Climbing Gear

Keylock closure system on upper carabiner for optimal handling when clipping and unclipping Available as either screwgate or Triple Lock model H-profile construction ensures best possible use of material and minimal weight Steel insert prevents premature wear from rope friction or bolt hangers Eco colour version: particularly sustainable as non-anodized TECHNICAL SPECIFICATIONS Fmax. major axis: 25 kN Fmax. open : 9 kN Fmax. minor axis : 9 kN Width: 89 mm Length: 110 mm Gate opening: 24 mm Certification : EN 12275, EN 362 Country of origin : Taiwan Material : Aluminium/Steel Closure : Screw Carabiner shape : HMS Bulletproof : Yes Not anodized : Yes

NLG’s Tether Choke™ with single securing arm is the solution for your big problem tools – those tools that are big in size and big in weight (maximum load of 18kg). The single securing arm combined with the simplicity of the Tether Choke™ only extends its area of uses. Specially developed for users of power tools with triggers, the securing arm allows the Choke™ to be locked in position with the approved Tether Tape and keeps the tool’s trigger restriction-free. The versatility of the Tether Choke™ means it is approved to use as an anchor as well. Single securing arm guards against movement across both straight-shafted tools and power tools Optimised V Ring design for

screw lock can be used for securing of persons 90° twist allows smoother orientation of any part Color: zinc-plated Weight: 106 g • 3.74 oz Material: zinc-plated steel Diameter: 8 mm Strength major axis: 32 kN Strength minor axis: 10 kN Gate opening (d): 17.5 mm

• two mini screw lock carabiners can be attached to the tool’s spike or head • V-shaped elastic webbing is short enough for tanglefree handling and may be stretched for maximum reach • length of the lanyards can be extended from 80 up to 135 cm (incl. carabiners) and so allows free movements • suitable for ice climbing, mix climbing and steep couloirs  WARNING! Do not use as a fall absorber! Do not use as a belay stance lanyard! Strength: 300 kg Gate opening (d): 12 mm Weight: 94 g • 3.32 oz Length: 80 – 135 cm incl. carabiners Material: 85% PAD, 0,5% PES, 14.5% elastic fibre carabiner – aluminium alloy 

Eagle is a light-weight HMS carabiner suitable for belaying with a UIAA knot or to be used with belay devices. The ergonomic design enables easy locking with one hand only and comfortable grip. Its shape was designed with the intention to balance weight, strength and size. The profile of the upper part enables reliable and safe manipulation with the rope. Triple-lock gate with keylock nose "Rope friendly" shape to avoid excessive wear of rope Erconomic body Optimal weight, strength and size balance Weight 76 g Major axis strength 25 kN Minor axis strength 10 kN Open gate strength 7 kN Gate opening 23 mm External dimensions 103 x 75 mm

Main features: made in anodized light alloy; sheaves mounted on self-lubricating bushings; for use with ropes Ø ≤ 13 mm; designed for hauling systems and deviations. Sizes 48 x 85 x 29 mm Ø Rope ≤ 13 mm Weight 100g

Osprey is a hot-forged carabiner of classic oval shape suitable for technical and bigwall climbing. It´s invaluable on working with pulleys. The utility value of this carabiner is increased by Ocún’s typical rope friendly shape of the upper profile, which makes the Osprey usable for HMS belaying in case of an emergency. If climbers owned just one carabiner, it should be the Osprey. Triple twist-lock gate with keylock nose "Rope friendly" shape to avoid excessive wear of rope Ergonomic body Optimal weight, strength and size balance Weight 73 g Major axis strength 25 kN Minor axis strength 9 kN Open gate strength 6 kN Gate opening 22 mm External

FEATURES – Numbered for quick identification

FEATURES – Numbered for quick identification

FEATURES – Numbered for quick identification

FEATURES – Numbered for quick identification

FEATURES – Straight gate HotForge on top and bent gate HotForge on the bottom – Colored bottom HotWire carabiner for visual target while climbing – Dual keylocks ease clipping and cleaning – Equipped with an 18 mm Polyester Dogbone with Straitjacket – Available in 12 or 16 cm lengths

FEATURES – Passive spring design for holding power – Easy clip-in point

FEATURES – Numbered for quick identification

FEATURES – Numbered for quick identification

FEATURES – Dynex™ is highly abrasion resistant, strong and lightweight – 10 mm wide Dynex™ – Colors specific to lengths

FEATURES – Numbered for quick identification

FEATURES – Numbered for quick identification

When faced with incipient cracks, the Ultimate Reality Piton is the weapon of choice. It has a large anvil for hammering and a small lip to help with removal. Thickness tapers from 0.5 mm (0.02”) to 1.5 mm (0.06”) Chromoly steel Swaged steel cable Weight: 19 g

Lightweight aluminum alloy carabiner with a wide gate opening and high strength-to-weight ratio thanks to its unique design. Keylock closure prevents snagging during use. Automatic lock requires two actions to open: twist and pull. NEW 2024: two new colors, blue and green. Standard(s): EN 362 – EN 12275 Height (mm) : 117 Width (mm): 75 Gate Opening (mm): 24 Major Axis (kN): 28 Minor Axis (kN): 9 Open Gate (kN): 8 Material: Aluminum alloy Weight: 82 g, 2.9 oz

A wide tripod base makes these hooks remarkably stable during dicey aid moves. Due to the way they hang on the rack, these hooks are also less prone to snagging than other designs. Narrow (5 mm, 0.2”), chisel-shaped tooth maximizes holding power Chromoly steel Ref. Product name Weight Material g oz 303601C CAPTAIN HOOK - Small 23 0.8 NiCrMo Steel 303602C CAPTAIN HOOK - Medium 32 1.1 NiCrMo Steel 303603C CAPTAIN HOOK - Large 52 1.8 NiCrMo Steel

Casual chalk bag with a drawcord closer. Made of bluesign®-certified materials 3 brush holders Draw cord closure for easy tightening VCR key pocket TECHNICAL SPECIFICATIONS Diameter: 14 mm Depth: 16 cm Country of origin : Vietnam

Casual chalk bag with a drawcord closer. Made of bluesign®-certified materials 3 brush holders Draw cord closure for easy tightening VCR key pocket TECHNICAL SPECIFICATIONS Diameter: 14 mm Depth: 16 cm Country of origin : Vietnam

Casual chalk bag with a drawcord closer. Made of bluesign®-certified materials 3 brush holders Draw cord closure for easy tightening VCR key pocket TECHNICAL SPECIFICATIONS Diameter: 14 mm Depth: 16 cm Country of origin : Vietnam