Comparison XP-PEN Deco MW vs XP-PEN Deco 01V2

The exact size of the active area of a tablet (or screen in a graphic display) in width and height. In general, it is more of a reference than a practically significant parameter: when choosing a traditional graphics tablet, there is often enough information about the format (see above), and for displays, primarily the diagonal (see above) and aspect ratio (see below) are of practical importance . However, the exact dimensions can also be useful in fact: for example, you can determine the aspect ratio from them (for classic tablets, this parameter is often not indicated).

Regular way to connect a tablet to a computer.

— Wired. Wired connection, usually via a USB port. This method is not very convenient: the wire limits the maximum distance from the tablet to the PC, and sometimes it has to be pulled to hard-to-reach places (for example, if the system unit is installed under the table with ports to the wall, and there are no available connectors on the front panel). On the other hand, in most cases, these inconveniences are not critical, and the wired tablets themselves are not as expensive as wireless ones, and besides, they do not require their own power supply.

— Wireless. Wireless connection can be carried out in two main ways — either via technology or via a dedicated radio channel. The first option is convenient because the tablet can be connected to any computer with Bluetooth — for example, a laptop or monoblock — without the use of special adapters; however, if there is no Bluetooth module in the computer, you will still need an adapter, and you will have to buy it separately. Models connected via radio, by definition, are equipped with an adapter and work only through it. Anyway, wireless tablets are more convenient than wired ones: the communication range usually reaches several metres, which allows you to freely move away from the comp...uter (for example, draw in your favorite chair, holding the tablet on your lap). On the other hand, these devices are significantly more expensive, require their own power supplies, and have limited battery life.

— Wired/wireless. Models that support both of the connection options described above. Thus, they combine the advantages and partly compensate for the shortcomings of wired and wireless models. So, when the user is sitting right at the computer, the tablet can be connected with a wire and save battery power, and if freedom of movement is needed, the device can be disconnected and use a wireless connection. However, these models are not cheap.

Direct wireless communication technology between various devices. In the context of graphics tablets, Bluetooth serves both to pair with a computer and to connect auxiliary peripherals (which is much less common). Bluetooth wireless protocols from revision 4 and newer are current today. Here are their key features:

— Bluetooth v 4.0. The fourth edition debuted the Bluetooth Low Energy (LE) data transmission format, which allows for significant energy savings in wireless communications.

— Bluetooth v 4.1. One of the improvements in version 4.1 was the optimization of collaboration with 4G LTE communication modules - so that Bluetooth and LTE do not interfere with each other. Also in this version it became possible to simultaneously use a Bluetooth device in several roles.

- Bluetooth v 4.2. There were no fundamental updates in version 4.2, but in general the technology received a number of improvements in terms of reliability and noise immunity of the connection.

— Bluetooth v 5.0. Version introduced in 2016. The Bluetooth Low Energy (LE) protocol makes it possible to double the data transfer rate (up to 2 Mbit/s) at the cost of reducing the range, and also quadruple the range at the cost of reducing the speed. Among other things, there are a number of improvements aimed at organizing simultaneous work with a large number of connected devices.

— Bluetooth v 5.1. In addition to general improvements in communication qua...lity and reliability, this update introduced the ability to determine the direction from which a Bluetooth signal is coming (with an accuracy literally down to the centimeter).

— Bluetooth v 5.2. The main innovations in this version are a number of security improvements, additional optimization of power consumption in LE mode and a new audio signal format for synchronizing parallel playback on multiple devices.

— Bluetooth v 5.3. Among the innovations in version 5.3, we accelerated the process of negotiating a communication channel between the controller and the device, implemented the function of quickly switching between the operating state in a low duty cycle and a high-speed mode, and improved the throughput and stability of the connection by reducing susceptibility to interference.

- Bluetooth v 5.4. In version 5.4, the range and data exchange speed were increased, and the energy-saving Bluetooth Low Energy (LE) mode was improved. This version of the protocol also uses new security features to protect data from unauthorized access, has increased connection reliability by selecting the best channel for communication, and prevents loss of connections due to interference.

The model of the pen that comes with the device. Allows you to understand which one is used and learn more fully its full characteristics. In this case, in the case of a replacement, you will already be aware of which accessory is needed for the purchase. However, nothing prevents you from replacing the existing one with a more advanced one, of course, if the graphics tablet itself allows you to work with a different pen model.

The maximum angle of the pen (relative to vertical) at which the tablet continues to perceive it as a working tool and respond to its movements. The larger this angle, the greater the allowable deviation of the pen from the perpendicular position and the higher the degree of freedom when working with the tablet.

A characteristic of a graphics tablet that determines how many times per second the tablet records the artist’s actions. The response rate is expressed in PPS (Points Per Second).

The higher the PPS value, the more responsive the surface is. If responsiveness is low, there is a possibility of getting jagged lines when working with the pen, and the stylus cursor may lag behind the movement of your hand. Devices with a response of 266 PPS or more perform best, the “golden mean” is the range of values 230 – 233 PPS and 250 – 260 PPS, and in entry-level models the response can be 220 PPS or less.

The number of control keys provided on the pen. These keys can be used for various purposes — for example, changing the type or size of the brush for painting, switching colours, turning on the eraser mode, etc. The more keys — the more options the artist can switch on the fly without getting into the settings of the graphic editor, and the more advanced, usually, this pen is.

- Mouse. Availability of a computer mouse included with the tablet. Note that such an accessory can be useful even if you already have a mouse: tablet mice are usually specialized models that are distinguished by high accuracy and/or advanced functionality and are well suited for working with graphics. However, it wouldn’t hurt to clarify the specific capabilities of the mouse separately.

— Replaceable pen nibs. The use of such accessories is connected with two points. Firstly, the stylus tip is usually made quite soft so that when working with the tablet, it is the pen that is erased, not the touch surface. Secondly, specialized tips are produced for styluses that allow you to simulate the sensations of using various artistic tools - felt-tip pens, brushes, etc. Accordingly, the delivery package may include both spare tips of the same standard type and tips of different designs; This point should be clarified separately. However, in any case, such a set will be useful for those who draw often and a lot.

— Pen holder. In accordance with the name, this device is used to secure the pen during non-working hours - so that the stylus does not get lost and is always in a clearly defined place. Note that the holder can be made either as a part on the tablet body (for example, a hinge), or as a separate device that can be mounted in a convenient place on the tab...le. In addition, it can have seats not only for the pen, but also for replaceable nibs for it, if they are provided in the kit (see above).

- Glove. The kit includes a special glove made of lycra or other similar material. The glove reduces friction between the hand and the active area of the graphics tablet, providing a smooth glide while working and helping to avoid hand marks. As a rule, such “clothes” are designed for two fingers (little finger and ring finger). And the fingers that hold the pen for drawing remain free.

- USB receiver. A device found in models with wireless or combined connections. Such a receiver is connected to the USB port of a computer or laptop, and communication via a radio channel is carried out through it. However, this accessory can also be found in Bluetooth models - in them it plays the role of an adapter for equipment that is not equipped with its own Bluetooth modules.

Power supply methods provided for in the device design.

Many graphics tablets can receive the necessary power via a USB port - directly from a computer or laptop. This option is often combined with standard mains power from a regular household outlet or autonomous operation of the device from a built-in rechargeable battery. All described power methods can be implemented separately in graphics tablets. Well, the least common options are powered by “finger” or “little finger” batteries (AA and AAA formats, respectively).