Card Readers & USB Hubs

Part Number: 934752-001 MPN: 934752-001 Type: Cable Card Reader Compatible With HP Omen 15 CE018DX This item will be shipped exactly as shown in the pictures.

Part Number: 9WK02 MPN: 9WK02 CN-9WK02 09WK02 TVNRV 17B85-1 Type: Circuit Board Includes Ports : USB SD Card Reader Compatible With Laptop Dell Inspiron 14 (5481) 2-in-1 9WK02 09WK02 This item will be shipped exactly as shown in the picture

Apple MFI Certified Product Transfer photos, videos, and data from your iPhone, iPad, iPod directly to a Micro SD without a computer Eliminates lack of capacity for idevices Support high speed transfer up to 128GB Micro SD Easily edit data with the exclusive J5 Create Creative Drive app

Ideal for Small Offices, Home Offices, and home users Simple Plug & Play Installation Flexible design for desktop or wall mounted Flexible Cabling with 8 UTP and 1 BNC Ports Free Lifetime Customer Support and Warrenty

This item has been discontinued and is no longer available

Connect up to 4 USB peripherals or devices to a USB-ready PC or iMac Provides an out-of-the-box industry-standard bus Seamless connections Low and high speeds supported with data buffering Diagnostic LEDs provide the user with power state and port status

Item Package Dimension: 9.7L x 6.8W x 2.6H inches Item Package Weight - 2.0 Pounds Item Package Quantity - 1 Product Type - COMPUTER COMPONENT

Uses 802.3az Energy Efficient Ethernet to reduce power usage automatically without sacrificing performance Stylish, compact design allows you to place the switch in any convenient location with the ports tucked away at the rear With data transfer speeds of up to 200 Mbps at full duplex, these switches are ideal for quick file transfers, online gaming and smooth streaming media Innovative D-Link Green energy saving features. Compact design for convenient placement Fanless design for silent operation. 8 high-speed Fast Ethernet ports

Item Package Dimension: 9.9L x 8.5W x 5.4H inches Item Package Weight - 3.25 Pounds Item Package Quantity - 1 Product Type - NETWORK INTERFACE CONTROLLER ADAPTER

Compact design ideal for travel 4 downstream ports to connect more devices to your computer High Speed Mini USB 2.0 for fast data transfers - up to 40x faster than USB 1.1 Plug and play connectivity Instantly add more USB 2.0 ports to your computer 4 fast charging ports give your mobile devices a boost in power Works with USB 1.1 Devices 5V/2.5A Power Adapter

PoE splitters are always used if a surveillance camera, access point or other device is only to be powered through the data line, but the device is not compatible with PoE technology. The input network and PoE signals through the LAN cable are separated from the splitter and the PoE signal is output separately from the network signal through the DC connector. While only the Ethernet signal is still present on the RJ45 socket, the PoE signal can be output in steps of 5, 9 or 12 volts through a separate socket. Current changes as follows depending on the selected level: 2 amps at 5 volts / 2 amps at 9 volts / 2 amps at 12 volts. The PoE splitter complies with Gigabit Ethernet standard up to …

Automatically detects the appropriate transfer rate (10/100/1000Mbps) Plug & Play - no additional installation required Expand your network with eight more ports Quiet, fanless design

With the USB LAN extender, you can connect perepheral devices with a USB port even over longer ranges of up to 50 m to your main devices, such as PC, router or Raspberry Pi. The integrated reception amplifier reduces the signal loss that may occur at long distances via UTP, STP or S-FTP cable. As no special software is required to operate the extender set, installation is correspondingly simple. For a clean data transfer, network patch cables or installation cables from type CAT5 to CAT-7A can be used with or without shielding.

Digitus USB Hub 3-Port C to 3x DP with Cable

USB 3.0 Male to CF Slot Card Reader Aluminum case CF Card Type I / II, Extreme IV and Microdrive Cards Supports CF cards in PIO, MDA, and UDMA modes Data Transfer Rate: Up to 5GB/s External Dimensions (L x W x H): Approx. 3.2 x 2.4 x 0.5 inches (82 x 60 x 12 mm)

Delock 3 Port USB 3.2 Gen 1 Hub + Gigabit LAN

Delock SuperSpeed USB Card Reader for SD / Micro SD / MS Memory Cards

Package dimensions (L x W x H): 8.0 cm x 13.0 cm x 1.4 cm Package weight: 99.88 g No assembly required Number of pack: 1

This card reader by Delock has two memory card slots and allows you to read and write different SD, MMC and Micro SD memory cards Connectors: 1 x USB 2.0 Type-A male >, 1 x SD/MMC slot, 1 x Micro SD slot. Chipset: Moai M8168. data transfer rate up to 480 Mbps 1 x LED display. hot swap, plug and play. dimensions (L x W x H): approx. 60 x 22 x 11 mm Slot 1: SD, SD3.0 UHS-I, SD4.0 UHS-II, SD High Capacity (SDHC), SD High Speed, SDXC, Turbo-SD,Turbo Mini SD*, Mini SD*, MMC-I, MMC-II, MMC Plus, MMC Dual Voltage, RS-MMC*, RS-MMC Dual Voltage*, RS-MMC4.0* Slot 2: Micro SD, Micro SD3.0 UHS-I, Micro SD4.0 UHS-II, Micro SDHC, Micro SDXC, T-Flash, MMC Mobile, MMC micro (*Adapter required)

Colour: black Package dimensions (L x W x H): 28.7 x 55.2 x 9.2 mm

91624