Drive Cases & Docks

Take your CalDigit VR mini on the go with confidence using the VR Mini Hard Carrying Case, meticulously crafted to offer a custom fit for your device and its essential components. This durable case is constructed with a rugged hard shell exterior, ensuring superior protection against impacts, drops, and the rigors of travel. The protective nature of the case is enhanced by its snug interior, which cradles your CalDigit VR mini, adapter, and USB components, safeguarding them from scratches and jostles.The stylish design of the case is not only about aesthetics but also about functionality. Its convenient structure boasts dedicated compartments for all your different interface cables, including …

Become empowered with the Replacement AC Adapter for VR Mini 1 and 2 Storage Devices. This essential accessory is specifically designed to be fully compatible with both VR Mini 1 and VR Mini 2 devices, ensuring seamless operation and optimal performance. With an 18-watt OEM power supply, this AC adapter provides reliable and consistent power to your VR Mini storage devices, ensuring they function at their best. Whether you're replacing a lost adapter or simply want a spare for travel or office use, this AC adapter is a perfect fit. It's not just an adapter, it's a key to unlock the full potential of your VR Mini 1 and 2 storage devices. Experience uninterrupted data access and smooth device

Are you seeking a high-performance RAID solution to enhance your creative workflows, secure your project archives, and ensure reliable system backups? Look no further than the Mercury Elite Pro Dual Bay Performance RAID Enclosure, featuring cutting-edge Thunderbolt 2 technology. This advanced enclosure is designed to house two 3.5" hard drives, offering a variety of configuration options including RAID 0, 1, SPAN, and Independent Drive Modes to suit your specific needs.Maximize your productivity with the Mercury Elite Pro Dual's RAID 0 configuration, which delivers astonishing data transfer speeds up to 474MB/s, providing the bandwidth necessary to support compressed 4K video workflows and

Newly revised front door with Air In-Take feature Transfer rate up to 10Gbps via USB 3.1 Gen 2 Type C (USB-C to USB-C Cable with E-Mark IC included) Support all brand of 2.5" and 3.5" SATA I / II / III hard disk drive up to 16TB per drive, and up to 4 x 16TB. Support S.M.A.R.T / UASP / Smart Fan with built-in temperature (Auto or Manual Mode) Power Sync Feature: Power On / Off in synchronization with computer (Does not support auto power on due to power failure.)

Constructed to fit 4 x SATA / SAS hard drives to 3 x 5.25-inch drive bays. Support all 2.5-inch and 3.5-inch hard drive or SSD with no capacity limitation Hot-Swappable and removeable tray for easy and quick installation Metal Construction for quick heat dissipation Security lock to keep the drives secure in the enclosure

URSA Cine records to the included Blackmagic Media Module 8TB, allowing you to capture over 4 hours of Blackmagic RAW in 12K or a massive 20 hours in 4K! Blackmagic Media Module is fast, rugged and includes a massive 8TB of storage.Record and transfer high resolution 12-bit Blackmagic RAW files with this high performance media for use with Blackmagic URSA Cine and Blackmagic Media Dock. You get a massive 8TB Media Module preinstalled, formatted and ready to record. That's enough for over 4 hours of stunning 12K!

Accelerate your post production workflow by mounting, network sharing and uploading to Blackmagic Cloud media from up to up to 3 Blackmagic Media Modules.Eliminate Media Offload TimeBlackmagic Media Dock accelerates your post production workflow by making it faster and simpler to start editing and color correction! Mount up to three Blackmagic Media Modules for high speed access to media from multiple URSA Cine cameras all at the same time!The four high speed 10G Ethernet ports allow up to four separate edit workstations to connect directly and it is extremely fast, even when a lot of users are connected at the same time. Plus, the USB-C connection supports Ethernet so you can transfer media …

Fits 4x M.2 NVMe SSDs of all lengths, 30mm (2230), 42mm (2242), 60mm (2260), 80mm (2280), and 110mm (22110) Installs into any standard external 5.25' optical drive bay Supports Tri-mode controllers PCIe/NVMe pinout (Broadcom, Areca, and more) Connects with 4x OCulink (SFF-8612) (NVMe host required) Supports PCIe 4.0 specification with transfer rates up to 64Gb/s per drive bay Removable and tool-less drive installation design for easy drive maintenance 2-segment key lock for additional physical s

Icy Dock Mb705m2p-B Drive Enclosure For 2.5' - U.2 (Sff-8639) Host.

Supports 1x 2.5' SATA HDD/SSD or SATA M.2 SSD Does not support using the 2.5' and M.2 drive simultaneously Support transfer speeds up to 5Gbps via USB 3.2 Gen 1 Backward compatible with USB 2.0 interface Cool blue drive activity LED indicator light Large on/off drive power switch Anti-Slip rubber foot pad to ensure the adapter does not slip on the surface Included USB Type C to A cable

Supports 4x 2.5' SAS/SATA HDDs/SSDs (up to 9.5mm drive height) Install into any standard external 5.25' drive bay Supports SATA 6Gbp/s transfer speeds & SAS up to 12Gbp/s (SAS host required) Tray-less and door-less design for hot-swapping bare drives without tools or screws Reduce cable clutter by using a single 15-pin SATA power connection to power four drives

Supports 1x 2.5 U.2 NVMe PCIe 3.0/4.0 SSD (up to 15mm drive height) Uses 1x Slimline SAS (SFF-8654) connector, pin-out defined by SFF-9402 Rev 1.1 Fits in 1x external 3.5' drive bay Compliant with PCIe 3.0/4.0 up to 64Gbps transfer speeds Heavy-Duty full-metal chassis with industrial-grade ABS plastic

2.5' SAS/SATA Metal / Plastic

Super speed USB 3.1 Gen 2 and SATA 6G interface Supports 7mm or 9.5mm thick 2.5' SATA hard drives or SSD Supports UASP (USB Attached SCSI Protocol) for additional performance Integrated USB 3.1 Gen 2 Type-C cable for easy cable management Easy to use waterproofed connector Certified IP68 for dust proof and water resistance All aluminum design with smart cable integration Efficient heat conduction pad for reducing temperature

This RIITOP M.2 USB adapter can used as a portable flash drive or external hard drive for cloning or retrieving data, not cable needed M.2 form factor compatible with both SATA and PCIe NVME in sizes: 2230/2242/2260/2280 mm Note: NOT Compatible with M.2 PCIe AHCI SSDs

Support M.2 SSD with size of 2230/2242/2260/2280mm up to 2TB. NGFF M.2 SSD Enclosure 6Gbps. NGFF model with C to A cable (6Gbps). Material: Aluminum Alloy + Transparent PC Output Interface: USB3.1 Type-C Transfer Rate: 5Gbps Supported Capacity: 2TB Installation: Sliding Cover Supported Systems: Windows / Mac / Linux

Support M.2 SSD with size of 2230/2242/2260/2280mm up to 2TB. NGFF M.2 SSD Enclosure 6Gbps. NGFF model with C to A cable (6Gbps). Material: Aluminum Alloy + Transparent PC Output Interface: USB3.1 Type-C Transfer Rate: 5Gbps Supported Capacity: 2TB Installation: Sliding Cover Supported Systems: Windows / Mac / Linux

Support M.2 SSD with size of 2230/2242/2260/2280mm up to 2TB. NGFF M.2 SSD Enclosure 6Gbps. NGFF model with C to A cable (6Gbps). Material: Aluminum Alloy + Transparent PC Output Interface: USB3.1 Type-C Transfer Rate: 5Gbps Supported Capacity: 2TB Installation: Sliding Cover Supported Systems: Windows / Mac / Linux

Note: It doesnt support M.2 NVMe PCIe SSDs Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD Added protection for your SSD with enclosed housing

Note: It doesn't support M.2 PCIe NVMe or M.2 PCIe AHCI, Pls check your M.2 SSD type before place order. Added protection for your SSD with enclosed housing. Convert an m.2 NGFF solid-state drive into a Standard 2.5'' SATA III 6Gbps SSD. Compatible with M.2 NGFF SSD and SATA-enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5'' SATA Bays. Standard SATA 22pin connector. Support M.2 from factor: 22x42, 22x60, 22x80. System performance maximization. B & B+M Key compatible

2* M.2 SSD Drives Mounting Screws 2* Copper pillars

M.2 SSD Hard Drive Enclosure NVMe/SATA To USB 3.1 Solid State Drive Case 10Gbps/5Gbps Plug and Play for PC Computer(NVME)

M.2 SSD Hard Drive Enclosure NVMe/SATA To USB 3.1 Solid State Drive Case 10Gbps/5Gbps Plug and Play for PC Computer(SATA)

-Tool-free, sliding cover disassembly, quick installation of hard drives -Excellent cooling: Built-in Metal heat sink ensures perfect cooling performance of the solid state drive -WIDE COMPATIBILITY: Support M.2 SSD with size of 2230/2242/2260/2280mm up to 4TB -PLUG and PLAY: ORICO NVMe M.2 SSD Adapter SUPPORT Hot-swappable, Plug and Play, No Driver required