Computer Cases

Aluminum Sand Blasting appearance design Entire Coating black internally design Compatible with 280 mm VGA card Supports to max. 135mm height CPU cooler Type C*1 + USB3.0*1 All Magnetic dust filters Supports to install 2×2.5'HDD + 2×3.5'HDD Option to install 200mm×1 or 1×12025 or 1×14025 fan at front Option to install 1×120 fan at bottom, and 2×9025 at rear Option to install 200mm or 120mm or 140mm radiator at front Mesh front panel for Ultra high air flow design Compatible with ATX POWER SUPPLY

Samco UFOII White Case with 120mm RGB Case Fan With 1 Year Warranty

Steel / Tempered Glass ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / HD Audio In/Out Front Ports 3 x 120mm ARGB LED fan x front (Pre-installed), 1 x 120mm ARGB LED fan x rear(pre-installed) provide great cooling and dynamic cyber gaming atmosphere 2 ways to control RGB LED strip/fan lighting: Either by Manual RGB LED Button on Top I/O Panel; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/your motherboard to control ARGB lighting Water cooling

Water cooling ready - Top, MB side and Front can fit up to 360mm water cooling radiator Front/Top/Left and Right side panel too-free disassembling structure - provide fast installation with no hassle Bottom mounted IO ports - 2x USB 3.0 and 1x Type C for up-to-date high speed data transfer Advanced cable management design - 32mm Advanced bottom-mounted power supply design Magnetic dust filter at top / bottom - easy clean Support up to 180mm CPU cooler Support up to 400mm VGA card. Horizontally o

Steel / Tempered Glass ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / Audio In & Out (HD) Front Ports 1 x Halo LED Ring fans x rear (Pre-installed) Water cooling ready - Front can fit up to 280mm water cooling radiator Advanced cable management design Support up to 320mm VGA card

Steel ATX Mid Tower 2 x USB 2.0 / 1 x USB 3.0 / HD Audio Front Ports 3 x 120mm Fans (Pre-Installed)

Water cooling ready - front can fit up to 360mm water cooling radiator Advanced cable management design-25mm Advanced bottom-mounted power supply design Top mounted IO ports - USB 3.0 for up-to-date high speed data transfer 6 fans capability provide great cooling performance Magnetic dust filter at top - easy clean Support up to 162mm CPU cooler Support up to 330mm VGA card

Metal Mesh Panel ,Micro ATX mid-Tower Computer Case Supports micro ATX and mini-ITX motherboards, 1 * 120mm silent fan pre-installed USB3.0*2, HD AUDIO, TYPE C*1 The front panel, top panel, side panel, and bottom plate are all designed with snap fasteners for disassembly and assembly,buckle design Adjustable PSU location Maximum support for 166mm air-cooled and 280mm water-cooled radiators

Metal Mesh Panel ,Micro ATX mid-Tower Computer Case Supports micro ATX and mini-ITX motherboards, 1 * 120mm silent fan pre-installed USB3.0*2, HD AUDIO, TYPE C*1 The front panel, top panel, side panel, and bottom plate are all designed with snap fasteners for disassembly and assembly,buckle design Adjustable PSU location Maximum support for 166mm air-cooled and 280mm water-cooled radiators

Tempered glass side panel x 4mm thickness not only offers great protection, but also provides wide angle for optimized visualization while the system is running 7 fans capability (3 x ARGB LED fans x front, 1 x ARGB LED fan x rear pre-installed ) provide great cooling and dynamic cyber gaming atmosphere 2 ways to control ARGB LED fan lighting: either by manual ARGB LED button on top panel; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/you

Sleek Front Panel with Power On Button 5x 3.5' Hotswap Bays 4mm Aluminum Front Panel Support 6.0Gb/s SATA/SAS HDDs Compatible with Flex Power Supply Heavy Duty SECC Construction

Wall-mount open frame rack stores 12U of 19-inch rack equipment up to 22 inches deep and swings open for maximum accessibility. 12U 2-post rack accommodates 19 in. rack equipment up to 22 in. deep. Hinged front provides easy rear access to cables and equipment Keyhole mounting slots are spaced 16 in. apart to match standard wall stud placement Maximum load capacity is 150 lb. Assembly hardware is included

Superserver Sys-7047R-72Rft Dual Lga2011 920W 4U Rackmount/Tower.

Roomy Chassis: This 2U server case has 4 internal 3.5' HDD bays plus 2 additional 2.5' devices. Expandable & E-ATX Compatible: 7 PCI expansion slots and E-ATX (12 x 13in) compatibility gives you options for expansion. Quiet Cooling: 3 pre-installed 80mm cooling fans at center provide excellent airflow and heat protection at reduced noise. Desired Features: Front panel LED indicators for power, HDD, and LAN status monitoring allow quick, easy visual assessment. Additional utility with 1 USB 3.0 a

Spacious Chassis: This massive 4U server case has 7 internal 3.5' HDD bays plus room for 2 additional 5.25' devices. Expandable & ATX/CEB Compatible: 7 PCI expansion slots and ATX and CEB motherboard compatibility give you growth options for all of your needs. Quiet Cooling: 3 pre-installed cooling fans provide excellent airflow and heat protection at reduced noise. 1 front 120mm fan and 2 rear 80mm fans ensure your drives and chassis avoid overheating. Desired Features: Front panel LED indicato

Spacious Chassis: This huge 4U server case comes with 15 internal 3.5' HDD & 5 2.5" SSD bays. Expandable & E-ATX Compatible: 7 PCI expansion slots and E-ATX compatibility gives you growth options for all of your needs. Exceptional Cooling: 5 pre-installed cooling fans provide excellent airflow and heat protection. Support 360mm AIO liquid CPU cooler Desired Features: Front panel LED indicators for power, HDD status monitoring allow quick, easy visual assessment. Additional utility with 2 USB 3.0

SC SAPPHIRE EN

3 External 5.25' Drive Bays 1 120mm Fans

3 External 5.25' Drive Bays 1 120mm Fans

3 External 5.25' Drive Bays Rear: 2 x 80 mm (Option) 80mm Fans Front: 1 x 120 mm (120 x 25 mm), PWM 120mm Fans

1 External 5.25' Drive Bays 1 80mm Fans

Backplane support for 8 port SAS / SATA drives and 12 Gb/s Mini-SAS HD SFF-8643 + SGPIO Supports eight 2.5'/3.5' SAS/SATA HDD/SSD hot-swap trays Includes three 80mm x 38mm hot-swappable PWM fans Independent drive status LED Supports E-ATX or SSI-EEB motherboards Supports seven low profile PCI / PCIe slots Auto lock handle designed to easily fit and secure into server racks