Staple Guns & Nailers

WORX Nitro 20V Cordless 18Ga Brad Nail Gun (Tool Only)

WORX Nitro 20V 18GA Narrow Crown Stapler-Tool Only

WORX Nitro 20V 16GA Brushless Finish Nail Gun

WORX Nitro 20V 16GA Brushless Finish Nail Gun - Tool Only

This Bostitch 21-degree plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. Depend on this 21-degree plastic collated framing nailer for efficiency.

The Senco's PC1195 mini pneumatic hand nailer drives bulk nails up to 3.5 inch in applications to tight to swing a hammer.

Power Grinder, Buffer & Sander Parts: Product Type: Flange; For Use With: Buffer, Power Grinder, Sander

M18 FUEL™ Duplex Nailer Kit: 12.5" High, 15.1" Long, 5.3" Wide

M18 FUEL™ Duplex Nailer Kit: 12.5" High, 15.1" Long, 5.3" Wide

M18 FUEL™ Coil Roofing Nailer (Bare Tool)

M18 FUEL™ 16 Gauge Straight Finish Nailer (Bare Tool)

M18 FUEL™ 16 Gauge Angled Finish Nailer Kit: 1-1/4" to 2-1/2" Nail Lengths

M18 FUEL™ 15 Gauge Finish Nailer Kit: 1-1/4" to 2-1/2" Nail Lengths

M18 FUEL™ 15 Gauge Finish Nailer (Bare Tool): 1-1/4" to 2-1/2" Nail Lengths

M12™ Cordless Palm Nailer (Bare Tool): 2700 BPM, 6D-16D Collet Capacity

The Milwaukee M18 FUEL Coil Roofing Nailer delivers cordless innovation to Roofing and Exterior Contractors through optimized performance, best-in-class runtime, and unmatched versatility. This solution is designed for small roofing jobs and repairs along with the added versatility of vinyl siding installation. By leveraging our nitrogen air spring technology, Powerstate Brushless motor, and Redlink Intelligence, this nailer delivers the performance to seat nails at firing rates of up to 6 nails per second. When paired with the M18 Redlithium High Output CP3.0 battery pack, this nailer sinks up to 1100 nails per charge, providing best-in-class runtime to maximize productivity. This tool features …

The Milwaukee M18 Fuel Coil Roofing Nailer delivers cordless innovation to Roofing and Exterior Contractors through optimized performance, best-in-class runtime, and unmatched versatility. This solution is designed for small roofing jobs and repairs along with the added versatility of vinyl siding installation. By leveraging our nitrogen air spring technology, PowerState Brushless motor, and RedLink Intelligence, this nailer delivers the performance to seat nails at firing rates of up to 6 nails per second. When paired with the M18 RedLithium High Output CP3.0 battery pack, this nailer sinks up to 1100 nails per charge, providing best-in-class runtime to maximize productivity. This tool features …

The Milwaukee Vinyl Siding Tip gives users the versatility to complete vinyl siding installation applications with the Roofing Nailer. This tip serves as a replacement for the tip included in each tool purchase. This accessory has 2 prongs that properly align the tool in the vinyl siding nailing slots, the tip creates an offset so that nails are driven to the appropriate depth leaving a gap between the nail head and the vinyl siding. The tip features magnetic interlocking features to allow for quick attachment and detachment, on tool storage for accessibility, and a durable steel design. This innovative accessory is only compatible with the M18 Fuel Coil Roofing Nailer (2909-20)

The Milwaukee M18 Fuel Coil Roofing Nailer Replacement Rubber Wear Pads serve as a replacement for the 6 rubber wear pads positioned throughout the tool. These rubber wear pads have a dual purpose of protecting the Roofing Nailer from the abrasive surface of asphalt roofing shingles as well as providing extra grip to prevent the tool from sliding off the roof on higher pitched roofs. These rubber wear pads can be secured in place by T15 / slotted screws for easy attachment and removal. This accessory is only compatible with the M18 Fuel Coil Roofing Nailer (2909-20)

The Milwaukee M12 FUEL 18 Gauge Compact Bad Nailer delivers peak productivity at the jobsite, providing users with unmatched nailing performance and access to tight spaces with the compact, lightweight, ergonomic design. Leveraging a nitrogen air spring mechanism, this brad nailer enables user to sink 5/8 in. to 1-1/2 in. brad nails to the proper depth in both hard and soft materials while leaving clean, consistent nail holes. Because of the compact design, the M12 FUEL 18 Gauge Compact Brad Nailer provides over 700 nail fires on a single battery charge. For an additional run time, the M12 FUEL 18 Gauge Compact Brad Nailer is fully compatible with all Milwaukee M12 Redlithium Batteries.

48" x 6" Belt Sanding Machine: Horizontal & Vertical

48" x 6" Belt Sanding Machine: Horizontal & Vertical

42" x 1" Belt Sanding Machine: Vertical

42" x 1" Belt Sanding Machine: