Zalman S3 TG black
 | Expecting restock $113.98 If you need a relatively inexpensive Mid Tower case with good capacity and a competent chassis design, then this platform can meet your expectations. The case is suitable for installing an ATX motherboard. The place of the main side panel is occupied by a translucent acrylic glass panel. The model has a lower casing with seats for the power supply and memory drives. The hard drive cage is equipped with removable slides (two pieces) for 3.5″ HDD devices. Additionally, behind the motherboard there are two areas for fixing a 2.5″ SSD. The Zalman S3 TG computer case is equipped with a blank front cover with a decorative surface that imitates polished metal. The front air duct is represented by narrow ventilation channels on the sides of the facade. The case comes with one pre-installed 120mm f...an, which is mounted on the rear. At the front there are three seats for 120mm turntables. The top cover has a large ventilation channel covered with an anti-dust mesh. On the setup unit you can find: power and reset buttons, two USB 2.0 ports, 1 USB 3.0 port, 3.5 mm audio jacks for headphones and microphone, LED indicators. |
 |
If you need a relatively inexpensive Mid Tower case with good capacity and a competent chassis design, then this platform can meet your expectations. The case is suitable for installing an ATX motherboard. The place of the main side panel is occupied by a translucent acrylic glass panel. The model has a lower casing with seats for the power supply and memory drives. The hard drive cage is equipped with removable slides (two pieces) for 3.5″ HDD devices.
Additionally, behind the motherboard there are two areas for fixing a 2.5″ SSD. The Zalman S3 TG computer case is equipped with a blank front cover with a decorative surface that imitates polished metal. The front air duct is represented by narrow ventilation channels on the sides of the facade. The case comes with one pre-installed 120mm fan, which is mounted on the rear. At the front there are three seats for 120mm turntables. The top cover has a large ventilation channel covered with an anti-dust mesh. On the setup unit you can find: power and reset buttons, two USB 2.0 ports, 1 USB 3.0 port, 3.5 mm audio jacks for headphones and microphone, LED indicators.
