Comparison Karcher WD 3 vs Karcher MV 3

General type of vacuum cleaner.

The general features of the design and use of the unit depend on this parameter. In addition to conventional models, vacuum cleaners of the following types are also produced nowadays: robot vacuum cleaners, upright(regular and upright with handheld), workshop, handheld models for household(including for bed and for car) and handheld industrial, full-size industrial (construction), backsack and vacuum cleaners for fireplaces. Here is a more detailed description of each variety:

— Conventional. Traditional household vacuum cleaners are designed for cleaning apartments, residential buildings, small offices, etc. Such a unit consists of a relatively small body on wheels (for ease of movement on the floor) and a tube with a brush connected to the body with a flexible hose. It is this option that you should pay attention to if you need a “regular home vacuum cleaner” that is not designed to perform any specific tasks.

— Robot. Vacuum cleaners that work completely autonomously, without the need to co...ntrol the device. The role of the user is limited only to auxiliary tasks (unloading the collected garbage, programming the work, etc.). The robot vacuum cleaner usually has the appearance of a flat disc. Low height allows it to pass under furniture and other interior items. And specific job features may be different. So, the simplest models move along random trajectories within the room, bypassing small obstacles and turning around when they reach walls or other large obstacles. In more advanced devices, it may be possible to set the map and/or cleaning schedule, access the unit via the Internet, etc. (See "Additional operating modes", "Robot features"). However, note that robots do not provide power and capacity. So it is hardly worth choosing such a device if you need high cleaning efficiency or a large cleaning area is expected. On the other hand, such a device is perfect for maintaining the already cleanliness in apartments, private houses and other similar conditions: a robot vacuum cleaner can be run at least every day without much difficulty.

— Upright. Vacuum cleaners of this type have a specific layout: the motor, dust collector and brush are fixed on a common vertical tube, while the hose is usually completely absent in the design. Such units are designed primarily for domestic use; they are not very convenient when cleaning hard-to-reach places (like the space under sofas or beds), but they do a good job with vast open spaces. Thus, upright vacuum cleaners are quite popular, in particular in large offices and private homes. And some of these units are equipped with bendable tube (see "Tube type"), which simplifies cleaning in the hard-to-reach places mentioned above.

— Handheld (household). Handheld vacuum cleaners for domestic use are light in weight, compact and have a one-piece layout: the motor, dust collector and suction nozzle (which can be worn with a brush) are combined in one body. Such units do not differ in power, but they are extremely mobile. In addition, most often they use batteries as a source of energy which gives even greater freedom of movement. One of the most popular ways to use handheld household vacuum cleaners is to clean the interior of a car. For this, some models can be equipped with a car cigarette lighter connection (both as an additional option and as the only source of energy). As for domestic use, such units are not suitable for full-fledged cleaning in an apartment/house/office. However, they cope well with auxiliary, specific tasks: cleaning furniture and various small surfaces, collecting small debris in hard-to-reach places, etc.

— Handheld (for bed). A variety of hand-held vacuum cleaners designed for cleaning beds, upholstered furniture, mattresses, pillows, etc. The main feature of such units is advanced disinfection and pest control, especially dust mites. So, an almost obligatory element of equipping bed vacuum cleaners is a UV lamp (see below), and their suction systems and operating format are designed to effectively draw in dust mites — even “burrowed” to a considerable depth. If necessary, devices of this type can be used for more traditional cleaning, but their main purpose is to clean furniture and bedding.

— Handheld (industrial). A type of industrial vacuum cleaner that does not have wheels and is designed to be carried from place to place in the hands. It is worth saying that for the most part, such units bear little resemblance to handheld household models (see above) — they rather resemble conventional vacuum cleaners with a hose, devoid of wheels and designed for transportation in hands or on a shoulder strap (although there are exceptions). Power is usually supplied from a battery; in some models, the possibility of working from the mains may also be provided. As a result, vacuum cleaners of this type are noticeably inferior in power to classic industrial models (also see above). On the other hand, they are more mobile — also due to independence from sockets — and at the same time, they are quite capable of coping with coarse construction waste.

— Upright with handheld. Models that combine the capabilities of upright and handheld household vacuum cleaners (see above). The traditional design of such a vacuum cleaner is a handheld unit with a motor, a dust collector and a nozzle, complemented by either a removable vertical bar or an extension tube. This design allows you to choose the format of work at your discretion and use one vacuum cleaner for general cleaning (in an upright format) and small specific tasks (in a handheld form). The main disadvantage of this option can be called a lower capacity than upright and conventional household vacuum cleaners — this somewhat complicates the use of large-scale cleaning. However, due to the versatility of the devices in this category, they are much more popular than purely upright units.

— For workshop. Vacuum cleaners designed for professional cleaning in large volumes. Such units are popular in cleaning companies but can also be useful for private use. Typical examples of the use of business models are cleaning a home workshop or garage, hotel rooms, etc. In terms of layout, this type of vacuum cleaner resembles conventional models — a body with a tube on a hose — but they have several differences. The most noticeable of these are a large size and vertical layout of the hull with an overhead engine. In addition, workshop models are distinguished by high power and capacity (from 6 litres or more). They may provide wet cleaning, although most models only work in the traditional dry format (see "Cleaning type").

— Industrial (construction). Vacuum cleaners designed for cleaning industrial facilities — construction sites, factory floors, etc. In many ways, they are similar to the workshop ones described above: most models have an elongated body with a top-mounted engine, high power and large capacity. The main difference is that industrial units are designed for coarse construction waste, which more “delicate” types of vacuum cleaners cannot handle. And to collect such garbage in such units, containers are used in the form of rigid containers. Such containers may be supplemented with paper bags for ease of unloading, but this is not strictly required. In industrial vacuum cleaners, the water collection function is very popular (see below), although they are never made for washing and most often do not even provide wet cleaning. In addition, only bags are used as dust collectors; aquafilters and cyclones do not occur in such units.
Note that this category includes only industrial vacuum cleaners of the classic layout, moved on wheels. Hand and backpack models are placed in separate categories (see below).

— Backpack. Vacuum cleaners carried behind the back in the manner of a backpack — hence the name. This design combines the advantages of classic and handheld format vacuum cleaners: the unit can be made quite powerful, roomy and at the same time mobile. However, most models of this type are mains powered, and battery solutions are less common. Nevertheless, even when powered from the outlet, you can achieve good freedom of movement. It makes backpack vacuums well-suited for situations where performance and mobility are needed at the same time. The main disadvantage of this type is the rather high cost due to some design features.

— For fireplaces. Specialized vacuum cleaners designed to collect coals and ash in fireplaces, stoves, barbecues, charcoal grills, etc. One of the key features of this type of unit is resistance to high temperatures, which allows you to collect coals and ashes that have not cooled down to the end. To do this, the hoses and brushes of fireplace vacuum cleaners are made of non-flammable refractory polymers, and a metal container is usually used as the main container. In addition, filters in such models have increased efficiency and resistance to fine dust. For added convenience, a self-cleaning filter can also be provided (see below). Note that vacuum cleaners of this type are mostly quite expensive. Therefore, it makes sense to buy such equipment only in cases where you often have to deal with cleaning fireplaces — for example, if a fireplace is installed in a restaurant or hotel lobby and is used every day.

The suction power provided by the vacuum cleaner. For models with power adjustment (see below), in this case, the maximum value is taken into account. Note that "suction power" is sometimes erroneously also called the suction force, indicated in pascals; see below for more details.

Suction power is a key indicator that determines the capabilities of the unit: the higher it is, the more efficiently the vacuum cleaner can draw in various contaminants, and the better it handles with carpets, fabrics and other materials into which dust can penetrate deeply. On the other hand, high power inevitably affects the weight, power consumption, dimensions and price of the device. Therefore, it does not always make sense to chase the maximum values — you need to take into account the real working conditions and the general purpose of the vacuum cleaner.

The specific numbers found in this paragraph largely depend on the type of device. For example, in handheld household models, suction power does not exceed 100 W, and for conventional household units, an indicator of 100 – 150 W is still considered very limited. At the same time, we note that the minimum required for a full-fledged dry cleaning of smooth floors is considered to be 300 – 350 W, for carpet and other short pile coatings — 350 – 400 W, and for long pile materials and upholstered furniture higher rates are desirable. Vacuum cleaners with lower suction power values are intended not so much for periodic cleaning, but for constant (ideally daily) maintenance of cleanliness in an already tidy room.

As for the relationship between suction power and suction force, it is as follows: power is the suction force (thrust) multiplied by the airflow (performance). Without going into too much detail, we can say that the efficiency of the vacuum cleaner is determined by both of these indicators. And it is worth evaluating this efficiency by suction power (regardless of the specific relationship between traction and performance).

Ability of operation of the vacuum cleaner in the air blowing mode.

As the name suggests, it is the opposite of the standard suction mode. The air is not drawn into the hose but is forced out of it. This function significantly expands the functionality of the vacuum cleaner. In particular, it allows you to use the unit as a leaf blower for cleaning fallen leaves from the porch or paths in the yard, or for sweeping large debris into one pile. At the same time, blowing is especially useful where suction cannot be applied — like on paths covered with rubble. In addition, this mode can be useful for cleaning some hard-to-reach places — for example, radiators and other slots in the “hardware” of a computer: for several reasons, blowing out such places often turns out to be more effective than drawing in dirt.

Usually, to use this mode, it is enough to rearrange the hose from the main working port to the "purge" one.

Models of replacement bags and/or other containers for waste (see "Dust collector") with which the vacuum cleaner is compatible.

This moment does not affect the functionality of the vacuum cleaner itself. However, knowing the model of the dust collector makes it much easier to find a spare or replacement dust collector. At the same time, we note that compatible models of such containers may differ markedly in specifications from the ones in the box. For example, many fabric bag vacuum cleaners also accept disposable paper bags; and some units are initially equipped with a dust collector of one type. However, if desired, they allow you to buy and install a dust collector of another type (for example, replace the bag with an aquafilter).

The noise level produced by the vacuum cleaner during operation. Usually, the value for normal operation at maximum engine power is indicated here. With less power, the loudness of the unit may be lower, but the key is precisely the maximum indicator.

Regarding specific numbers, keep in mind that the decibel used to measure the noise level is a non-linear quantity. Therefore, it is worth evaluating specific indicators using special comparative tables. In general, vacuum cleaners are quite noisy appliances; so in this case, models are considered quiet if this indicator does not exceed 65 dB — this is the level of a loud conversation between 2 – 3 people at a distance of 1 m. The quietest of these models give out only 40 dB — this is the average volume of a person’s speech in normal tones (and the minimum volume allowed for constant noise sources in living quarters during the day). For louder units, the comparison table looks like this:

— 66 – 70 dB — loud conversations between several groups of people at a distance of about 1 m;
— 71 – 75 dB — the volume of a cry or laughter in full voice at a distance of about 1 m;
— 76 – 80 dB — the volume of a mechanical alarm clock or the engine of an old truck;
— more than 80 dB — a very high noise level, exceeding the level of a loud scr...eam; when working with a vacuum cleaner having such specifications for a long time, it is highly desirable to use hearing protection.

Also note that the noise level largely depends on the engine power, as well as some other features (for example, it is strongly affected by the presence of an aquafilter — see "Dust collector"). At the same time, there is no hard connection here, and units with a similar set of specifications can differ markedly in actual loudness. In such cases, when choosing here, it is worth proceeding from the fact that a quieter vacuum cleaner will be more comfortable to use. However, it will most likely cost noticeably more.

The presence in the vacuum cleaner of a special device for storing nozzles and sometimes other accessories.

Such a device can be either a compartment in the case or a set of external fasteners; the latter, in particular, is quite common in industrial vacuum cleaners (see "Type"). Anyway, the attachment compartment makes it much easier to store and transport various accessories: they are not scattered or lost, and you do not need to look for a separate package for them. However, such a compartment is often not intended for all nozzles and accessories but only for the smallest ones. However, even in such cases, it makes life much easier for the user. The disadvantages of such equipment include the fact that it inevitably affects the dimensions of the case. However, in full-size vacuum cleaners — conventional, industrial, for workshop (see "Type") — this disadvantage is often not important.

System of automatic winding of a power cord. Usually, it is a special spool built into the body of the vacuum cleaner. To unwind a wire from such a spool, just pull it, and to rewind it, you need to press the button — and the built-in spring will twist the coil in the opposite direction, winding the cable around it.

The main advantage of the cord rewind system is obvious: it allows you to easily and quickly roll up the cable for storage and transport. In addition, in many vacuum cleaners with this function, the wire can be partially unwound, choosing its optimal length depending on the situation. The disadvantages of automatic cord rewind include some bulkiness and poor suitability for portable units. Such equipment nowadays can only be found among "full-size" vacuum cleaners — conventional (see "Type"), workshop and industrial.