Climbing Gear UP3D

A compact ventral ascender for ascending ropes Strong points The attachment hole protrudes from the ascender’s body at a 90 degree angle. This ensures the device remains both upright and parallel to the user’s body and allows the rope to easily slide through the device. Positioned low on the harness to maximise progression with every move. All-metal construction of the operating mechanism to increase durability. An ergonomic protruding lever facilitates cam operation. Compatible with all PRO harnesses through the use of a FLAT LINK connector, which connects the harness to the ascender. Name Hold Up Standard EN 567 - 2013 Ø8-13mm | EN 12841 - 2006-B Ø 10-13mm 100kg

Double pulley, designed for the creation of an auto-blocking rescue winch in combination with the UP LOCK pulley. Main features: anodized light alloy side plates and pulleys; pulleys mounted on ball bearings; to be used with 8 to 11 mm EN 892 or EN 1891 ropes or with a Ø 8.0 mm EN 564 cord. Sizes 36 x 89 x 44 mm Ø Rope 8 ÷ 11 mm Weight 115 g

Main features: it allows for quick and smooth paying out of the rope; it allows the belayer to arrest a fall holding with the hand the free end of the rope; the climber can be lowered off with a slight pressure on the device, keeping under tension the rope free end with the other hand; optimized and suitable for Ø 8.6 ÷ 10.5 mm single ropes; if the rope is incorrectly installed in the device (the rope sides are inverted), thanks to the specific tapered (V-shaped) friction notches, effective belaying is still ensured, with safe braking and easy lowering of the climber. Attention!  Read carefully the device instructions before use. CLICK UP is supplied and must be used

Main features: it allows for quick and smooth paying out of the rope; it allows the belayer to arrest a fall holding with the hand the free end of the rope; the climber can be lowered off with a slight pressure on the device, keeping under tension the rope free end with the other hand; optimized and suitable for Ø 8.6 ÷ 10.5 mm single ropes; if the rope is incorrectly installed in the device (the rope sides are inverted), thanks to the specific tapered (V-shaped) friction notches, effective belaying is still ensured, with safe braking and easy lowering of the climber. Attention!  Read carefully the device instructions before use. CLICK UP is supplied and must be used

Main features: it allows for quick and smooth paying out of the rope; it allows the belayer to arrest a fall holding with the hand the free end of the rope; the climber can be lowered off with a slight pressure on the device, keeping under tension the rope free end with the other hand; optimized and suitable for Ø 8.6 ÷ 10.5 mm single ropes; if the rope is incorrectly installed in the device (the rope sides are inverted), thanks to the specific tapered (V-shaped) friction notches, effective belaying is still ensured, with safe braking and easy lowering of the climber. Attention!  Read carefully the device instructions before use. CLICK UP is supplied and must be used