Car Subwoofers

polypropylene cone with diamond array pattern and rubber surround
5/8" MDF construction with 3/4" MDF baffle board
power handling: 300 watts RMS (2000 watts peak)

10" Oversized Cone Subwoofer
Peak Power 1300W
Low Profile Sealed Down-Firing Design

Max Power: 1000W
RMS POWER OUTPUT (4Ω): 300W
Speaker Level Input / Signal Sensing Turn-On
Variable Low Pass Filter / Bass Boost
KENWOOD P-W3041S: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, Computer-optimized damper controls stress and increases mechanical durability,

Max Power: 1000W
RMS POWER OUTPUT (4Ω): 300W
Speaker Level Input / Signal Sensing Turn-On
Variable Low Pass Filter / Bass Boost
KENWOOD P-W3021D: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, Computer-optimized damper controls stress and increases mechanical durability, the port’s rounded shape reduces airflow resistance and noise generation.

Features MAX Power 160W Wired Remote Controller ACTIVE EQ TECHNOLOGY Switch Class D Amplifier Dimensions (W x H x D): 11.02" x 2.75" x 7.87" Compact Design Allows for installation almost anywhere, including tight spaces such as under a seat or panel. Remote Control Sound Adjustment Included remote control allows for adjustment of volume, Active EQ, Frequency, and phase switch. Active EQ Technology The KSC-PSW7EQ is equipped with Active EQ technology providing three types of bass (Heavy, Flat, and Tight) to match the music of various genres. New Diaphragm Speaker The KSC-PSW7EQ is equipped with a micro-step shape on the long edge of the diaphragm surrounding the diaphragm. This suppresses the …

KENWOOD 12" 4 OHM 1000W TYPHOON WOOFER

Designed exclusively for KENWOOD eXcelon Reference series KFC-W2516PS subwoofer
Protects exposed subwoofer from possible damage
Modern design with stylish black finish

oversized polypropylene cone with rubber surround
power handling: 400 watts RMS (2000 watts peak)
top mount depth: 5-5/8"

oversized polypropylene cone with rubber surround
power handling: 400 watts RMS (2000 watts peak)
top mount depth: 5-5/8"

oversized polypropylene cone with rubber surround
power handling: 300 watts RMS (1300 watts peak)
top mount depth: 4-13/16"

oversized polypropylene cone with rubber surround
power handling: 300 watts RMS (1300 watts peak)
top mount depth: 4-13/16"

ribbed polypropylene cone with rubber surround
4-ohm impedance
power handling: 300 watts RMS (900 watts peak power)

Polypropylene cone with "dual area" dustcap
Down-firing design for greater output and more installation flexibility
Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass
The injection-molded Polypropylene cone features a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass

Max Power 1000W
Variable Low Pass Filter
Bass Boost
Optional Wired Remote Ready
Ported enclosure with two 12" subwoofers // wired for 2 ohms total impedance

ported enclosure with two 12" subwoofers // wired for 2 ohms total impedance
polypropylene cone with diamond array pattern // stress controlled spider
5/8" MDF construction with 3/4" MDF baffle // power handling: 600 watts RMS (2000 watts peak)
total impedance: 2 ohms // frequency response: 29-300 Hz
spring-post terminals accommodate up to 8-gauge wire // can be installed as front-, rear-, or down-firing, grilles included

Bundle Includes: Kenwood P-XW1221DHP Dual 12" Vented Enclosure, 1000W RMS Power, Kenwood X502-1 eXcelon Class D Mono Power Amp, 500Wx1 @ 2 ohms, Creative Audio Coozy, and one 4-piece set of plastic pry tools
Peak Power: 2000W
RMS Power: 1000W
Frequency Response: 29-300Hz
Impedance: 2 Ohms

The Kenwood Excelon P-XW1221DHP ported subwoofer enclosure features 2 heavy-duty 12" drivers, internally wired for a 2Ω output, that can handle 1000W RMS with peak power up to 2000W.
The injection-molded Polypropylene cones feature a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass.
Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.
The P-XW1221DHP is constructed of 5/8" thick MDF (Medium Density Fiberboard) with a 3/4" thick baffle, providing outstanding strength and durability for maintaining ti…

Subwoofers are one of the most important pieces of the sound quality puzzle. eXcelon oversized woofers provide quick response and offer stable and powerful bass that remains true to the original recording.
Subwoofer development requires a diligent testing process including an anechoic chamber, power testing facility and the most advanced desktop applications for design and simulation. These high standards allow KENWOOD eXcelon speakers to deliver their expected performance and have long term reliability so your music can be enjoyed for many years.
Durable 3/4" MDF and sealed wedge enclosure design adds rich and strong bass to your sound system.
By adopting a "Stress-free Spider" and a "Thermal …

Subwoofers are one of the most important pieces of the sound quality puzzle. eXcelon oversized woofers provide quick response and offer stable and powerful bass that remains true to the original recording.
Subwoofer development requires a diligent testing process including an anechoic chamber, power testing facility and the most advanced desktop applications for design and simulation. These high standards allow KENWOOD eXcelon speakers to deliver their expected performance and have long term reliability so your music can be enjoyed for many years.
Durable 3/4" MDF and sealed wedge enclosure design adds rich and strong bass to your sound system.
Low frequency output is increased because of …

2-piece polypropylene cone with rubber surround
power handling: 500 watts RMS (2000 watts peak)
mounting depth: 5-11/16"

2-piece polypropylene cone with rubber surround
power handling: 300 watts RMS (2000 watts peak)
top-mount depth: 5-3/8"

2-piece polypropylene cone with rubber surround
power handling: 500 watts RMS (2000 watts peak)
mounting depth: 5-11/16"

carbon-glass fiber cone with butyl rubber surround
power handling: 350 watts RMS (1400 watts peak)
mounting depth: 3-15/16"

2-piece polypropylene cone with rubber surround
power handling: 300 watts RMS (1300 watts peak)
top-mount depth: 4-7/8"