SFP (mini-GBIC) - 1 x SFP Slots - DIN Rail Mountable - TAA Compliant

The T010-001-K Multi-Function Cable Tester is an essential tool for cable installers or anyone working in telecom or LAN environments. It allows you to test RJ45 (STP/UTP), RJ11, BNC and USB cable wiring, length, fault and location, as well as common metal wires using the included alligator clip adapter. For instance, you can test wiring for open, short, cross, reverse and pairing connection. You can also track the location of an open circuit position, and determine the length of a cable - whether in a wall or on a spool - up to 4,920 feet (1,500 meters). The easy-to-read LCD interface includes a calibration function that lets you load saved data. Powered by included 9-volt batteries, the T010-001-K …

Tripp Lite N844-LOOP-12F MTP / MPO OM3 Fiber Optic Loopback Tester is typically used for test and measurement procedures in networking environments. The device is ideal for a multitude of applications that require signal looping in a MTP / MPO form factor. Features push-pull tab for easy disconnect. A dust cap is included for protection during storage. More from the Manufacturer

Eaton Tripp Lite Series Mini Bluetooth 5.0 (Class 2) USB Adapter - USB 2.0 Type A - 3 Mbit/s - External

Eaton Tripp Lite Series 1-Port Industrial USB over Cat6 Extender, ESD Protection, PoC - USB 2.0, Mountable, 150 ft. (45.72 m), TAA - 1 Input Device - 1 Output Device - 150 ft Range - 2 x Network (RJ-45) - 2 x USB - Twisted Pair - Category 6 - Rack-mountable - TAA Compliant

Tripp Lite SC Multimode Fiber Media Converter Gigabit 10/100/1000 RJ45 550M 850nm - 1 x Network (RJ-45) - 10/100/1000Base-T, 1000Base-SX - Desktop

This product is covered by a Lifetime Limited Warranty Complies with Federal Trade Agreements Act standards for GSA Schedule purchases Built to protect Gigabit Ethernet and digital signage connections in harsh environments IP68-rated to resist dust and endure immersion in 1.5 m of water up to 60 min. Shielded to protect against EMI/RFI line noise that can destroy data or affect equipment Connects two Cat5e/6 patch cables in industrial environments that require protection against dust, debris and moisture.

1 x Network (RJ-45) 1 x SC Ports DuplexSC Port Single-mode Gigabit Ethernet 10/100/1000Base-T, 1000Base-X

Tripp Lite N785-P01-SC-MM2 Transceiver/Media Converter

Tripp Lite N785-P01-LC-MM1 Transceiver/Media Converter

Tripp Lite N785-INT-SC-SM Transceiver/Media Converter

Backward compatible with previous Bluetooth versions Wireless range up to 164 ft. (50 m) Connects up to 7 devices simultaneously Data transfer rates up to 3 Mbps Compliant with Bluetooth 4.0 LE+EDR Class 1

Extends a Gigabit Ethernet signal up to 550 meters over Multimode Fiber Optic Cable Auto detects Full/Half Duplex Transfer Mode Supports Multimode 50/125 cable up to 550M or 62.5/125 cable up to 400M 850nm wavelength

With Twisted Pair cable, get the desired data transfer rate up to a required distance With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over supported network cable Expand your network capacity and fulfill requirement with this 2 transceiver/media converter

100% compatible with HP networking hardware Transmits up to 6 mi. (10 km) with 9/125 SMF cabling Supports Digital Diagnostic Monitoring Complies with MSA standards Supports data transfer rates up to 1 Gbps

Up to 3 E2 modules can be daisy-chained together USB cable included Attaches magnetically to most racks and cabinets Measures and monitors ambient temperature Compatible with Tripp Lite's free downloadable PowerAlert software Enables remote control of peripherals, such as beacons and alarm signals Supports both AC- and DC-powered peripherals Built-in cable harness reduces clutter Compatible devices include WEBCARDLX, WEBCARDLXS, PDU3XE-Series PDUs and PDU3E-Series PDUs

Tripp Lite Cisco Compatible Glc-Te-Sf Transceiver 10/100/1000Base...