Inexpensive circulation Pumps

1-1/2-Inch HV FNPT flange kit Two (2) flanges Four (4) nuts Four (4) bolts Two (2) gaskets

WZV.75, Bronze 2-Way Zone Valves Controls the flow in your hydronic system

WZV1.0, Bronze 2-Way Zone Valves Controls the flow in your hydronic system

Cast Iron Pump 1/25 HP, Flow: 0-17 GPM, Head Range: 0-19. 5 Ft. Max System Pressure: 145 PSI UL/CSA Listed, Includes Rubber Gaskets Temperature Range: 36-230° F

Ceramic shaft and radical bearings Carbon axial bearing Stainless steel rotor can and bearing plate Corrosion-resistant impeller Cast iron pump housing

Easy to Install Wet Rotor Design Single Stage Motor Heating systems Open and closed systems

Cast iron housing, 90 degrees rotated flanges, three speed motor (Low/Med/High) - Max head: 16 feet Built-in motor protection for longer life and better performance. - 24/30 months warranty on material/workmanship Suitable for a wide range of applications, including water and glycol radiant floor heating, hydronic heating, fan coil heating, solar water heating, etc... Whisper-quiet operation for sound sensitive installations Includes (2) Gaskets (O-rings) / UL/CSA listed - Made in France

Uses 3/4-Inch - 1-1/2-Inch standard flange. Standard orientation Temperature range 14 Degree Fahrenheit to 230 Degree Fahrenheit 21-feet maximum head with 21 GPM max flow rate Can be installed in any position where the shaft is horizontal Stainless steel shaft

Cast item construction Terminal box in 3-6-9-12 o'clock position Three pre-selectable speeds Connection sizes: 1-1/2", 3/4", 1-1/4" 19 GPM max flow at 21' max head

Rotating flange and installation check valve included Stainless Steel Shaft Three-speed cast iron 4171560

Sturdy cast iron housing Flow range: 0- 15.5 US gpm, head range from 1 to 15-feet 2 pole, single phase, 115-volt motors Two 3/4-Inch bolt holes (flanges not included).Maintenance-free, low energy consumption, easy to install, quiet running Max. power input:85 W Water consumption: 155.0 gallons. Mains frequency- 60 Hz

TLC = Timer, Line Cord, 6-Foot Flow range: 0 - 9 U.S. GPM, Head range: 0 - 6-Foot Motors: Single phase, 115V. Supply Voltage:115-120 VAC, 60 hertz, Contact Rating: 16 amps Connection: 3/4-Inch M by 3/4-Inch FNPT.Maintenance-free, low energy consumption, easy to install, quiet running The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems

Quick connect terminals-for easy installation Removable check valve-no need for an in-line flow check Patented electronic starting unit-highest starting in its class

Easy installation Miminize water waste Lower energy consumption

Built-in motor protection for long life Multiple accessories for a variety of applications Whisper-quiet operation for sound sensitive installations Applications include Hydronic heating with potable water Fan coil heating Model Number: 59896114 Item Package Dimensions: 15.24" L x 19.05" W x 19.05" H Item Package Weight: 5.6 lb

GRUNDFOS UP15-29SU/LC Stainless Steel Circulator Pump w/ Line Cord 1-1/4" Union, 1/8 HP, 115V

Size: 1 IN Voltage: 115 V-AC SKU: D459636 (CTO)

Built-in motor protection for long life. Multiple accessories for a variety of applications Whisper-quiet operation for sound sensitive installations Applications include Hydronic heating with potable water, Fan coil heating

Cast iron housing, fixed flanges, three speed motor (Low/Med/High) and a built-in, removable check valve - Max head: 33 feet Suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types, Whisper-quiet operation for sound sensitive installations Includes (2) Gaskets (O-rings) and one removable check-valve UL/CSA listed

Fixed flanges Cast iron housing / Built-in motor protection for longer life and better performance Suitable for a wide range of applications, including radiant heating, hydronic heating, fan coil heating, solar and other system types Whisper-quiet operation for sound sensitive installations Includes (2) Gaskets (O-rings) and one removable check-valve UL/CSA listed

1/6 horsepower Flow Range: 0- 33 GPM, Head Range: 0- 29-Feet Motors: 2 Pole, Single Phase, 115-Volt Connections: Flanged 1/2-Inch, 3/4-Inch, 1-Inch, 1-1/4-Inch Maintenance-free, low energy consumption, easy to install, quiet running

115 Volt, Single Phase 3/4" - 1-1/2" Two Bolt Flange - Standard Orientation Cast Iron Max Flow: 38GPM Max Head: 33ft.