Welders

The MST 220i is also Spool Gun capable for Aluminum MIG welding.

Maximum Output: 180 Amp. MIG: 180A/23V at 20% Duty Cycle. 145A/22.5V at 30% Duty Cycle
Stick: 175A/27V at 20% Duty Cycle. 140A/25.6V at 30% Duty Cycle. TIG 175A/17V at 25%. 160A/16.4V at 30%.
MIG Voltage Range: 10-25V. Normal OCV Volt DC: 62V. Maximum Plate Thickness: 1/4"
Warranty: 3 Yr. Limited. Primary Voltage: 208/230VAC. Supply Voltage Range: 208-265VAC. Single Phase. Supply Frequency: 50/60Hz
Supply Plug: NEMA 6-50P. Rated kVA: 9kVA at 180Amp. Lead Cord Length: 10 ft. Maximum Output Current: 37 Amp

Kit includes everything to get you started right-away. Kit includes: FP135 MIG Welder| Auto-Darkening Helmet | MIG Welder Cart| Chipping Hammer| Wire Brush |Regulator
Operates from standard 115V household outle
Delivers up to 135 Amps
FCAW 90A / 18V @ 40% Duty Cycle

FP-135 MIG/Flux-Cored Welder delivers a versatile and effective welding performance.
Operates from standard 115V household outlet
Delivers up to 135 Amps
Simple operation and easy to use key set up chart
FCAW 90A / 18V @ 40% Duty Cycle

TIG accessory kit comes with all Parts necessary for a TIG torch
Contents: collets 3/32" & 1/8", collet bodies 3/32" & 1/8", cup aluminas #6 & #7, tungsten ceriated 3/32" and 1/8"
Gas service: argon
Current: AC/DC

50 mm dinse connector
12' lead length. Includes set of accessories
Designed for tig 140 acdc & tig 200 acdc
country of origin:China

50 mm dinse connector with 25 mm dinse adaptor
12' lead length, and includes set of Accessories
3 collets, 2 collet bodies, 2 cup aluminas, 2 tungsten electrodes, and a short and long back cap
Designed for use with mst 140i, mst 180i and mst 220i
Accessories included: collets 040" 7 1/16". collet bodies 040" & 1/16". cup aluminas # 4& 5. tungsten ceriated 040" & 1/16"

Designed for use with MST 140i, MST 180i and Fabricator 141i, 181i
DC only with 200 Max Amp output
2 collets, 2 collet bodies, 2 cup aluminas, 2 tungsten electrodes, and a short and long back cap
50 mm Dinse Connector (25 mm Dinse Adaptor on 1442-0020 for MST 140i)
Accessories included: collets 040" 7 1/16". collet bodies 040" & 1/16". cup aluminas # 4& 5. tungsten ceriated 040" & 1/16"

Used to control Gas flow
Suitable for specific welding applications
For use with thermal arc 95 S, 161 S and 201 TS stick/TIG welding torches
Made from high quality nonconductive pink ceramic material
Tolerates high temperatures

product type :MECHANICAL COMPONENTS
country of origin:United States
package weight : 1.0lbs
Unit count: 1.0

Product Type :Mechanical Components
Package Quantity :1
Country Of Origin :United States
Package Weight :1.0Lbs

Standard features include: high frequency start, lift arc tig start, automatic downslope, pulse, repeat (latch) function, memory function and automatic gas management
Embedded microprocessor with digital controls
Hf tig and lift arc tig start with rapid pulse output
Tiptronic memory functions
Robust aluminum metal case

Advanced control over arc parameters, including adjustable Arc Force, to optimize the arc - especially with 6010 electrodes
Impressive power output of 150A at 60% duty cycle
Thermal protection for the welder and generator guaranteeing a long, useful life
Latest inverter technology ensures a stable and smooth stick arc that produces the cleanest welds
Trusted Kohler gas engine meets a high standard of power and reliability
Fuel-efficient 5-gallon gas tank and engine hour meter
Four 120 VAC, 20A GFCI receptacle, all protected by a circuit breaker and covers
Auxiliary generator output voltage is independent from the welding current, allowing simultaneous use of electrical tools without worrying …

Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
With ESAB’s new 4 Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in.(1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.…

True All-Process - excellent performance on MIG, Flux-Cored, STICK (including 6010 electrodes), DC TIG and AC TIG industrial applications
Professional TIG features such as High Frequency start in DC and AC modes, balance adjustment, frequency adjustment and Pulse DC.
sMIG Technology - exclusive sMIG ("smart MIG") feature continuously learns and adapts to the operator’s welding technique to provide a stable arc and superior, repeatable welds. increases productivity for the experienced welder, and reduces training time for novice welders
Unmatched Portability and Durability weighing in at only 49 lbs. (22 kg), Rebel EMP 205ic AC/DC with 5 handle roll cage can tackle any job around the shop or…

Standard features include: high frequency start, lift arc tig start, automatic downslope, pulse, repeat (latch) function, memory function and automatic gas management
Embedded microprocessor with digital controls
Hf tig and lift arc tig start with rapid pulse output
Tiptronic memory functions
Robust aluminum metal case

Standard features include: high frequency start, lift arc tig start, automatic downslope, pulse, repeat (latch) function, memory function and automatic gas management
Embedded microprocessor with digital controls
Hf tig and lift arc tig start with rapid pulse output
Tiptronic memory functions
Robust aluminum metal case

Power to Perform – with 285A @ 40% (1ph model) and 285A @ 50% (3ph model) you’ll have the confidence to run the full range of .045 in. (1.2 mm) wire, short arc and spray transfer, with increased deposition rates and higher productivity on smaller diameter wires such as .030 in. (0.8 mm) and .035 in. (0.9 mm).
sMIG Technology – innovative “smart-MIG” feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter and plate thickness and you are ready to weld.
With ESAB’s new 4 Roll Drive System, weld up to .052 in. (1.4 mm) solid wire and up to 1/16 in.(1.6 mm) cored wire. Plus, electrodes up to 5/32 in. (4.…

Series- Outback 145
Start type- Recoil
Amperage range: 50-145
Peak auxiliary power- 4750W
Continuous auxiliary power- 4250W

Occupational Health & Safety
Country of Manifacturer: United States
Manufacturer: Lincoln Electric

Drive Roll/Guide Tube Kit for use in welding
Used for feeding 0.045 - 0.052" (1.2 - 1.3 mm) cored wire
Weight - 2 pounds

Includes: Magnum SG Control module
For use with: CV Power Sources and CV Engine Drives with output contactor
Provides control of wire speed and gas flow

Application - industrial production, maintenance and repair, shop/farm, welding education
Dimensions: overall height - top to bottom: 27". overall width - side to side: 19". overall depth - front to back: 21.5"
Series: Idealarc