Comparison Samsung RF23R62E3S9 stainless steel vs Whirlpool W5 911E OX stainless steel

The type of refrigerator is specified if the design of the unit differs markedly from the classic one (vertical layout, one or more doors for the entire width of the device). Nowadays, there are three main varieties of such non-standard models: Side-by-Side and French door refrigerators, as well as display refrigerators. Here is a more detailed description of each of these varieties:

— Side-by-Side. Refrigerators of this type have at least two doors stacked side by side (hence the name). If there are more than two doors, then at least one of them occupies the entire height of the unit. It is how similar models differ from French Door refrigerators (see below). Another difference is that the compartments in the Side-by-Side models have a vertical layout: the freezer is usually located on the side and is completely covered by one of the doors. Anyway, refrigerators from this category have large dimensions and high capacity. They are designed for spacious kitchens and large amounts of food.

— French Door. It is a specific variation of the Side-by-Side models described above: French Door refrigerators also have a large width and side-by-side doors. The main fundamental difference lies in the internal layout: the refrigeration compartment in such units is located horizontally, across the entire width of the unit. In addition,...in traditional French Door models, not two but four doors are provided — two pairs at different levels. There is also another, rarer version of the design — two doors on top (side by side) and drawers for the entire width of the unit from below. However, the refrigerator compartment in such models necessarily has a pair of doors. Anyway, the specifics of using French Door refrigerators are similar to Side-by-Side: these are spacious units designed for kitchens with a lot of free space. Their main advantage lies in the fact that the layout of the “2 doors per chamber” format allows you to reduce cold losses when opening: in the classic French Door, opening one door opens only half of the refrigerator or freezer, while in Side-by-Side models the corresponding chamber opens entirely. Yes, and the location of the cameras one above the other, many users find it more convenient than side-by-side. On the other hand, numerous doors complicate and increase the cost of the design.

— Display refrigerators. Refrigerators intended primarily for commercial use. The main feature of such units is transparent doors that allow you to see the contents without opening the chamber and without violating the temperature regime. As for other specifications, display refrigerators cases usually have a traditional vertical layout, small or medium volume and are not equipped with freezers. At the same time, there can be two chambers in the design, but they not always have separate temperature control — the meaning of this design is primarily to reduce cold losses with each opening and optimize the distribution of contents over the internal volume. Anyway, display refrigerators are especially suitable for the sale of chilled drinks. Although, they can also be used for food products that require storage at low (but not sub-zero) temperatures.

The total capacity of the refrigerator is the total capacity of all the main working chambers: refrigerating, freezing, zero, and wine chambers. The set of these chambers, of course, will be different in different models (see more about them above). Here we note that large volumes, on the one hand, simplify the storage of numerous products and, on the other hand, affect the dimensions and price of the unit. It is also worth considering that refrigerators of the same total capacity may differ in the capacity of individual chambers.

The refrigeration circuit can be described as a heat sink system that has a separate connection to the compressor (see “Number of compressors”) and a separate, independent from other similar systems, regulation of the operating mode.

In the most common variety of modern refrigerators — two-chamber models with a freezer — both one common circuit for both chambers and 2 circuits can be provided. The second option is more expensive, but it gives an important advantage — in such refrigerators, you can completely independently control the operating modes of the refrigeration and freezer compartments. If there is only one circuit, these adjustments turn out to be interconnected: for example, when you turn on the fast freeze mode (see "Features"), the main chamber also starts to work at increased cooling power, which is not always desirable.

As for refrigerators with three or more chambers, usually, the number of circuits in them is less than the number of chambers — otherwise, the design would be unnecessarily complex, cumbersome and expensive.

The No Frost function prevents the formation of frost inside the refrigerator. The general principle of its operation is that excess moisture is blown out of the working chamber by a special fan, not having time to settle on the walls and form frost.

This function is most relevant for the freezer, although it is technically easy to provide in the refrigerator. Therefore, refrigerators with No Frost in all compartments are the most popular nowadays, much less often this system is installed only in the freezer, and extremely rarely — only in the refrigerator (usually in such models there is no freezer at all).

The No Frost function significantly simplifies the user's life. It eliminates the need to manually defrost the refrigerator and even eliminates the need for automatic defrosting systems (see "Features"). The reverse side of this convenience is that such systems absorb moisture not only from the air but from the food inside too. So for long-term storage, the contents must be tightly packed — otherwise, it dries quickly. In addition, the presence of No Frost inevitably increases the overall cost of the fridge. So if these moments are critical for you, the fridges without No Frost may well be the best choice.

Various special features provided in the refrigerator, such as holiday mode, control via smartphone, child lock, ( LED display or TFT display), door alarm reversible door. And now in more detail:

— Holiday mode. A special mode of operation in case of a long absence of users — when there is no foodstuff in the refrigerating chamber and there is no need for the unit to work intensively. In holiday mode, the temperature inside is maintained at about 12 °C; this prevents the growth of mould and unpleasant odours, while the energy consumption is very low.

— Control via smartphone. The ability of access to control the refrigerator via the Internet. The refrigerator, usually, is connected to the World Wide Web using Wi-Fi — via a router or a smart home system. The convenience of this function is obvious: it allows you to control the operation of the unit from anywhere in the world where there is an Internet connection. However, the specific implementation of such control may be different: some models of refrigerators use an application installed on a smartphone or tablet, and others allow you to work through a web page available in any browser. However, the user can thus obtain various data on the unit's operating mode (temperatur...e and humidity in the chambers, the use of special functions, malfunctions and emergencies, etc.) and, if necessary, change its settings.

— Child lock. Various features to keep your refrigerator safe from small children. Often, it means blocking the control panel — so that a curious baby cannot change the settings.

— Display. Refrigerators of any level can be equipped with displays — from the simplest to the most advanced. Anyway, the screen provides additional convenience in operation: it can display various detailed information about the operation of the unit, as well as other useful data (for example, time). But the specific type of display may be different.
— LED display. Usually, they are very simple — they display one colour (maximum two or three basic colours) and a limited set of characters (numbers, individual letters and some special icons). However, such limited functionality is enough even for fairly advanced refrigerators, and LED displays are inexpensive.
— TFT display. These are already the most functional screens — like those used in smartphones, tablets, etc. They are capable to display a huge variety of information and can even be made touch-sensitive. And some units with TFT displays are not just refrigerators at all but multifunctional smart home components. However, such an appliance costs accordingly.

— Door alarm. An alarm system that warns that the refrigerator door is open for a long time (or not closed tightly enough). After some time after opening, such a system gives a signal (usually sound), notifying the user of the need to check the status of the door. It avoids a critical increase in temperature in the refrigerator chamber and damage to the contents. In some models, this system is also complemented by a light indicator that confirms the correct closing of the door — this further reduces the risk of leaving the refrigerator loosely closed.

— Reversible door. The ability to choose from which side the hinges on the refrigerator door will be located and, accordingly, in which direction it will open. It allows you to optimize the space in the kitchen, providing access to the contents of the unit from the most convenient side. Please note that this function is only available for classic design models, including display refrigerators (see “Product type”). In Side-by-Side and French Door refrigerators it makes no sense to provide this feature.

These features relate exclusively to the design and overall appearance of the refrigerator. These features include glass door panel, hidden door handles, handle illumination, customizable panels and retro design. Here is a detailed description of all these items:

— Glass door panel. Refrigerators with this feature have glass doors on the outside. This finish does not affect the functionality of the device but gives it a stylish appearance due to the specific glare on the glass surface. And in some models, a decorative pattern can also be applied to the glass. In addition, such a coating is very resistant to scratches. Its disadvantage is a rather high cost. So the glass door panel is typical mainly for “designer” refrigerators, created with an emphasis not only on functionality but also on the rich design.

— Hidden door handles. Handles made in the form of recesses on the ends of the refrigerator doors. They can be located on the top, bottom and/or side, depending on the design of a particular unit and the location of the door itself. Anyway, thanks to the hidden handles, the refrigerator at least acquires a neat, discreet appearance — with a minimum of unnecessary details on the doors. In addition, a regular handle can be touched by careless movement, but with a hidden one, it is impossi...ble. It is especially relevant in cramped conditions. On the other hand, not all users find hidden handles comfortable enough. Therefore refrigerators with doors of a more traditional design nowadays also continue to be produced.

— Handle illumination. This feature not only gives the refrigerator an interesting appearance but also makes it more visible in low-light conditions. The latter can be useful not only in the evening or at night but also at other times of the day — if the unit is installed in a place that is itself poorly lit. However, there are few models with illuminated handles on the market, and they mainly belong to the middle and premium class.

— Customizable panels. Replaceable panels that allow you to change the appearance of the refrigerator. This feature does not affect the functionality, but it makes it possible to optimally choose the design for the interior of the room and the tastes of the owner. Some units with this feature are initially supplied without decorative panels in the expectation that users themselves choose or order a pattern at their discretion. On the other hand, the real need to use customizable panels rarely arises — even for a non-standard interior, it is easier to choose a refrigerator that was originally made in a certain design. So there are very few models with this feature nowadays.

— Retro design. Refrigerators made in the style of "retro" — in other words, semi-antique. Typically, such models imitate the technique of the 50s — 60s of the twentieth century, with rounded body shapes, massive handles, etc. However, there are other design options — the old sideboard, or even completely non-standard, in the form of a car, aeroplane, etc. Anyway, completely modern technologies are usually hidden under such a case. And the original appearance can be very useful for an interior in an unusual style. On the other hand, it is worth considering that retro design is very expensive. Most of these models are designed for those for whom design is no less important than functionality.

The total capacity of the main working chamber of the refrigerator. If there are separate zero chambers, compartments for wine and other additional functions, this paragraph takes into account only the volume of the refrigerating chamber itself, without additional equipment. In the smallest modern units, this figure does not even reach 100 liters, in the largest it can exceed 400 liters.

The choice of capacity depends on the actual storage needs of the products. At the same time, both the volume of stocks and the frequency of their replenishment (every day, once a week, etc.) matter. The chamber should not be stocked completely; this adversely affects the quality of the refrigerator. On the other hand, it is worth remembering that large volumes accordingly affect the dimensions and price of the unit.

In general, for one or two people, a capacity of 200 – 250 liters, or even less, is considered quite sufficient. The optimal capacity for a family of three is about 250 – 300 liters, for four to five people — 300 – 350 liters, and larger volumes are really needed mainly for specific situations when food has to be stored in large quantities and for a long time.

The number of shelves supplied with the refrigerator. In this case, only shelves placed inside the main (refrigeration) chamber are taken into account. And closed drawers, which are usually at the bottom, are not considered shelves.

In general, this amount depends on the volume: the more spacious the refrigeration compartment, the more shelves are usually provided in the kit. At the same time, there is no strict dependence here, and refrigerators of similar capacity can be equipped with a different number of shelves. As for specific options, the most modest models come with 1 – 2 shelves, 3 shelves and 4 shelves can be called an average, and more are found in some units.

In most modern refrigerators the shelves are removable. In addition, they can be installed at different levels. In this case, it is not necessary to use the entire set: for example, if it is planned to place tall objects inside, one of the shelves can be removed, creating a vast space. And vice versa: if necessary, you can, usually, buy additional shelves. So the number of shelves in the kit only allows you to evaluate the overall possibilities for organizing space in the refrigerator. How to use these features depends on the user.

Cold water supply system built into the refrigerator. The specific functionality of the dispenser varies: water can come from a built-in container or from a water supply to which the unit is connected; the design often includes filters of one type or another; different models may differ in performance and cooling speed, etc. However, in any case, this function has its advantages. In particular, pouring water from a dispenser is much more convenient than cooling it in bottles or other containers.

In the vast majority of refrigerator designs, the dispenser is placed externally - on the outside of the door. To get cold water, there is no need to open the main compartment again - this minimizes heat loss and helps save energy. However, there are also models with an internal dispenser, for which a place is carved out in the refrigerating chamber of the unit.