Engine Oils

Made in United States

Provides exceptional protection from piston deposits, oil thickening and valve train wear while minimizing engine sludge formulation
Engineered to provide exceptional performance in engines operating under severe service conditions including towing and hauling under high temperatures
Special viscosity improvers, anti-wear, anti-oxidant and detergent additives protect and maintain cleanliness in hot running, heavy diesel and heavy duty gasoline engines
Applicable for on and off road heavy duty 4-stroke trucks, gasoline and diesel light trucks and passenger cars where API CK-4, CJ-4, CI-4, CH-4, CG-4, CF-4, CF, SN are recommended

Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
Provides maximum protection against viscosity and thermal breakdown
Delivers superior engine wear protection and high film strength for high revving motorcycle engines
Specialized additives help prevent against ring-sticking and build-up of harmful deposits
Exceeds API SG and JASO MA-2

For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual
Superior detergency that helps prevent deposit build-up
Advanced additives that help prevent engine wear
Seal conditioners help reduce leaks

Superior detergency that helps prevent deposit build-up
Superior oil burn-off protection versus leading conventional oils
Seal conditioners help reduce leaks
Advanced additives that help prevent engine wear
Exceeds ILSAC GF-5 and API SN standards

Superior detergency that helps prevent deposit build-up
Superior oil burn-off protection versus leading conventional oils
Seal conditioners help reduce leaks
Advanced additives that help prevent engine wear
Exceeds ILSAC GF-5 and API SN standards

Patented Phosphorus Replacement Technology to help extend the life of your emission system
10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
6X better wear protection, as measured in latest Sequence IVA engine test
1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection

20, 000 miles between drain intervals
Recommended for severe applications such as towing and hauling, high performance driving, frequent short trips or idling, dusty, humid or extreme temperature environment
Engineered with fluid titanium technology that offers maximum strength under pressure
Reduces metal-to-metal contact across a range of different driving speeds
Decreases engine deposit formation to help maximize engine response
Best advanced full synthetic money can buy
API SN, ILSAC GF-5, ACEA A1/B1, Meets Ford WSS-M2C947-A, Meets engine test requirements of Chrysler MS-6395

Advanced premium full synthetic motor oil to offer strength under extreme pressure
Titanium strong for maximum engine performance
Reduces metal-to-metal contact across a range of different driving speeds
Protects the engine for the entire drain interval even under extreme pressure
Decreases engine deposit formation to help maximize engine response
Best full synthetic money can buy
API SL, ACEA A3/B4, BMW Longlife-01, MB-Approval 229.5, Volkswagen 505 00/ 502 02

Recommended by world-leading car manufacturers
Engine protection for the entire drain interval even under extreme pressure
For use in both gasoline and light duty diesel applications
Superior engine protection vs conventional and synthetic blend oils

42 percent better rating on fighting power and robbing deposits
Superior engine protection with conventional and synthetic blend oils
Superior performance against deposits, wear and oxidation
Meets Mercedes Benz 229. 5 and 229. 3, Porsche A40, VW 505. 00 and 502. 00
API SN/CF, ACEA A3, ACEA B3, ACEA B4, A3/B4 certified

42 percent better rating on fighting power robbing deposits
Superior engine protection versus conventional and synthetic blend oils
Superior performance against deposits, wear and oxidation
Meets BMW Longlife 01, GM-LL-A-025, GM-LL-B-025, Mercedes Benz 229.1, 229.3, 229.5, Volkswagen 505.00, 502.00
Exceeds API SL, ACEA A3, ACEA B3, ACEA B4

Castrol EDGE 5W-30 LL is suitable for use in cars with petrol and diesel engines whose manufacturer recommends: ACEA C3
Castrol EDGE 5W-30 LL is approved for use in vehicles where the manufacturer recommends a lubricant 5W-30 with the standards VW 504 00 / 507 00, Porsche C30 or MB-Approval 229.31/229.51
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal separated and reduce friction to achieve maximum engine performance when you need it most.
Reduces friction that redicts power in all engine speeds and conditions
Offers a high level of fuel efficiency and low temperature performance

Castrol EDGE Euro Car product range has been optimized to meet the stringent requirements of the various European Automobile Manufacturers Association or ACEA oil sequences. These standards can apply to both gasoline and diesel powered engines and are often more demanding than ILSAC/API requirements
Castrol EDGE Euro Car fluids are engineered with Fluid TITANIUM Technology to transform under pressure, increasing its film strength to prevent oil breakdown, reduce friction and have been optimized to deliver up to 40 percentbetter performance against ACEA standards to unlock maximum engine performance.
For use in both gasoline and light duty diesel applications
Specifications: ACEA C3 / MB Approval …

Package Dimensions: 24.13 H X 20.32 L X 22.86 W (Centimetres)
Superior Performance Against Deposits, Wear And Oxidation
Country Of Origin : United States
Package Weight: 5.488 Kilograms

3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade
10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit
6X better wear protection, Protection for 10,000 miles between oil changes
1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit
Meets ILSAC GF-6 to prevent low speed pre ignition (LSPI) and timing chain wear protection

For best performance, follow the manufacturer's recommendations in your vehicle owner’s manual.
Three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils
Unique titanium technology physically changes the way oil behaves under extreme pressures
Maximized engine performance

42 percent better rating on fighting power robbing deposits
Superior engine protection vs conventional and synthetic blend oils
Superior performance against deposits, wear and oxidation. Bottle Color: Black
Meets the needs of Honda, Toyota, Acura, Lexus and other vehicles where 0W-20 grade is recommended
Exceeds ILSAC GF-5, API SN, ACEA A1, ACEA B1

Unlock the true performance of your engine with Castrol EDGE
Engineered with patented Fluid TITANIUM Technology that transforms to be stronger under pressure and reduces friction for maximum engine performance.
3x stronger than Mobil 1 against viscosity breakdown (per the Kurt Orbahn test in the 5w-30 vis-grade)
6x stronger against wear caused by metal-to-metal contact vs industry standards ** (Seq IVA vs API SN PLUS Limits)
10x stronger against high temperature oil thickening vs. industry standards(Seq IIIH vs API SN PLUS Limits)