Other Hand Tools JOHNSON

Johnson 12 inch architect's rule features a solid aluminum frame and easy reading etched graduations. The tool's 12 inch scale is divided in 3 inch, 1-1/2 inch, 1 inch, 3/4 inch, 3/8 inch, 3/16 inch, 3/32 inch, 1/2 inch, 1/4 inch, 1/8 inch per feet. This is an ideal tool for architects or professionals plans to scale.

Crafted from sturdy extruded aluminum, this yardstick features. And the yardstick's clear, protective anodized finish protects it from wear and tear, extending the life of the tool.

Measuring angles is a snap with Johnson's magnetic angle locator. It features a high-impact molded body and an extra-strong ceramic magnet that sticks to ferrous metal surfaces, while the v-groove edges fit perfectly onto pipe and conduit. Easy to read increments show 0-90° in all four quadrants on the durable acrylic lens, and the sides are marked with length graduations for convenience - one leg shows inch graduations while the other leg shows metric graduations.

The Johnson 48-inch Aluminum straight-edge ruler gives you the ability to mark straight edges and measure over long distances. It is made of extruded Aluminum with a clear silver anodized finish.

Johnson's J72 Straight Edge is made with heavy duty aluminum and allows you to take a quick measurement with its bold and easy to read numbers.

Full access bifold door hardware for 1601 Seris.

The panel hardware set includes patented tricycle hangers with large ball bearing wheels that ride smoothly and quietly on convex shaped rails with precise single point contact. The hangers feature a quick disconnect clip system to facilitate easy mounting.

The panel hardware set includes patented tricycle hangers with large ball bearing wheels that ride smoothly and quietly on convex shaped rails with precise single point contact. The hangers feature a quick disconnect clip system to facilitate easy mounting.

The panel hardware set includes patented tricycle hangers with large ball bearing wheels that ride smoothly and quietly on convex shaped rails with precise single point contact. The hangers feature a quick disconnect clip system to facilitate easy mounting.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

The 1500HD Series pocket door frame is designed to carry heavy solid core doors weighing up to 200 lb Ball bearing hanger wheels provide feather-touch door operation making the 1500HD one of the smoothest rolling pocket door installations available. The 1500 is designed to be quickly installed into prepared 2 x 4 timber frame stud walls however, the 1500 can also be adapted for use in various wall thicknesses and with various wall materials and structures. The 1500 frame kit is packaged for easy transport and fast installation for either single or converging 2 door applications and all frame sizes can be cut down to accommodate custom size doors.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

The 1500PF Series Standard-Duty Pocket Door Frame is designed to carry heavy standard size doors (up to 125lbs each) in standard 2 x 4 timber or steel framed stud walls. The 1500PF frame kit is packaged for easy transport and fast installation for either single door or converging door applications. The 1500PF is a versatile frame and can be adapted for use in non standard wall thicknesses, block masonry walls and can be cut down to accept any smaller size door size.

The 1510 Series 36 in x 80 in Primed Pocket Door Jamb Kit is exactly what you need to finish your pocket door opening. Primed and ready for you to finish with the color of your choice. It gets the job done for a clean, professional finish.

The 1560 Series Pocket Door Frame is designed to carry heavy solid core doors weighing up to 200 lb. each and up to 3 in. thick in standard 2 x 6 timber or steel framed stud walls. The 1560 frame kit is packaged for easy transport and fast installation.

"The 2200 is general purpose residential grade sliding by-pass door hardware for 3/4"" [19mm] OR 1-3/8"" [35mm] thick doors featuring a extruded aluminum track. Convex track rails provide single point contact between wheel and track for quiet feather touch operation. Hangers include one or two 7/8"" [22mm] dia. molded nylon machine turned wheels with three point locking plates. Hangers adjust without removing or relocating screws. Door guide adjusts laterally for quick door alignment."

"The 2200 is general purpose residential grade sliding by-pass door hardware for 3/4"" [19mm] OR 1-3/8"" [35mm] thick doors featuring a extruded aluminum track. Convex track rails provide single point contact between wheel and track for quiet feather touch operation. Hangers include one or two 7/8"" [22mm] dia. molded nylon machine turned wheels with three point locking plates. Hangers adjust without removing or relocating screws. Door guide adjusts laterally for quick door alignment."

"The 2200 is general purpose residential grade sliding by-pass door hardware for 3/4"" [19mm] OR 1-3/8"" [35mm] thick doors featuring a extruded aluminum track. Convex track rails provide single point contact between wheel and track for quiet feather touch operation. Hangers include one or two 7/8"" [22mm] dia. molded nylon machine turned wheels with three point locking plates. Hangers adjust without removing or relocating screws. Door guide adjusts laterally for quick door alignment."

"The 2200 is general purpose residential grade sliding by-pass door hardware for 3/4"" [19mm] OR 1-3/8"" [35mm] thick doors featuring a extruded aluminum track. Convex track rails provide single point contact between wheel and track for quiet feather touch operation. Hangers include one or two 7/8"" [22mm] dia. molded nylon machine turned wheels with three point locking plates. Hangers adjust without removing or relocating screws. Door guide adjusts laterally for quick door alignment."

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.

Since 1958 L.E. Johnson Products has produced a complete line of superior quality sliding and folding door hardware, pocket door frames and closet hardware.