Grinders & Polishers

Technology: The Active Feedback-sensing Technology (AFT) turns the motor off if the wheel's rotation is suddenly forced to stop. The Automatic Speed Change technology adjusts speed and torque during operation for optimum performance
Features: The soft start suppresses start-up reactions for smooth start-ups and longer gear life. It offers anti-restart protection to prevent motor start-up when the battery is inserted with the switch locked on
Design: It is compact and ergonomic, only 14-3/4 inch long, and weighs only 6.6 lb with a battery (battery not included) for reduced operator fatigue. The soft rubberized grip provides increased comfort on the job
Efficient-Controlled: The electronically-controlled …

For use during cutting applications
Installs quickly and easily
High quality materials for long life
For use with Makita 4-1/2" Angle Grinders models XAG01Z, BGA452

The flap washer has a diameter of 125 mm and a hole of 22.23 mm.
The set includes two slat sanding discs 1 x P40 grit and 1 x P80 grit.
Thanks to the high number of slats, an optimal grinding image can be achieved, e.g. when smoothing welds, rust removal of metal, sanding paints and varnishes, sanding work on metal.
Suitable for all standard angle grinders with a peripheral speed of 80 m/s.
To be used with max. 12.250 min^-1

The diamond cutting disc suitable for angle grinders, cordless angle grinders or cutting grinders of various manufacturers with the dimensions Ø 115 x 1.2 and 22.23 mm bore. It is extra thin for little material loss and clean cutting edge.
Ideal for cutting granite, concrete, marble, tiles, ceramics, fine stone, natural stones and artificial stones.
Can be used with a maximum speed of rotation. 13 300 min^-1
The diamond cutting discs work faster and more efficiently at the same time 20% less energy consumption - your battery device proves with a longer battery life.

The set contains 5 extra thin cutting discs.
The disc fits almost all standard angle grinders with a rotation speed of 80 m/s.
Outer diameter: 150 mm.
Bore: 22.23 mm.
Thickness: approx. 1.4 mm.

The serrated disc has a diameter of 150 mm and a hole of 22.23 mm
The set contains two flap sanding discs: 1 x P40 grit and 1 x P80 grit
Thanks to the high number of slats, an optimal grinding pattern can be achieved, e.g. when smoothing welds, rust removal of metal, grinding paints and varnishes, grinding work on metal
Suitable for all standard angle grinders with a circumference speed of 80 m/s
For use with max. 10,200 min-1

The serrated disc has a diameter of 115 mm and a hole of 22.23 mm
The set contains two flap sanding discs: 1 x P40 grit and 1 x P80 grit
Thanks to the high number of slats, an optimal grinding pattern can be achieved, e.g. when smoothing welds, rust removal of metal, grinding paints and varnishes, grinding work on metal
Suitable for all standard angle grinders with a circumference speed of 80 m/s
For use with max. 12,250 min^-1

Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
Angle grinder cutting/tuck pt dust collection shroud
Hitachi genuine accessory
30-day warranty

Duo Grinder Set L2200 Diameter 230 + L1001 Diameter 125 Flex Supplied in Box – 492310

COMPATIBILITY - Compatible with 4-1/2 inches - 5 inches FLEX Angle Grinders
ONE-STEP GUARD ADJUSTMENT - Optimal convenience for every application
BLADE GUARD PROTECTION - Superior shielding for use with cutting wheels
4

Unbelievable power. The brushless EC-TEC motor of the RG 130 ECI performs impressively with outstanding, constant power without overheating. Having so much power allows you to achieve the perfect substrate in no time at all – effortlessly and without interruptions.
Excellent longevity. An extremely robust, resilient gearbox and the highly efficient, brushless EC-TEC motor make the RG 130 ECI surface-restoration grinder extremely durable – with minimal downtime.
Super dust extraction. In combination with the CT 36 AC and CT 48 AC Mobile Dust Extractors, the surface-restoration grinder guarantees low dust levels while working. The CT-VA pre-separator is the perfect addition for particularly high…

Work appropriately for the material: Speed can be steplessly adjusted between 4500 and 8500 rpm
Ideal ergonomics for cutting work: Its design means that it fits well in the user's hand, runs smoothly and generates few vibrations
Systems get it done: Compatible with the battery packs and chargers in the Festool 18 Volt System
Fully covered by comprehensive Festool 3-2-1 Service
Get results fast: Thanks to the powerful, brushless – and therefore maintenance-free – EC-TEC motor
Soft start-up, electronic overload protection, motor brake and restart protection
Robust and long-lasting: Enclosed motor and cast electronics are safely protected against dust

Work appropriately for the material: Speed can be steplessly adjusted between 4500 and 8500 rpm
Ideal ergonomics for cutting work: Its design means that it fits well in the user's hand, runs smoothly and generates few vibrations
Systems get it done: Compatible with the battery packs and chargers in the Festool 18 Volt System
Fully covered by comprehensive Festool 3-2-1 Service
Get results fast: Thanks to the powerful, brushless – and therefore maintenance-free – EC-TEC motor
Soft start-up, electronic overload protection, motor brake and restart protection
Robust and long-lasting: Enclosed motor and cast electronics are safely protected against dust

Work appropriately for the material: Speed can be steplessly adjusted between 4500 and 8500 rpm
Ideal ergonomics for cutting work: Its design means that it fits well in the user's hand, runs smoothly and generates few vibrations
Get results fast: Thanks to the powerful, brushless – and therefore maintenance-free – EC-TEC motor
Soft start-up, electronic overload protection, motor brake and restart protection
Robust and long-lasting: Enclosed motor and cast electronics are safely protected against dust

Work appropriately for the material: Speed can be steplessly adjusted between 4500 and 8500 rpm
Ideal ergonomics for cutting work: Its design means that it fits well in the user's hand, runs smoothly and generates few vibrations
Systems get it done: Compatible with the battery packs and chargers in the Festool 18 Volt System
Get results fast: Thanks to the powerful, brushless – and therefore maintenance-free – EC-TEC motor
Soft start-up, electronic overload protection, motor brake and restart protection

The lightest of its type
Solid metal gear head rotates in 90° steps
Best vibration values in its Class
POWERtronic for enormous power, reserve capacity and extremely uniform speed under load.

Made in Germany for long life and maximum day to day performance
Lightest machine in the market in its class
Locking Switch
Metal dust protection on field in tool armature and electronics to ensure long life
Longest lasting Brushes

It comes as one package with the Holey Galahad already mounted on the Fein grinder, secured by our Universal Nut, with the safety guard adjusted to the correct position and the addition of our Universal wrench.
Fein 4-1/2" Paddle Switch 110v Angle Grinder
Holey Galahad (RCB) Round Coarse Blue
KAT Universal Nut & Wrench
Fein Support Flange, 2 pin hole nut & 2-pin spanner wrench

Next-Generation Brushless PowerDrive Motor: The CCG 18-125 BL Cordless Angle Grinder is equipped with a state-of-the-art brushless motor, ensuring unparalleled service life and performance, even in the most demanding conditions.
Dust-Resistant Design for Enhanced Longevity - With a completely enclosed motor housing, this grinder is specially designed to resist aggressive ceramic and mineral dusts, prolonging the tool's lifespan and maintaining peak efficiency.
Versatile Speed Range for Precision Work - Offering a no-load speed range of 2500-8500 RPM, this grinder allows precise control for a variety of cutting, grinding, and deburring tasks, ensuring optimal results on every project.
Ergonomic …