Wi-Fi Equipment Startech.com

VDSL2 EXTENDER: Extend a network over VDSL2, using UTP/single pair wire, CAT5e/6, or phone line cabling. Up to 0.6mi (1km). Up to 300Mbps (aggregated) at shorter distances. Supports VDSL2 35b/30a/17a, ITU-T G.993.5 G.Vectoring, and G.998.4 G.INP standards
8 PROFILE CONFIGURATIONS: Customize the installation with DIP switch selectable settings. Choose between Master or Remote mode, Symmetric or Asymmetric mode, G.INP or Interleave mode, and fine-tune SNR with High and Low options for optimal performance
INTUITIVE INDICATORS: Gigabit Ethernet Extender features four LEDs that provide a visual indication of network status, including LAN speed, link status, power, and remote/master mode, allowing …

INLINE CAPABILITY: You can place the HDMI signal booster inline between two HDMI cables, up to 82 ft. in length at the video input, and up to 33 ft. in length at the video output.
SIMPLE INSTALLATION: The HDMI booster mounting hardware is included. No CAT5 or CAT6 cable infrastructure required. A power adapter is not required for standard applications, SVUSBPOWER sold separately.
EASILY CUSTOMIZABLE: The HDMI extender features an equalization switch with ten different levels. The switch lets you adjust the amplification of your signal based on the distance of your cables.
LONG DISTANCE CAPABILITY: When extending HDMI over long distances, higher resolutions can become unavailable. Using the …

ETHERNET LAN EXTENDER: Unmanaged single-port dual-speed (10/100Mbps) RJ45 network extender kit. Reach distances of up to 0.5mi (800m) to overcome the typical limit of 328ft (100m) for Cat5/Cat5e/Cat6 copper Unshielded Twisted Pair (UTP) Ethernet cable
EXTENDED RANGE: Use one or two pairs of cable for variable bandwidth and distance. Reach up to 984ft (300m) at 100Mbps using a single-pair Ethernet cabling & up to 2,624ft (800m) at 10Mbps using two-pair ethernet cabling
FEATURES: Network extension kit acts as a transparent network device seamlessly passing Ethernet protocols. IEEE 802.1q VLAN tag pass-through, WoL, 16K jumbo, PXE, and more. Supports RJ11/phone line cabling. Includes power adapters …

Add Bluetooth capability to your laptop or desktop Add Bluetooth wireless capabilities to a laptop or desktop computer through an available USB port. Connect to a wide range of peripherals, including headsets, speakers, keyboards and other devices. Provides data transfer rates up to 3 Mbps. Ultracompact design can stay plugged into your computer, even when it's in a case or bag. Backwards compatible with Bluetooth 3.0, 2.x and 1.x devices.

Backward compatible with Bluetooth v3.0, 2.0, 1.2 and 1.1 devices Ultra-compact form factor Class 1 device with 50m (165ft) effective range Support for Enhanced Data Rate (EDR) with data transfer rates up to 3 Mbps Low power consumption Power / Linking / Standby LED indicator Bluetooth® 4.0 LE compliant Bluetooth Smart Ready transceiver

Easy to configure using Windows based setup program or web-based management Full-duplex support Compatible with most standard printers Print from any network computer, across the office Jumbo frame support Provides a reliable Ethernet connection with 10Base-T/100Base-TX auto-sensing Auto MDI-X support Compliant with USB 2.0 Supports LPR network printing, Bonjour Print Services Share a single USB printer with multiple users over a network

The ET91000SC2 1000 Mbps Gigabit Multimode Fiber Media Converter (SC, 550m) lets you extend a Gigabit Ethernet network over multimode fiber, at distances up to 550m (1804 ft). A cost-effective solution for connecting a Gigabit Ethernet (1000Base-T) network to remote network segments over a (1000Base-LX/SX) fiber backbone, the GbE to MM fiber converter supports full Gigabit speeds for ideal network performance and scalability. Designed to offer a durable and convenient Ethernet to fiber solution, this Ethernet to SC Fiber converter features an all-steel chassis and a simple plug-and-play installation with minimal configuration required.For added versatility, the fiber media converter supports …

Easy to use and install Supports full or half-duplex operation Cost-effective way to extend/bridge networks using fiber cabling Advanced features include Link-loss forwarding, remote status monitoring, two frame lengths Maximum Fiber Cable length of 30 km Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis

If you're passionate about IT and electronics, like being up to date on technology and don't miss even the slightest details, buy Multimode Media Converter Startech ET90110SC2 Black at an unbeatable price.. Colour:. Black. White. Connections:. SC x 1. 1 x RJ45. RJ45. Material: Steel. Voltage: 12 V. Power supply: Wired. AC input: 100-240 V. Includes: Adapter AC. Certificate: RoHS. Contains: User manual

100% CISCO SFP-H10GB-ACU10M COMPATIBLE: Works with Cisco switches like Firepower, ASR9000, ASR1000, C9300, C3850 and others
TECHNICAL SPECS: 10m (32.8ft) | 10 Gbps | Active Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant
TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches
WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers

100% HPE J9151D COMPATIBLE SFP+ TRANSCEIVER: Works with HPE switches like 2540, 2920, 2930M, 3800, and others
TECHNICAL SPECS: 10GBASE-LR, 10Gbps, Single Mode (SMF), LC Connector, 1310nm, Digital Diagnostic Monitoring (DDM), Distances up to 10km (6.2mi)
TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in HPE routers and switches. DDM support reports the transceiver's status to most SNMP network management tools
WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules

If you're passionate about IT and electronics, like being up to date on technology and don't miss even the slightest details, buy USB to Ethernet Adapter Startech USB31000S2 Grey 0,3 m at an unbeatable price.. Interface: USB. Colour: Grey. Material: Plastic. Connection: USB. Connections:. RJ-45. USB. 1 x RJ45. USB 3.2 Gen 1 (3.1 Gen 1). Cable length: 0,3 m. Characteristics:. USB Connection. LED indicator. Connectivity:. Cable. Ethernet. Operating System: Linux. Compatible: Chrome OS. Data transfer: 5000 Mbit/s. Suitable for: Notebook. Speed: 10/100/1000 Mbps. Accuracy (relative humidity): 10 % - 85 %

With Mini USB interface, you can easily have instant wireless communication between your devices Equipped with low-energy protocol support, offers a cable-free connectivity solution

The SFPSXMM Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to increase performance and connectivity of your fiber-connected network devices.Using a short wavelength (850nm) VCSEL laser diode, enabling a maximum cable distance of 550m (0.3 miles) over multi mode fiber, this Small Form Factor Pluggable (SFP) Gigabit Multi Mode module can be installed into any fiber networking devices with an MSA compliant SFP port, providing a simple solution to upgrade existing network devices to connect to remote locations using LC terminated multimode fiber.Delivering convenience and scalability,…

WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules TECHNICAL SPECS: 1000BASE-SX | 1 Gbps | Multi Mode (MMF) | LC Connector | 850nm | Distances up to 550m (1804ft) TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by StarTech.com for the life of the module itself, not your equipment; our modules won't void your OEM support and with access to our Tech Advisors 5/24 100% CISCO GLC-SX-MM COMPATIBLE: Works with Cisco switches like IE3400, IE3300, IE3200, ME1200, ME2400 and others

WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules TECHNICAL SPECS: 1000BASE-LX/LH | 1 Gbps | Single Mode (SMF)/Multi Mode (MMF) | LC Connector | 1310nm | Distances up to 10km (6.2mi) TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by StarTech.com for the life of the module itself, not your equipment; our modules won't void your OEM support and with access to our Tech Advisors 5/24 100% CISCO GLC-LH-SM COMPATIBLE: Works with Cisco switches like IE3400, IE3300, IE3200, ME1200, ME2400 and others

The SFPG1320C Cisco Compatible Gigabit Fiber SFP Transceiver Module SM LC - 20 km (12.4 miles) is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade a Single-Mode LC port on your Gigabit fiber networking equipment or fiber media converter. Supporting data rates up to 1.25 Gbps as well as Digital Diagnostics Monitoring (DDM), this LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port.• Data rates up to 1.25 Gbps• Supports distances up to 20 km (12.4 miles)• Complies with SFP Multi-Source Agreements standards (MSA)• Compatible with Cisco equipment• …

WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules TECHNICAL SPECS: 1000BASE-T | 1 Gbps | Copper | RJ-45 Connector | Distances up to 100m (328ft) TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Cisco routers and switches OUTSTANDING SUPPORT: Backed by StarTech.com for the life of the module itself, not your equipment; our modules won't void your OEM support and with access to our Tech Advisors 5/24 100% CISCO SFP-GE-T COMPATIBLE: Works with Cisco switches like IE3400, IE3300, IE3200, , and others