Card Readers & USB Hubs

Compact design ideal for travel 4 downstream ports to connect more devices to your computer High Speed Mini USB 2.0 for fast data transfers - up to 40x faster than USB 1.1 Plug and play connectivity Instantly add more USB 2.0 ports to your computer 4 fast charging ports give your mobile devices a boost in power Works with USB 1.1 Devices 5V/2.5A Power Adapter

Network connection: 5 x RJ-45 10/100/1000M auto-negotiation, 1 x RJ-45 10/100/1000M with IEEE802.3bt In, 4 x RJ-45 10/100/1000M with IEEE802.3at Out Switch architecture: Backplane (switching fabric): 10Gbps Data Processing: Save and Transmission Flow control: IEEE 802.3x flow and back pressure control IEEE Standard: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast Ethernet, IEEE 802.3ab 1000Base-T Gigabit Ethernet, IEEE 802.3x Flow Control and Backpressure, IEEE 802.3af PoE, IEEE 802.3at PoE E+, IEEE 802.3bt PoE++

Automatically detects the appropriate transfer rate (10/100/1000Mbps) Plug & Play - no additional installation required Expand your network with eight more ports Quiet, fanless design

With the USB LAN extender, you can connect perepheral devices with a USB port even over longer ranges of up to 50 m to your main devices, such as PC, router or Raspberry Pi. The integrated reception amplifier reduces the signal loss that may occur at long distances via UTP, STP or S-FTP cable. As no special software is required to operate the extender set, installation is correspondingly simple. For a clean data transfer, network patch cables or installation cables from type CAT5 to CAT-7A can be used with or without shielding.

Digitus USB Hub 3-Port C to 3x DP with Cable

Includes wall enclosure, 9U, 464 x 312 x 300 mm (DN-10-09U-B) Includes shelf, 1U (DN-10-TRAY-1-B) Includes power strip, 1U, 3x earthing contact (DN-95411) Includes Gigabit Ethernet Switch, 8-port (DN-80114) Includes CAT 6, Class E, patch panel, 8-port, shielded (DN-91608S)

USB 3.0 Male to CF Slot Card Reader Aluminum case CF Card Type I / II, Extreme IV and Microdrive Cards Supports CF cards in PIO, MDA, and UDMA modes Data Transfer Rate: Up to 5GB/s External Dimensions (L x W x H): Approx. 3.2 x 2.4 x 0.5 inches (82 x 60 x 12 mm)

Delock 3 Port USB 3.2 Gen 1 Hub + Gigabit LAN

Delock SuperSpeed USB Card Reader for SD / Micro SD / MS Memory Cards

Package dimensions (L x W x H): 8.0 cm x 13.0 cm x 1.4 cm Package weight: 99.88 g No assembly required Number of pack: 1

This card reader by Delock has two memory card slots and allows you to read and write different SD, MMC and Micro SD memory cards Connectors: 1 x USB 2.0 Type-A male >, 1 x SD/MMC slot, 1 x Micro SD slot. Chipset: Moai M8168. data transfer rate up to 480 Mbps 1 x LED display. hot swap, plug and play. dimensions (L x W x H): approx. 60 x 22 x 11 mm Slot 1: SD, SD3.0 UHS-I, SD4.0 UHS-II, SD High Capacity (SDHC), SD High Speed, SDXC, Turbo-SD,Turbo Mini SD*, Mini SD*, MMC-I, MMC-II, MMC Plus, MMC Dual Voltage, RS-MMC*, RS-MMC Dual Voltage*, RS-MMC4.0* Slot 2: Micro SD, Micro SD3.0 UHS-I, Micro SD4.0 UHS-II, Micro SDHC, Micro SDXC, T-Flash, MMC Mobile, MMC micro (*Adapter required)

Colour: black Package dimensions (L x W x H): 28.7 x 55.2 x 9.2 mm

91624

91655 Item Package Quantity: 1 Model Number: 91655 Package Weight: 18.14 grams

Aluminum case Interface: 1 x FireWire 800 1394B, 1 x CF Card Slot Support CF Card Type I/ II, Extreme IV, Micro Drive Memory Card Supports CF cards in PIO, DMA, and UDMA modes Data Transfer Rate: Up to 800MB/s External Dimensions (L x W x H): Approx. 3.2 x 2.4 x 0.5 inches (82 x 60 x 12 mm) Hot Swapping, Plug & Play

Interface: ExpressCard/34 / Type: Adapter/OS: Windows

61795

CF Type I Supports the following memory cards, WiFi or standards: SD, SDHC, SDXC, mini SD*, mini SDHC*, micro SDHC*, micro SDXC*, T-Flash* File system FAT / FAT32 / exFAT / NTFS

0KPYGK

0W5VM7