Climbing Gear Anchor

Is used in the rope access and rescue sector. Load capacity of 26kN Different lengths in different colours Rope access technology and rescues ART. NO. L-0008 EAN 4030281063360 STANDARD EN 354:2010 (MAX. 2M), EN 566:2017, EN 795-B:2012 COLOUR grey BREAKING LOAD, MAJOR AXIS 26,00 kN DIAMETER 25,00 mm E-CLASS NUMBER 40-02-01-90 HAND-WASHING 40 °C MAX. SERVICE LIFE 10 Years TEMPERATURE 45 °C - -35 °C AREA OF APPLICATION Fire brigade / Rescue / Special Forces, Rope Access / Rigging

Is used in the rope access and rescue sector. Load capacity of 26kN Different lengths in different colours Rope access technology and rescues ART. NO. L-0008 EAN 4030281063360 STANDARD EN 354:2010 (MAX. 2M), EN 566:2017, EN 795-B:2012 COLOUR grey BREAKING LOAD, MAJOR AXIS 26,00 kN DIAMETER 25,00 mm E-CLASS NUMBER 40-02-01-90 HAND-WASHING 40 °C MAX. SERVICE LIFE 10 Years TEMPERATURE 45 °C - -35 °C AREA OF APPLICATION Fire brigade / Rescue / Special Forces, Rope Access / Rigging

The TriLock™ Velcro Anchor has been designed to quickly create a secure anchor point on rails or alternatively a secure tether point on heavier tools. The clever triple Velcro layering allows for an extremely secure fit whilst being easy to attach and remove. The TriLock™ Velcro Anchor provides a very robust anchor point on tools, rails – in fact on almost any item. The TriLock™ mechanism is easy to attach and remove but extremely strong. Built for extended and hard use the TriLock™ Velcro Anchor utilises high-strength webbing and a welded D ring. For added safety, it features contrast stitching which allows for quicker visual inspections. The versatility of the TriLock™

Can be used as a mobile anchor point. The diameter of the black sling is 25mm Can be used as mobile anchor point Load capacity of 35kN diameter 25mm STANDARD EN 354:2010, EN 566:2017, EN 795-B:2012 BREAKING LOAD, MAJOR AXIS 35,00 kN DIAMETER 25,00 mm E-CLASS NUMBER 40-02-01-90 HAND-WASHING 40 °C MAX. SERVICE LIFE 10 Years TEMPERATURE 45 °C - -35 °C AREA OF APPLICATION Construction / Roofer / Carpenter

Can be used as a mobile anchor point. The diameter of the black sling is 25mm Can be used as mobile anchor point Load capacity of 35kN diameter 25mm STANDARD EN 354:2010, EN 566:2017, EN 795-B:2012 BREAKING LOAD, MAJOR AXIS 35,00 kN DIAMETER 25,00 mm E-CLASS NUMBER 40-02-01-90 HAND-WASHING 40 °C MAX. SERVICE LIFE 10 Years TEMPERATURE 45 °C - -35 °C AREA OF APPLICATION Construction / Roofer / Carpenter

WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve helps keep the connector in position and facilitates clipping. It is available in five lengths (50, 100, 150, 200 and 300 cm). Description Rugged construction: - 6.5 mm diameter galvanized steel - polyurethane sheath with UV treatment Two terminations of different sizes offer multiple configurations for setting up an anchor: - directly to an anchor point - wrapped around a structural anchor - choked around a structural anchor,

Description Offers several configurations for setting up an anchorage: - directly on an anchor - around an anchoring structure - choked on an anchoring structure, thanks to the different sizes of the attachment points Durable construction: - abrasion-resistant webbing - forged steel attachment points Available in three lengths: 100, 150 and 200 cm. Strap length is immediately identified by a label on the strap end featuring the large loop Specifications Breaking strength: 25kN Certification(s): CE EN 795 B, NFPA 1983 General Use, ANSI Z359.18, CSA Z259.15-17, UKCA References References G010AA00 G010AA01 G010AA02 Length 100 cm 150 cm 200 cm

WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve helps keep the connector in position and facilitates clipping. It is available in five lengths (50, 100, 150, 200 and 300 cm). Description Rugged construction: - 6.5 mm diameter galvanized steel - polyurethane sheath with UV treatment Two terminations of different sizes offer multiple configurations for setting up an anchor: - directly to an anchor point - wrapped around a structural anchor - choked around a structural anchor,

Description Offers several configurations for setting up an anchorage: - directly on an anchor - around an anchoring structure - choked on an anchoring structure, thanks to the different sizes of the attachment points Durable construction: - abrasion-resistant webbing - forged steel attachment points Available in three lengths: 100, 150 and 200 cm. Strap length is immediately identified by a label on the strap end featuring the large loop Specifications Breaking strength: 25kN Certification(s): CE EN 795 B, NFPA 1983 General Use, ANSI Z359.18, CSA Z259.15-17, UKCA References References G010AA00 G010AA01 G010AA02 Length 100 cm 150 cm 200 cm

WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve helps keep the connector in position and facilitates clipping. It is available in five lengths (50, 100, 150, 200 and 300 cm). Description Rugged construction: - 6.5 mm diameter galvanized steel - polyurethane sheath with UV treatment Two terminations of different sizes offer multiple configurations for setting up an anchor: - directly to an anchor point - wrapped around a structural anchor - choked around a structural anchor,

Detachable anchor system. The ESCAPER allows you to use a single length of rope and to rappel it from remove locations. It can be used with all rope diameters, the limits being imposed by the braking device that is used with the rope. It works with rope lengths up to 80m. The length can be limited by the friction of the rope. To retrieve the ESCAPER, pull then / release the rope. It takes an average of 8 consecutive pull/release motions to detach and retrieve the ESCAPER. Strong Points Extremely safe, it only requires a tension of 10 kg to avoid the locking system from sliding. A total loosening of the tension on the rope generates a sliding of a few centimeters. A sliding of at

WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve helps keep the connector in position and facilitates clipping. It is available in five lengths (50, 100, 150, 200 and 300 cm). Description Rugged construction: - 6.5 mm diameter galvanized steel - polyurethane sheath with UV treatment Two terminations of different sizes offer multiple configurations for setting up an anchor: - directly to an anchor point - wrapped around a structural anchor - choked around a structural anchor,

The Heavy Duty Anchor Choke™ is like the rest of the Choke™ family but even bigger and stronger. Designed to make a fast and secure anchor point for tool lanyards and storage equipment like the Ascent Bucket™, the Anchor Choke™ safely wraps around scaffolding, rails and beams and provides a strong V-Ring for connectors to attach to. The extended length means that it still works with larger beams. Because of the twin securing arms which can be locked with NLG’s approved Tether Tape™, the Anchor Choke™ can also be used to create an attachment point on heavier tools, like breakers, up to 40KG. Twin securing arm guards against movement on rails and allows it to be used as a

SNAKE BRACE / W201* Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems. intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole intended for a single user the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions the minimum strength of the construction should

STANDARD EN 354:2010, EN 566:2017, EN 795-B:2012 COLOR red / white DIAMETER 16,00 mm E-CLASS NUMBER 40-02-01-90 HAND-WASHING 40 °C MAX. SERVICE LIFE 10 Years TEMPERATURE 45 °C - -35 °C CUSTOMS  NO. 63079098 WEIGHT 0,15 kg MATERIAL Polyethylene WEBBING MATERIAL Polyethylene

WIRE STROP is an anchor strap made of 6.5 mm diameter galvanized steel with two terminations of different sizes. It offers several configurations for setting up an anchor: directly to an anchor point or around a suitable structure. The plastic sleeve helps keep the connector in position and facilitates clipping. It is available in five lengths (50, 100, 150, 200 and 300 cm). Description Rugged construction: - 6.5 mm diameter galvanized steel - polyurethane sheath with UV treatment Two terminations of different sizes offer multiple configurations for setting up an anchor: - directly to an anchor point - wrapped around a structural anchor - choked around a structural anchor,

Description Quick to use: - Can be placed instantly by activating the release plunger - Anchor can be completely removed by pressing on the release plunger and pulling on the hanger Convenient: - Easy to install and remove - Locking knob for extended use or use with groups - Knob is textured for better grip, even with gloves - Twisted hanger designed to hold the connector parallel to the wall - Interchangeable hanger More ethical anchor placement for caving: - Anchor is not left underground to rust - User has control over the condition of the anchor Specifications Material(s): Stainless steel, aluminum, nylon Certification(s): CE EN 795 B, UKCA

SNAKE BRACE / W201* Anchor point for through holes, designed to function as a link between the structure and the fall arrest, work positioning, rope access or rescue systems. intended for through holes whose minimum and maximum diameter corresponds to the type of Snake Brace in relation to the actual thickness of the current structure the opening need not be entirely regular but the minimum diameter must be flat; there must be a minimum space for installation behind the hole intended for a single user the maximum strength can be used only if the structure in which the anchor hole is located can withstand the load in all directions the minimum strength of the construction should

A compact and extremely versatile rigging system featuring our proprietary triple swivel design. The Gyro swivel rotates at all three connection points which allows for countless possibilities of connection between different elements that need freedom of movement. Just a few possibilities include: self-orienting multi-anchoring, multiple connections to a harness, preventing twisting in Y lanyards, cross-hauling operations, Tyrolean traverses, complex rescue procedures. The innovative design also prevents the accumulation of dirt and makes inspection easy. Main structure is carbon steel with a double corrosion preventive coating. Swivel balls and attachment points are stainless steel.