Speakers Morel
prices on 20 modelsWhen you make a purchase through links on our site, we may receive a affiliate commission.
![]() | Morel's CAT378 features a hand treated 1-1/8" soft dome, horn loaded for higher efficiency and high dynamic range without power compression. |
![]() | A new version of Morel's classic MDT-30, the CAT308 is a very fast tweeter capable of high dynamic range without SPL compression. |
![]() | An updated and more cost effective version of the famous MDT-29 and MDT-33, the CAT298 also features a treated 1-1/8" soft dome, ferrofluid cooling, and aluminum voice coil. |
![]() | Morel engineered the TSCT1044 1" Supreme series silk dome tweeter pair to deliver high efficiency, flat response, and incredibly low distortion. As the flagship tweeters from Morel, these combine over 40 years of technology and advancement to produce the purest and most detailed high frequency output possible. The TSCT1044 features a powerful neodymium motor, underhung Hexatech aluminum voice coil, titanium former, copper shorting sleeve, and more. In addition, these tweeters are sold in hand matched pairs to ensure consistent response between units. |
![]() | For serious speaker builders that demand the world's best drivers, look no further than Morel's Titanium Supreme series midrange. The 6" TSCM 634 features an underhung 3" Hexatech voice coil on a titanium bobbin for ultra-quick transient response, a Uniflow chassis for reduced power compression, and a copper-sleeved pole piece for reduced inductance. |
You may be interested in
![]() | The Morel TM4055-8, lovingly referred to as the TweeMid, is an exquisite pairing of a 2" dome midrange, and a 1-1/8" dome tweeter on an easy to install plate. These drivers are designed to be paired in close proximity to each other, and offer a very flat summed response with excellent on and off axis response. |
![]() | The MDT 39 is a super high quality tweeter of small dimensions (the faceplate measures only 2-1/8" x 2-1/8")! This is achieved by use of an ultralight, powerful neodymium magnet coupled to a rear chamber for low resonance. |
![]() | A more cost effective version of the famous MDT 33. The MDT 29 also features a treated 1-1/8" soft dome, ferrofluid cooling, and aluminum voice coil, but without the double magnet system and damped rear chamber. Very smooth on and off-axis frequency response. |
![]() | By adding a rear chamber to the MDT-12, a lower resonance point and superior low-frequency performance are achieved. The tweeter has a very rich and full sound, and can easily accommodate crossover points as low as 2k, making it work great with most woofers. |
![]() | Morel's MDT-12 1-1/8" soft dome neodymium tweeter features the clean, transparent sound reproduction for which the company is famous, but offers it in a much smaller package. |
![]() | No compromise 2-1/8" treated soft dome midrange designed for high end multiple speaker systems. It employs a powerful neodymium magnet (22 times stronger than ferrite!) enabling this unit to be both compact and ultra lightweight. |
![]() | Morel designed the Integra 624 6" driver from the ground up to push the limits of what is possible with coaxial drivers. By using a huge 2.1" voice coil on the woofer, Morel concentrically mounted the 1.1" soft dome tweeter allowing for near perfect time-alignment with amazing off axis consistency. |
![]() | Morel designed the Integra 524 5" driver from the ground up to push the limits of what is possible with coaxial drivers. By using a huge 2.1" voice coil on the woofer, Morel concentrically mounted the 1.1" soft dome tweeter allowing for near perfect time-alignment with amazing off axis consistency. |
![]() | Morel designed the Integra 424 4" driver from the ground up to push the limits of what is possible with coaxial drivers. By using a huge 2.1" voice coil on the woofer, Morel concentrically mounted the 1.1" soft dome tweeter allowing for near perfect time-alignment with amazing off axis consistency. |
![]() | The Morel ET448 Elite tweeter is based on the famous Morel MDT 44 compact soft dome tweeter and its unique qualities. Featuring IDR™ (Improved Dispersion Recess), improved magnets and aluminum faceplates. Small faceplate for close placement to woofer or midrange for improved sound integration. |
![]() | This pair of Morel ET338 Elite tweeters is acoustically matched from the manufacturer and based on the unique qualities of the famous Morel MDT 33. |
![]() | This pair of Morel ET338-104 Elite tweeters is acoustically matched from the manufacturer and based on the unique qualities of the famous Morel MDT 33. |
![]() | Features IDR™ (Improved Dispersion Recess), a neodymium magnet, aluminum faceplate, hand coated soft dome, Hexatech aluminum voice coil, rear chamber loading, gold plated terminals, and full shielding to allow A/V use. |
![]() | The CAT408 is virtually identical to the superb MDT-39 but with one very important difference: it employs Morel's Hexatech aluminum voice coil technology to improve efficiency and greatly improve power handling (to 120 watts RMS!). |
![]() | A Parts Express exclusive! Morel has produced an easy-to-install round version of their legendary MDM 55 dome midrange. Perfect for custom installations requiring flush mounting. |



















