Kitchen Sinks

An accessorized Rotondo works for garden room, baking center, or laundry
Base Cabinet Required: 18"
Cut-Out: 16 9/16"
Note: To under mount use inner dimension for cut-out

Reversible basin
Includes 2 tap holes
Easy and uncomplicated to assemble

Stainless steel 18/10 smooth
Colour: matt finish
Basin reversible
Detail 770 x 480 cm.
92mm strainer

Modern basin made of polished stainless steel for flush installation
Basin: 450 x 400 x 200 mm
Strainer basket valve diameter 92 mm with overflow in the basin
Base cabinets from 50 cm

Always ready - Li-Ion battery: no self-discharge, no memory effect electronic cell protection (ECP): protects the battery against overload, overheating and total discharge.

Compact Sink Unit in contemporary design. With large strainer.
Kitchen sink made of high-quality stainless steel (quality chrome nickel steel 1.4301). CE mark. According to standard DIN EN 13310. All fixings required for installation. Polyurethane seal underfoamed.
Compact sink in contemporary design. With large basket strainer valve.
Kitchen sink made of high-quality stainless steel (1.4301 chrome-nickel steel rating). CE mark. Complies with standard DIN EN 13310. Includes mounting material required for installation. Polyurethane foam seal.
Compact sink with contemporary design. With large basket strainer valve.

Kitchen sink made of high-quality stainless steel (1.4301 chrome-nickel steel rating). CE mark. Conforms to standard DIN EN 13310. Installation material included. Polyurethane foam seal.
Compact sink unit in contemporary design. With large strainer plug.

Modern kitchen sink made of polished stainless steel for installation
Basin: 330 x 400 x 180 mm
Rotary eccentric valve diameter 92 mm with overflow in the basin
Base cabinets from 45 cm

Modern sink made of high-quality pyragranite for installation
sink: 380 x 205 mm
rotary excenter valve 92 mm with overflow in the basin
base cabinets from 45 cm
hygienic thanks to material enrichment with Silver ions

Kitchen sink made of high-quality stainless steel (quality chrome nickel steel 1.4301). CE mark. According to standard DIN EN 13310. All fixings required for installation. Polyurethane seal underfoamed.
Quality sink in a contemporary design. Modern designed draining board High-quality workmanship. Flat edge design With waste basin

Modern sink made from high-quality pyragranite for installation
Basin: 450 x 420 x 195 mm
Rotary eccentric valve diameter 92 mm with overflow in the basin
Base cabinets from 60 cm
Hygienic thanks to material enrichment with silver ions

Measures 30" L X 16.13" W
Custom-designed to fit PRECIS 30" models 442534, 442535, 442931, 442537, 442530, 442739, 442536, 442531 & 442533
Made from durable stainless steel
Rear drain opening for easy access to drain
Non-skid protective feet and side bumpers for added stability and protection

Measures 9.88" L X 16" W
Custom-designed to fit PRECIS SUPER SINGLE sink models 440149, 440151, 440147, 441478, 442935, 442740, 440148, 441927 and 440150
Made from durable stainless steel
Non-skid protective feet and side bumpers for added stability and protection
Heat-resistant and dishwasher safe

Patented SILGRANIT material is heat, scratch, stain, chip and impact resistant
Hygienic+Plus Surface Technology acts as a protective shield against liquids and dirt
Convenient low divide sits above sink basin and makes it easier to handle large pots and baking sheets
Undermount installation makes for easy clean-up without dirt or grime building up around the rim
Basket strainer and installation clips sold separately

Kitchen sink Plados SL7420 with two bowls
Satin stainless steel
Size 745x440 mm
recessed hole 705x400 mm
Model to install SOTTOTOP

Single bowl Plados SL7400 kitchen sink
Satin stainless steel
Size 740x440 mm
Recessed hole 700x400 mm
model to install SUTTOTOP

Kitchen sink Plados MR5400 with one bowl
Satin stainless steel
Size 540x440 mm
Recessed hole 530x430 mm
Model to install FILOTOP

An essential addition to any kitchen, this sink & drainer from Franke's Ascona range is made from sturdy stainless steel. It has 1 bowl, a reversible drainer and comes without tap holes, so you can choose where to position your taps.
Stainless Steel sinks are practical, durable and easy to maintain with the stresses of everyday use. They are highly resistant to chipping and cracking whilst looking stylish in your kitchen.
Minimum cabinet width: 500 mm
Caring for your sink– Minor surface scratches are completely normal due to the natural properties of stainless steel.
Cleaning regularly with normal detergent and warm water and buffing with a soft cloth will help give your steel sink an ev…

Stainless Steel sinks are practical, durable and easy to maintain with the stresses of everyday use. They are highly resistant to chipping and cracking whilst looking stylish in your kitchen.
Suitable for a minimum base cabinet size of 45 cm
150mm Bowl Depth
Reversible Drainer
0.6mm Thickness

This versatile Kindred stainless steel bar sink kit is designed for a DIY home renovation and is perfect for a bar, rec room, or laundry room. With the easy-to-use EZ Torque installation system, you can install this drop-in sink into any countertop in a few simple steps. Made in North America from high-quality 20 gauge stainless steel, this sink has a durable, easy-to-clean finish and sound pads that reduce noise and vibration. The Kindred top-mount bar sink kit includes a 15 x 15 stainless steel sink that is six inches deep, a two-handle chrome faucet, and a waste fitting in one box.

Flawlessly suited for a bar, laundry or utility room
Chrome finish bar faucet and drain included
22 gauge stainless steel construction for top mount installation
Safe and easy installation Template and hardware included
Limited Lifetime

Drain Hole Location: Rear

Includes lead-free Satin Nickel pullout faucet
Satin Nickel soap dispenser and two strainer baskets included
Topmount double bowl sink
Ultraquiet sound deadening pads
20-Gauge stainless Steel