Car Subwoofers Kenwood

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2".

Features: 1O or 2O ohm selectable impedance, RMS: 1500 watts, Peak: 3000 watts, 3.5 inch aluminum triple voice coil
Vented cast aluminum basket, Double stitched rubber surround, DVVC Direct Vent Voice Coil Cooling, 250 oz magnet, Light weight Polypropelyne dustcap
Reinforced spider, Folded surround for increased excursion without sacrificing effective surface area, Sensor: 83 dB, Magnet: 250 oz, Depth: 8.58 inch

Superior Voice Coil Assembly. New voice coil former design strengthens and improves assembly precision.

10” Single 4Ω Marine/Motorsports Subwoofer with White Grille
IPX6 Water Resistant Subwoofer
ASTM B117 Salt Spray/Salt Fog Tested, ASTM G154 UV Resistant Cone & Grille
21-Color Illumination with RF Remote
1,300 Watt MAX Power Handling

10" Motorsports Subwoofer
Black grill and frame
21 Color RGB lighting and remote controller
free-Air/Infinite baffle design
300 Watt RMS Power

Max Power 1000W
Variable Low Pass Filter
Bass Boost
Optional Wired Remote Ready
The KENWOOD Excelon P-XW1221S ported subwoofer enclosure features a single heavy-duty 2Ω, 12" driver that can handle 500W RMS with peak power up to 2000W.

Max Power 1000W
Variable Low Pass Filter
Bass Boost
Optional Wired Remote Ready
The Kenwood Excelon P-XW1241S ported subwoofer enclosure features a single heavy-duty 4Ω, 12" driver that can handle 300W RMS with peak power up to 2000W.

Max Power 1000W
Variable Low Pass Filter
Bass Boost
Optional Wired Remote Ready

The CA-101G is a 10" Steel Mesh Grille
The stamped steel mesh grille helps protect the speakers from damage.
Subwoofer grille gives your installation a finished look.
For use with Kenwood's KFC-XW1041 or KFC-XW2541 subwoofers.
Dimensions: Diameter: 10.4" , Height: 1.3"

The CA-121G is a 12" Steel Mesh Grille
The stamped steel mesh grille helps protect the speakers from damage.
Subwoofer grille gives your installation a finished look.
For use with Kenwood's KFC-W3041, KFC-XW1241HP, KFC-XW1221HP, or KFC-XW1241 subwoofers.
Dimensions: Diameter: 12.4" , Height: 1.6"

polypropylene cone with diamond array pattern and rubber surround
5/8" MDF construction with 3/4" MDF baffle board
power handling: 300 watts RMS (2000 watts peak)

10" Oversized Cone Subwoofer
Peak Power 1300W
Low Profile Sealed Down-Firing Design

Power handling:
300 watts RMS
900 watts max
Voice coil: single 4 ohm
Cta 2031 Certified so you know wattage ratings aren't inflated

Max Power: 1000W
RMS POWER OUTPUT (4Ω): 300W
Speaker Level Input / Signal Sensing Turn-On
Variable Low Pass Filter / Bass Boost
KENWOOD P-W3041S: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, Computer-optimized damper controls stress and increases mechanical durability,

Max Power: 1000W
RMS POWER OUTPUT (4Ω): 300W
Speaker Level Input / Signal Sensing Turn-On
Variable Low Pass Filter / Bass Boost
KENWOOD P-W3021D: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, Computer-optimized damper controls stress and increases mechanical durability, the port’s rounded shape reduces airflow resistance and noise generation.

POWER: 160 Watts Built-In Class D Max Power
SOUND QUALITY: Active EQ has 3 types of bass to match your music genre. Heavy, Flat and Tight. Custom adjust the bass to your music
REMOTE CONTROL: Included wired remote control for precise sound adjustment from your seat
COMPACT DESIGN: Allows for installation almost anywhere, including tight spaces such as under a seat or panel
DIMENSIONS: 11 x 2-3/4 x 7-7/8 Inches

Designed exclusively for KENWOOD eXcelon Reference series KFC-W3016PS subwoofer
Protects exposed subwoofer from possible damage
Modern design with stylish black finish