Climbing Gear

Design and Details Great capacity thanks to its large dimensions Ergonomics Available in two locking systems, each for different situations

Designed for belaying, rappelling, or anchors, the Black Diamond RockLock Twistlock Carabiner makes your climb safer. This carabiner has a square hinge end that securely holds your belay loop and is easily operable with one hand. DESIGN Climbing carabiner with hot-forged construction Curved spine for wide gate opening Square hinge securely holds belay loop Easy to operate with one hand Snag-free Keylock nose Twistlock sleeve Uses Type H or HMS connector – can be used with Munter Hitch or belay device SPECS Weight: 89 g (3.1oz.) Gate Opening: 24 mm (0.95”) Gate Strength (Closed): 24 kN (5395 lbf) Gate Strength (Open): 8 kN (1,798 lbf) Minor Axis Strength: 8 kN (1,798 lbf) Additional Details Styl…

Design and Details Three (yes, that's one additional!) placement modes: active cam and 2 passive chocks Works where nothing else can fit, such as solution pockets Excellent in horizontal cracks Features new, stiffer sewing on the slings for easier one-handed placement and extraction

Design and Details New HotForge on top and redesigned HotWire wiregate on the bottom Colored bottom HotWire carabiner for visual target while climbing Snag-free keylock top biner for easy bolt clipping Equipped with an 18mm Polyester Dogbone with Straitjacket

Features: Carabiner optimized for lightness and durability Very compact shape is ideal for belay stations H-shaped cross section offers an improved strength/weight ratio Wider contact surfaces for better rope glide and reduced wear on the carabiner Easy to use, for efficient handling Screw lock locking sleeve for good handling and effective locking Visual indicator facilitates checking that the carabiner is locked Nose and keylock system helps avoid the carabiner snagging during maneuvers Carabiner designed for better rope glide Shape adapted for easy tying or untying of a clove hitch

Design and Details Straight gate HotForge on top and bent gate HotForge on the bottom Colored bottom HotForge carabiner for visual target while climbing Dual keylocks ease clipping and cleaning Equipped with an 18mm polyester dogbone with straitjacket

Design and Details Material: Polycarbonate

Design and Details Enhanced nose design Superlight Clean-wire, no-hook gate 2 mm wire gate I beam back Hot forged High gate open strength 10 mm Dyneema Vice locator

Design and Details High-strength HMS carabiner with automatic lock that requires two actions (twist and pull) to open Double-action twist lock sleeve is easy to engage with one hand Large gate opening and proprietary SphereLock nose make clipping ropes and webbing easy

Design and Details Symmetrical oval shape allows optimal loading of devices with a wide section, such as pulleys, ascenders and progress capture pulleys Easier handling Fluid interior design limits the risk of having a catch point and facilitates rotation of the carabiner Key lock system to avoid any involuntary snagging of the carabiner The H cross-section contributes to better grip, protects the markings from abrasion and reduces weight Available in three different locking systems BALL-LOCK: automatic locking system designed for frequent manipulation, with lock indicator. Triple-action opening by pressing on the green indicator, turning the sleeve, then pressing on the gate. The green button …

Design and Details High-strength HMS carabiner with a secure screw lock closure and a proprietary inner gate to prevent cross-loading New screw gate is lightweight and easy to handle Proprietary SphereLock nose make clipping ropes and webbing easy Laser etched marking to indicate if the lock is open or closed

Features: Integrated stash bag clips easily to a harness Three reinforced steps with grab-handle that can be inverted for a fourth step

Design and Details Sewn loops of 10.5 mm Dyneema webbing available in 4 lengths: 30, 60, 120 and 240 cm. Lightweight and low profile, they are ideal for building anchors and for use as extendable quickdraws. The 120 and 240 cm lengths are long enough to be equalized in anchors and the 60 cm is the right length for tripling as extendable quickdraws with lightweight carabiners. Breaking load: 22 kN Weight: 0.4 oz (30 cm), 0.7 oz (60 cm), 1.4 oz (120 cm), 2.6 oz (240 cm)

Design and Details Lightweight quickdraw for climbing at the highest level Equipped with a straight gate Photon carabiner on the bolt end and a hyperlight Photon Wire carabiner on the rope end Photon is our lightest solid gate carabiner featuring our proprietary SphereLock closure for easy cleaning Photon Wire delivers pure clipping bliss with its finely contoured, perfectly tensioned gate and large gate opening Variable width polyester dogbones are particularly easy to grab while projecting sport routes Features the proprietary Karstop Evo carabiner retainer on the rope end

Design and Details Frequent use, secure use with triple-action opening Great functionality Good handling and ergonomics Available in three locking systems, each for different situations

Design and Details Very easy to use belay/rappel biner that keeps the carabiner properly aligned on the belay loop to help prevent cross loading Widened spine to prevent the migration of semi-automatic belay devices Hot-forged Strength: 22 kN (4950 lbf) Individually proof tested CE/UIAA certified

Design and Details Specific use when quick opening Great functionality Good handling and ergonomics Available in three locking systems, each for different situations

Sling has a narrow 8mm width and a low-profile connection in place of a knot Dyneema®, a polyethylene fiber, is incredibly strong, lightweight and resistant to moisture and ultraviolet light Contact stitching technique gives the sling great handling, even in the area of the seam Add a couple lightweight carabiners (sold separately) to make your own extendable sling for alpine climbing Imported

Designed for belaying, the Black Diamond GridLock Screwgate Carabiner makes your climb safer. This carabiner isolates your belay loop to prevent shifting and crossloading. With its maximum strength I-beam spine, your rope will feed smoothly, making this carabiner easy to use. DESIGN Climbing carabiner with hot-forged construction Designed for belaying Easy-to-use Isolated belay loop eliminates cross-loading I-beam spine and rounded rope-bearing surface for strength Screwgate sleeve Uses Type H or HMS connector – can be used with Munter Hitch or belay device SPECS Weight: 76g (2.7 oz.) Gate Opening: 21 mm (0.83”) Gate Strength (Closed): 22 kN (4,946 lbf) Gate Strength (Open): 8 kN (1,798 lbf)…