Comparison Bugaboo Donkey 5 Twin 2 in 1 vs Cybex Gazelle S

General design of the stroller.

In addition to traditional varieties — classic models (with a carrycot) and pushchairs (with a seat) — nowadays you can also find universal strollers, which are 2 in 1 and 3 in 1, transformers and strollers for sports purposes. Here is a more detailed description of each variety:

— Pushchairs. Pushchairs designed for the sitting position of the kid. The seat for the baby in such pushchairs is called a seat unit; in fact, it is a seat of a special design. In some models, this seat can tilt almost horizontally, which gives the little passenger the opportunity to take a nap. Nevertheless, all pushchairs are intended for more or less grown-up kids who are able to sit up independently — that is, not younger than 6 — 8 months.
Also note that in this category there are the possibility of installing a carrycot. In fact, such models are universal (see below); but if the carrycot is not initially included in the delivery, it is customary to classify the stroller as a pushchair.

— Jogging. A type of pushchairs (see above) designed for parents who value an active lifestyle: a jogging pushchair can be used not only when walking quietly, but also when jogging. Such pushchairs are usually...equipped with three wheels of rather large diameter, and also have a large width of the chassis (see below); all this gives additional stability and passability, including on uneven roads. In addition, the design may include specific features for added comfort and safety, such as a strap that fixes the parent's hand on the pushchair handle or an additional brake that activates when the pushchair is released from the hands.

— Universal. Strollers often come with at least two (or even three) interchangeable units: a lying carrycot for infants, a seat unit for older babies, and sometimes a Group 0+ car seat. Parents can choose which unit to use on the chassis. This option provides convenience throughout the baby's stroller years, starting with the carrycot for the first 6-8 months and transitioning to the seat unit. However, these universal strollers are pricier and less space-efficient than transformers with similar capabilities. On the flip side, separate carrycots and seat units are more convenient and reliable.
It is worth taking into account that some universal models can be supplied in alternative options — for example, " carrycot + car seat". So, when buying such a stroller, it does not hurt to specify the set of accessories supplied with it.

— Stroller-transformer. Transforming strollers allow the seat to convert seamlessly from a carrycot to a seat unit and vice versa, offering the same versatility as universal models. Unlike universal strollers, transformers don't require rearranging the main unit for this reconfiguration, providing several advantages. Firstly, the main block's format can be changed anytime, even on the go, without the need for separate seat units or carrycots. Secondly, the integrated carrycot takes up less storage space compared to two separate units.

— Classic. Strollers that are equipped with carrycots only; some also allow the installation of a seat unit, as in universal models, but if such a unit is not included in the kit, the stroller is considered a classic. Recall that carrycots are intended mainly for children under 6 – 8 months old, who are not yet able to sit normally in the seat unit; in other words, this type of stroller is suitable mainly for the smallest kids. That is why the "classic" nowadays is not particularly popular.

The type of stroller is indicated by the number of seats in it.

— Single. The traditional, most popular option is a stroller for one kid. Some of these models allow the installation of an additional second seat unit (see below), which turns them into doubles; however, by default, even in such a stroller there is only one place.

— For twins. Strollers with two seats in which you can seat twins (or just two kids of the same age and physique). Seats in such strollers can be located either side by side or one behind the other, in the latter case they can be installed at different heights.

— For triplets. Strollers with three seats — for triplets or three kids of the same age. It is very rare to have triplets at once, so there are few strollers of this type. The seats for the kids in them are usually arranged as follows: two side by side and one separately, in front of or behind them.

The ability to adjust the tilt between the seat and the backrest of the stroller. This helps to find the most comfortable position for the baby and adjust the seat to different situations: for example, at the end of a long walk, the backrest can be tilted back for a tired baby to take a nap.

The ability to adjust the tilt of the main unit relative to the stroller frame. This allows you to adjust the stroller to different situations: for example, at the beginning of the walk, the unit can be installed almost vertically, based on a sitting position, and later tilted back so that the baby can take a nap.

The ability to adjust the position of the footrest, on which the legs of the baby in the stroller rest.

A similar ability is found in some strollers, transformers and strollers of universal strollers (see "Design"). The footrest itself is an inclined surface attached to the front edge of the seat. Adjustable footrests are those in which the angle of inclination can be adjusted; in many models, this footrest can even be set horizontally. This makes it possible to choose the most comfortable position for the baby's legs in different situations.

A window made of transparent or translucent material, built into the hood that covers the cradle or seating unit. In the version with a walking block, the viewing window is usually located so that the parent can see the baby directly while moving, without being distracted from controlling the stroller. In cradles, the parent can see the child through a window by approaching the stroller from the side of the hood (that is, on the opposite side of the handle); implementations with a window in the front hemisphere of the hood are less common. In addition, a baby lying in a cradle can usually see the outside world through the window (primarily the sky above the stroller). The viewing window can be made in the form of oilcloth or a mesh mosquito net, through the holes of which air freely penetrates, but insects and small debris raised by the wind are retained.

The depreciation theme is designed to absorb shocks and bumps from uneven road surfaces. The most popular nowadays are models with spring systems; you can also meet the shock absorption of the articulated and double types, and in quite a large number of strollers this function is absent at all. Here are the main features of each option:

— Spring type. Depreciation systems based on classical springs mounted on individual wheels. They are used in all types of strollers except classic strollers (see "Design"). The simplest models use a single set of springs, while more advanced models may include additional comfort features such as SAS shock/vibration absorption technology. Whatever the case, depreciation systems of this type are simple yet practical, efficient and reliable.

— Articulated type. The type of depreciation used in strollers with carrycots - classic, universal, transformers. The frame, on which the carrycot or seat unit is installed, in such models is attached to the base of the stroller with the help of special bridges, which play the role of depreciation. As bridges can be used belt hinges, such systems can also refer to the articulated. Anyway, this type of depreciation is excellent for carrycots. First of all, the stroller is as smooth and soft as possible, which contributes to the comfort and deep sleep of the child (and the parent to drive...the stroller is much easier, especially on uneven surfaces). Secondly, the carrycot on such a stroller can be rocked back and forth, lulling the baby. On the other hand, such systems are poorly suited for stroller frames with swivel front wheels; and the failure of one absorber leads to tilting of the carrycot.

— Double. This term most often refers to the spring systems described above with additional shock absorbers on the frame of the stroller. Such systems help to maximize vibration reduction and can approach articulated systems in terms of efficiency (see above). On the other hand, the softness of the suspension can be inconvenient when overcoming curbs and other bumps: to raise the front wheels of the stroller, you have to press hard on the handle.

— Is absent. Strollers without depreciation are not suitable for uneven surfaces: in such conditions, the stroller will be shaken violently, which creates both discomfort for the baby and inconvenience for the parent. On the other hand, such models have advantages over strollers with depreciation. First, due to the lack of unnecessary parts, they are much cheaper, and the design itself is as simple as possible and at the same time reliable. Secondly, without depreciation, it is easier to overcome curbs and other obstacles: to raise the front wheels, it is enough to push a small pressure on the handle. Thirdly, such strollers rock less on smooth, wave-like uneven surfaces.

A feature found on models with swivel wheels (see above). Locking allows you to fix such wheels straight, without the possibility of turning to the sides; in some situations — for example, when driving over difficult terrain — locked wheels are more convenient than swivel wheels. And when manoeuvrability is required, the locks can be easily released.

Strollers in which the rear wheels are mounted on completely separate stands, without any additional bridge between them.

The main advantage of rear wheels without an axle is that the legs of the parent following the stroller do not touch the bridge between the wheels. In addition, this feature slightly increases the mobility (allows the stroller to pass between the wheels lying on the road objects, without clinging to them with the axle).