Climbing Gear

An extendable sling lets you reduce rope drag without extra quickdraws, and can be replaced with DMM's in-house re-slinging service. Torque Nuts work in all conditions. They are especially useful in winter, when icy cracks cannot be protected with cams. However, Wired Torque Nuts are more resistant to accidental axe strikes and easier to control placing above your head. Product Name Product Code Colour Strength Weight Range Certification Torque Nut 1 A1741 Green 14kN 54g 31 / 41mm EN 12270:2013 Torque Nut 2 A1742 Red 14kN 70g 36 / 49mm EN 12270:2013 Torque Nut 3 A1743 Gold 14kN 104g 44 / 59mm EN 12270:2013 Torque Nut 4 A1744

Despite its low weight, the Mantis is a high-performance belay device, giving confident control over ropes from 11mm down to a super skinny 7.3mm. Ideal for those looking for a single belay device for all their climbing activities.

The perfect mid-size Offset D for situations where small size and volume are important i.e. confined spaces or tower climbing situations where the overall weight and size of a system is crucial. The Shadow gives plenty of security reserves whilst feeling featherweight on a harness or in a bag.

An extendable sling lets you reduce rope drag without extra quickdraws, and can be replaced with DMM's in-house re-slinging service. Torque Nuts work in all conditions. They are especially useful in winter, when icy cracks cannot be protected with cams. However, Wired Torque Nuts are more resistant to accidental axe strikes and easier to control placing above your head. Product Name Product Code Colour Strength Weight Range Certification Torque Nut 1 A1741 Green 14kN 54g 31 / 41mm EN 12270:2013 Torque Nut 2 A1742 Red 14kN 70g 36 / 49mm EN 12270:2013 Torque Nut 3 A1743 Gold 14kN 104g 44 / 59mm EN 12270:2013 Torque Nut 4 A1744

Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear.

An extendable sling lets you reduce rope drag without extra quickdraws, and can be replaced with DMM's in-house re-slinging service. Torque Nuts work in all conditions. They are especially useful in winter, when icy cracks cannot be protected with cams. However, Wired Torque Nuts are more resistant to accidental axe strikes and easier to control placing above your head. Product Name Product Code Colour Strength Weight Range Certification Torque Nut 1 A1741 Green 14kN 54g 31 / 41mm EN 12270:2013 Torque Nut 2 A1742 Red 14kN 70g 36 / 49mm EN 12270:2013 Torque Nut 3 A1743 Gold 14kN 104g 44 / 59mm EN 12270:2013 Torque Nut 4 A1744

Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear.

Despite its low weight, the Mantis is a high-performance belay device, giving confident control over ropes from 11mm down to a super skinny 7.3mm. Ideal for those looking for a single belay device for all their climbing activities.

Easy to operate with one hand, and able to locate on the belay loop in a single movement, the Ceros is intuitive to use and simple to rack. Correct orientation is achieved with an internal wiregate that keeps the Ceros captive on a belay loop, and a horn which prevents assisted braking devices moving onto the carabiner’s spine. Full section top bar gives smooth rope control and resists wear.

These are soldered directly on to wires, allowing a thicker wire to be used and increasing the strength of the IMP. The swage on the wire is colour coded for quick size selection, and allows one side of the wire to slide, letting the IMP self equalize when loaded and increasing placement security.IMP's are invaluable for those pushing into harder grades and need to take advantage of all protection options. Product Name Product Code Colour Strength Weight Range Certification IMP Brass Nut 1 A1721 Blue 4kN 4g 4.0 / 5.6mm EN 12270:2013 IMP Brass Nut 2 A1722 Red 5kN 8g 4.8 / 6.4mm EN 12270:2013 IMP Brass Nut 3 A1723

Full Gate carabiner with Key-Lock nose for the fixed point side of the express sling for easy hooking and unhooking Wire Gate carabiner for the rope side of the exe to save weight and prevent the whip lash effect Narrow wide sling made of polyamide saves weight and is wide enough to also serve as a "handle" times Twist lock keeps the lower carabiner in position. black / orange breaking load main axle: 24,00 kN breaking load secondary axle: 8,00 kN breaking load open: 10,00 kN cis E-Class-Number: 40-02-01-90 max. life: 10 years

Description 8 mm thread, fits ROCPEC hand drill Specifications Weight: 37 g

Robust aluminium carabiner with palm squeeze mechanism for use in PPE systems. Keylock closure mechanism for optimum handling when clipping and unclipping Palm squeeze mechanism prevents unintentional opening and ensures easy handling Width: 71 mm Length: 136 mm Gate opening: 25 mm Fmax. major axis: 33 kN Fmax. minor axis : 8 kN Fmax. open : 12 kN Certification : EN 12275 Certification : EN 362 Material : Aluminium Closure : Keylock

RIGGING PLATE 1/3 / RK713BB00 Device for multi-point anchoring helps to organize carabiners at the anchor point provides efficient force distribution at different load directions rounded holes allow direct attachment of ropes to the rigging plate central attachment point can accomodate up to three carabiners all attachment points are big enough to allow locking sleeves of most carabiners passing through Color black matt Weight 65 g • 2.3 oz Material light alloy Strength 36 kN Thickness 6 mm