Other Hand Tools Gardner

This compound seals conduit openings against drafts, dust moisture and noise. It also protects terminal boxes, pot heads and bushings from corrosive elements and deadens switch gear panel noise. The dough-like compound is easily thumbed over holes and gaps. It will not harden or form a skin under normal conditions.

Ox-Gard Anti-Oxidant Compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a twofold effect it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard Anti-Oxidant Compound is manufactured with unique grease …

Ox-Gard Anti-Oxidant Compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface. This has a twofold effect; it improves electrical conductivity and it improves thermal conductivity. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate. Ox-Gard Anti-Oxidant Compound is manufactured with unique grease …

Gardner Bender 4-point knockout punches and dies are designed to punch clean, round holes through 10 gauge mild steel, 12 gauge stainless steel or other soft metals up to 0.135 inch in thickness. Punches and dies are interchangeable, in any combination, with most brands of knockouts. This kit includes punch, die and drive screw to punch a hole diameter sufficient for 1/2 inch diameter pipe / conduit, actual hole diameter is 0.873 inch additional sizes available to specifically permit fast and easy installation of electrical conduit and pipe of nominal sizes 1/2 inch through 4 inch, in all commonly available increments.

Gardner Bender 4-point knockout punches and dies are designed to punch clean, round holes through 10 gauge mild steel, 12 gauge stainless steel or other soft metals up to 0.135 inch in thickness. Punches and dies are interchangeable, in any combination, with most brands of knockouts. This kit includes punch, die and drive screw to punch a hole diameter sufficient for 3/4 inch diameter pipe / conduit, actual hole diameter is 1.086 inch additional sizes available to specifically permit fast and easy installation of electrical conduit and pipe of nominal sizes 1/2 inch through 4 inch, in all commonly available increments.

The TT-10B is a three in one tapping tool designed for electrical work. The tool cleans and rethreads holes and is made of top grade steel.

Wire-Aide Wire-Pulling Lubricant slides on smoothly and clings throughout the pull. This go-to lubricant won't damage conduit or insulation and is suitable for fiber-optic wire. The yellow modified wax-base formula offers the viscosity of a heavy cream-like paste and dries to a slippery waxy film that cleans up quickly with soap and hot water. Formula is non-toxic, non-hardening, non-combustible, non-staining to hard surfaces and non-corrosive to metals and withstands multiple freeze-thaw cycles without drying out in the container making its shelf-life indefinite.