Electrical Wires & Cables

Handy box cover used to close a 4in x 2in. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Handy box cover used to close a 4in x 2in. handy box. It is also designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

Male Terminal Adapters are connectors used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end. Male Terminal Adapters can also be used to connect PVC conduit to a box or other threaded body with use of a lock nut. The fittings consist of one solvent weld female end and one threaded male end. Both ends will fit the same diameter conduit.

Cantex EZ20SNW EZ Box is a 20.3 cu. in. 1-gang electrical switch and outlet box for residential or light commercial electrical installations. It features knockouts and enhanced angled nails for easy installation.

Square blank cover is used with 4 in. square boxes to mount switches, receptacles, and devices. It is built with angled slots on the covers to compensate for up to 1/2 in. of box misalignment on upright framing members. It is made of zinc-plated steel for durability.

The Sigma ProConnex Conduit Nipples are used in conjunction with locknuts to provide a short raceway between two outlet boxes or metal enclosures.

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

A section of PVC Schedule 40 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run. Both ends of the bend are spigot (plain) end. Both ends are solvent weld. Can be used above ground or buried and are suitable for concrete encasement.

The Sigma ProConnex Squeeze Connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are equipped with a tri-combo screw and are suitable for aluminum or steel cable and conduit.

Switch box supports are used to secure a switch box in a hollow wall cavity of drywall or plaster. It can be used with any deep switch box that has ears. Available in two lengths, they provide options for both shallow and deep switch boxes.

Threaded closure plugs are used to seal off unused outlets. Plugs are for use with Weatherproof boxes. They are also for use with extension adapters and cluster covers.

Adapter used with the hub inside a box or enclosure. The cylinder protrudes through a hole in the box wall and is solvent welded to a female fitting outside the box or enclosure.

For connecting different sizes of PVC conduit, also for non-metallic schedule 40 conduit. Non-conductive, will not rust or corrode. Joins 3/4 in. PVC conduit to 1/2 in. PVC conduit.

The Sigma ProConnex Reducing Washers are used to decrease the size of a knockout in a steel outlet box or metal enclosure. Two of these zinc-plated steel reducing washers are required for each knockout. They are embossed for self-centering and easy installation.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

Square blank covers are used to hang commercial or industrial lighting fixtures, security cameras, motion detectors, occupancy sensors, and other electronic devices for overhead ceiling installations. This box cover is a great fit for commercial or industrial applications. Additionally, is ideal for locations where the pipe stem or fixture is not subjected to motion or vibration.

Cantex 5140106 is a 1-1/4 in. Male terminal adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end.

Utility box covers single receptacle steel 1-13/32 inch diameter steel box cover with single 1.406 inch receptacle opening in the center. Rugged construction. 2- 5/16 inch wide x 4- 3/16 inch tall. UL Listed.

The Sigma ProConnex Reducing Bushings are used to decrease the entry size of threaded conduit to join conduits of two different sizes. These reducing bushings are of zinc die-cast construction.

The Sigma ProConnex Squeeze Connectors are used to terminate AC, MC or FMC/RWFMC to a knockout in a dry location box or enclosure. These die-cast zinc connectors are equipped with a tri-combo screw and are suitable for aluminum or steel cable and conduit.

Cantex 5140045 is a 1 in. Schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

The Sigma ProConnex Rain-Tight EMT Compression Couplings are used to connect two lengths of steel EMT conduit. These die-cast zinc couplings are approved for concrete-tight and rain-tight applications.

A handy box cover is designed to attach devices in a surface-mount industrial or commercial setting. The captive cover screws provide a straightforward installation. Additionally, the zinc-plated steel provides durability for the long term.

A connector used to join lengths of conduit pipe. The fitting consist of two female ends with a center stop. Both pieces of pipe should seat at the stop for proper positioning.