Wi-Fi Equipment PLANET

Dual-WAN failover and Dual-WAN load balancing SSL VPN and robust hybrid VPN (IPSec/PPTP/L2TP over IPSec) Stateful Packet Inspection (SPI) firewall and content filtering Blocks DoS/DDOS attack, port range forwarding High Availability, AP Controller, Captive Portal and RADIUS IPv6, SNMP, PLANET DDNS and Universal Network Management System Compliant with the IEEE 802.3at PoE+ with PD alive check/schedule management

IPX-21FO

ICG-2510W-LTE-EU

Ports: 5 10/100/1000TX (3xLAN, 1xWAN, 1xLAN/WAN) + 1 USB Power Requirements: 9~48V DC, 1A Power Consumption: 9W Operating Temperature: -40º to 75ºC Features: Dual-WAN Failover and Load Balancing, Cyber Security, SPI Firewall, Content Filtering, DoS Attack Prevention, Port Range Forwarding, SSL VPN and robust hybrid VPN (IPSec/GRE/PPTP/L2TP), IPv6, SNMP, QoS, VLAN, IGMP TAA Compliant Note: ALL Industrial products do NOT include a power supply.

One 10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto MDI/MDI-X function One 10GBASE-X SFP+ slot interface 1/2.5/5/10Gbps full duplex mode

1 Gbps 1000Base-SX

15 open slots for media converters, 2 power slots (1 included, 1 optional) 100-240V AC, 3.3A, 50~60 Hz 80 Watts / 272 BTU

1-port 10/100/1000 Mbps RJ-45 interface, auto-negotiation and auto MDI / MDI-X 1-port Gigabit Fiber Interface DIP switch: LFP (Link Fault Pass-through) mode selection Complies with IEEE 802.3af and IEEE 802.3at standard, End-Span PSE 24V / 48V DC Power Input for Po E Provides DC 52V power over RJ-45 Ethernet cable to devices with Ethernet port Supports Po E Power up to 30 watts for Po E port

1-port 10/100/1000BASE-T RJ45 with auto MDI / MDI-X function 1 x SFP interface, 100/1000BASE-X dual mode (auto detection) IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet standard compliant Supports auto-negotiation and 10/100 Mbps half / full duplex and 1000 Mbps full duplex mode Slim-type IP30 metal case DIN rail and wall-mount design

1-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function 2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Supports auto negotiation and 10/100 Mbps half / full duplex and 1000 Mbps full duplex mode 9K Jumbo Frame Size support Slim IP30 metal case protection

DB15 to 100FX Fiber Connection: LC

10/100/1000TX to 1000FX SFP Fiber Connection: LC

10/100/1000TX to 1000SX/LX Mode: Single Mode WDM Wavelength: TX: 1550nm, RX: 1310nm Fiber Connection: SC

1 x 10/100/1000Base-T port 1 x 1000Base-SX/LX port

10/100/1000TX to 1000LX Mode: Single Mode Wavelength: 1310nm Fiber Connection: SC

10/100/1000TX to 1000LX Mode: Single Mode Wavelength: 1310nm Fiber Connection: SC

10/100/1000TX to 1000SX Mode: Multi-Mode Wavelength: 850nm Fiber Connection: SC

10/100/1000TX to 2 x 1000FX SFP Fiber Connection: LC