Electrical Wires & Cables

GB's new work single gang switch/outlet boxes are constructed of PVC for greater performance with a lower installation cost. They are designed and listed for use with non-metallic sheathed cable and non-metallic raceway in accordance with Article 314 of the National Electric Code. The box features built-in cable clamps to hold wiring firmly in place.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The flanged spade terminal has similar features to the spade, but with turned up ends that stay secure even if the mount screw loosens. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

Cantex 5140048 is a 2 in. schedule 40 female adapter used to transition threaded metal or PVC conduit with one end threaded and the other end socket solvent weld.

The locking spade terminal has similar features to the spade, but with an interior notch that locks into place around the stud. Extra force is needed to remove from the stud, deterring accidental removal if the mount screw loosens. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc-plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high-dielectric …

The parallel splice connector allows for quick, easy wire insertion to splice wire during a continuous run. Wires insert from both ends and overlap, with a single crimp in the center. Resistant to melting and corrosion, high temperature terminals are ideal for high heat applications such as ovens, motors and light fixtures.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

Raco Covers are manufactured from durable pre-galvanized steel and are designed to house and protect electrical wiring, switches and receptacles. All steel covers are UL listed and acceptable for use in 2-hour fire rated walls and ceilings. Device mounting holes are pre tapped to accept device fasteners.

The locking spade terminal has similar features to the spade, but with an interior notch that locks into place around the stud. Extra force is needed to remove from the stud, deterring accidental removal if the mount screw loosens. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The 2 gang handy box cover is designed to cover and protect a variety of applications. These include electrical wiring, switches, and receptacles. Captive screws are conveniently included with this product. Additionally, this cover is UL listed for safety.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

The Sigma ProConnex EMT Compression Couplings are used to connect two lengths of steel EMT conduit. These zinc-plated steep couplings are suitable for indoor applications and approved for concrete-tight applications.

The Sigma ProConnex Rigid Threaded Nipples are used to extend the length of threaded Rigid conduit or IMC. These zinc-plated steel threaded nipples can also be used to connect two steel outlet boxes or metal enclosures together when used in conjunction with locknuts.

The Gardner Bender quick and always-reliable crimp-type wire terminals feature color-coded barrels denoting industry standard wire gauge sizes. Vinyl insulated barrels provide a high degree of protection and carry a maximum 600V rating. You will find various terminals for various circuit protection devices, all insulated to last for those any environments.

The Sigma ProConnex knockout seals are used to close exposed holes in an outlet box or metal enclosure. These knock-out seals are of zinc-plated steel construction.

The spade terminal permits a fast wire connection, since the spade can be easily slipped over a stud without completely removing the fastener. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.

The Sigma ProConnex Grounding Clamps are used to connect bare or insulated copper wire to copper or galvanized steel water pipe.

Sigma's weatherproof one-gang blank covers are used to protect junction boxes or boxes not in use. Stamped steel blank covers are powder coated for maximum corrosion resistance and compliment one-gang weatherproof boxes installed in wet, damp or dry locations. Cover includes hardware and gasket.

The ring tongue is a traditional style terminal with the safest and most fail-safe connection since it cannot be removed without first taking off the mounting screw. Uninsulated terminals are the most cost-effective type of terminal and are ideal for use when specialized features are not required.

WireGard twist-on wire connectors are designed for general purpose applications requiring the connection of 2 or more copper wires. WireGard connectors feature a straight type Polypropylene shell with side knurling for an easy grip. The inner spring is zinc plated to resist corrosion and has a tight square profile to make quick secure contact with wires and ensure connections with positive continuity. These all purpose connectors require fewer turns to meet required torque and meet or exceed UL pull out and dielectric test requirements. The tough thermoplastic shell shields against environmental extremes and resists chemical action from hydrocarbons, diluted acid or alkaline solutions. The high …

The locking spade terminal has similar features to the spade, but with an interior notch that locks into place around the stud. Extra force is needed to remove from the stud, deterring accidental removal if the mount screw loosens. Insulated terminals are used when an insulated barrel is required and feature color-coding that signifies the correct wire gauge size.