Turntables

486259300

485389000

Tubular condenser microphone, Transmission range: 20Hz - 18kHz, Richter characteristic: Cardioid

wall mount surface for Rega turntables increases isolation, eliminates noise + vibration lightweight laser-cut folded aluminum construction works with all Rega turntables except RP6, RP8, and RP10 (these require screw-in adaptors, sold separately) dimensions: 8" x 14" x 16"

Rega Clear Dust Cover for P1, P2, RP1 Turntables

The same turntable as the Rega Planar 1 but this one is upcycled with a blemish or nick on the plinth. 33 1/3 & 45 The upcycled eco turntables get the same full manufacturers warranty Hand-made RB110 tonearm with a factory-fitted Rega Carbon cartridge. Motor: 24 V low-noise motor

Advanced Turntable Power Supply for Rega Turntables, Electronic Speed Change 33.33 RPM- 45 RPM, Fine Motor Control, Vibration reduction, Electronic Fine Speed Adjustment. Suitable for P3-24 / RP3 / Planar 3 2016 / RP6 / P5 / P7 / RP40 special edition / RP8 Or any older Rega turntable fitted with Rega’s aftermarket 24v motor upgrade kit. Produces a perfect sinusoidal waveform to drive a 24v motor Built upon a high stability crystal Improves speed stability

RegaNeoHigh-PerformanceTurntableTT-PSUPowerSupplyUpgrade (Open Box)

Dustcover for Rega Planar 8 and Planar 10 turntables. Clear GPPS material. GPPS lid - do not use cleaning fluids, only use a damp clean cloth if necessary.

Output: 6.8 - 7.2mV Stylus: elliptical Fixing: Rega three point fixing Coils: High Spec parallel wound coils Color: Blue

Custom made premium Reference EBLT drive belt. Fitted as standard to all Planar 8 and Planar 10 turntable models from March 8th 2021. The Reference belt is suitable for all Rega turntables but highly recommended for the Planar 6 and any Planar 3 using the Rega Neo TT PSU. Each belt is moulded on REGA's highly accurate custom tooling using a unique secret blend. Once moulded, the belts are cryogenically frozen and barrelled to remove any excess flash in order to create perfect cross sectional roundness which is critical for accurate speed and stability. All Reference belts go through a unique curing process which guarantees the highest achievable level of accuracy.

Rega Replacement Glass Platter: Genuine Rega replacement 10mm thick platter for Planar 2 turntable. This is a great upgrade for the Planar 1, RP1 and P1 turntables, while maintaining stock platter thickness. Also can be used with RP3, P3-24 and P5 turntables. 295mm ≈ diameter x 10mm ≈ thick. 18mm ≈ center hole diameter Rega Wool Turntable Mat (Black): It is now possible to customize the look of your Rega turntable using a variety of new colored mats. The turntable mats are made from 100% wool. They are 2 mm in thickness. Suitable for use with the Rega RP1 P2, P3, RP3, P5, RP6 and P7 turntables. These mats are NOT suitable for use with the P9 turntable.

Audiophile Turntable w/ 9cc Evolution Tonearm True Balanced - Setting us apart from the competition the Pro-Ject X8 evolution turntables are configured for balanced operation X8 Evolution comes equipped with a balanced 5-pin DIN phono output and can be run balanced with either DIN > XLR or DIN > mini XLR phono cables and a balanced phono stage Includes Sumiko Moonstone Cartridge - Exceptionally well-balanced and dimensionally dense the breathtaking dynamics of the Moonstone outperform many comparably priced moving coil cartridges without requiring a huge investment in preamplification Includes Dust Cover

Pro-Ject Wallmount It 5 - Wall Mount Equipment Rack (Walnut)

DAB, DAB+ & FM radio tuner Internet radio with worldwide stations & podcasts 6.3mm (1/4″) headphone jack Auto-plays last station when turned on RCA, coaxial and optical outputs Remote control included Solid aluminum chassis shields RF/EMI Available in silver or black Made in Europe

Balanced XLR inputs & outputs Balanced mini XLR input Continuously variable cartridge loading Precise RIAA equalization Low-noise, low-distortion circuitry MM & MC capable Single-ended RCA inputs & outputs Available in silver or black Available in silver or black Made in Europe

Pro-Ject T2 SuperPhono - High Gloss Black

Tonearm and cartridge completely setup at the Factory for simple installation at home 8mm thick bead-blasted glass platter Premium mechanical parts used throughout for smooth, precise playback of records Precise, electronic selection of 33 1/3 and 45 RPM playback Speed Built-in, bypassable phono preamp for connection to any audio system

Reduces unwanted resonances & improves playback of warped records. Ensures a firm fit between the record and the turntable Functional, elegant with a nickel finish. The label is protected by the felt pad on the underside. Check your spindle height: The spindle height with the record placed on it must not exceed 10.5mm!

Pro-Ject: Leather It Platter Mat - Grey Open Box

Heavy hi-fi isolation platform, finished in a high-gloss piano (black) lacquer Sits on four conical spiked feet with special damping rings Acts as a support platform for many turntables, but can also work with CD players and other hi-fi equipment Dimensions: 480 x 27 x 390mm | Weight: 4.1kg

A silent running AC motor with two-step metal pulley drives the hub and platter via a flat-ground belt Medium density fiber plinth uses four shock absorbing feet Drive motor is decoupled from the plinth to reduce vibration transmission The nearly three pound sheet-steel sandwiched platter provides excellent speed stability and protects records with a felt mat External power supply reduces the chance of electro-mechanical interference

8.6″ acrylic tonearm with pre-adjusted Pick it PRO Special Edition cartridge Prism plinth design made of MDF (28mm thick) Dimmable LED rainbow backlight Precision belt drive with electronic speed control - 33/45rpm (manual belt change) Semi-symmetrical phono cable included Gold-plated RCA connectors Heavy glass record platter (10mm thick) with Precision aluminum sub-platter Handmade in Europe