Computer Cases

USB2.0/Firewire/e-SATA Combo Internal HUB Panel

*Case contains 185mm pcie 3.0 Riser cable*1. *If a standalone graphics card is not required, it can be used directly. 1.6KG lightweight body, meeting all kinds of installation needs Compatible with dual-slot graphics cards up to 300mm in length 60mm height CPU cooler 2.5 inch SSD hard drive and SFX power supply. Size: 12.2*5.1*7.5 inches. Require GPU Riser cable to install Video Card.

*Case contains 185mm pcie 3.0 Riser cable*1. *If a standalone graphics card is not required, it can be used directly. 1.6KG lightweight body, meeting all kinds of installation needs Compatible with dual-slot graphics cards up to 300mm in length 60mm height CPU cooler 2.5 inch SSD hard drive and SFX power supply. Size: 12.2*5.1*7.5 inches. Require GPU Riser cable to install Video Card.

*Case contains 185mm pcie 3.0 Riser cable*1. *If a standalone graphics card is not required, it can be used directly. 1.6KG lightweight body, meeting all kinds of installation needs Compatible with dual-slot graphics cards up to 300mm in length 60mm height CPU cooler 2.5 inch SSD hard drive and SFX power supply. Size: 12.2*5.1*7.5 inches. Require GPU Riser cable to install Video Card.

*Free 120mm*6 RGB white fans. *Double sided glass sidelight with no riser design. *Block design for quick disassembly. *400mm graphics card support. *175mm CPU cooling support. *2*HDD,2*SSD

*Free 120mm*6 RGB white fans. *Double sided glass sidelight with no riser design. *Block design for quick disassembly. *400mm graphics card support. *175mm CPU cooling support. *2*HDD,2*SSD

IP-Control - Easily control any compatible IP camera Po E Enabled - Single cable installation Simple to Use - Logical layout allows anyone to take control with minimal training Variable Speed - Adjust PTZ speed to get the perfect shot every time Four Control Modes - IP VISCA, ONVIF, RS422, and RS232 Integrated LCD Screen - Review settings at a glance

Universal 4- Slots Vertical GPU Kit (with Gen 4 riser) - For Full Tower / ATX Mid-TowerSupports up to 4 slots GPU at vertical mounting position to show off in most of LIAN LI cases. Includes a PCIe 4.0 riser cable for seamless connectivity.Compatible with ATX CasesThe kit suits most of the ATX cases, including an O11 Dynamic EVO, O11 Dynamic, O11 Dynamic XL, LANCOOL III, LANCOOL II, LANCOOL 215, and Odyssey X.Gen 4.0 PCIE Riser CableThe PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performance.Enhanced Supporting StructureDesigned with

Universal 4- Slots Vertical GPU Kit (with Gen 4 riser) - For Full Tower / ATX Mid-TowerSupports up to 4 slots GPU at vertical mounting position to show off in most of LIAN LI cases. Includes a PCIe 4.0 riser cable for seamless connectivity.Compatible with ATX CasesThe kit suits most of the ATX cases, including an O11 Dynamic EVO, O11 Dynamic, O11 Dynamic XL, LANCOOL III, LANCOOL II, LANCOOL 215, and Odyssey X.Gen 4.0 PCIE Riser CableThe PCIe 4.0 riser cable supports bit rate speeds of 16GT/s. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offering great performance.Enhanced Supporting StructureDesigned with

8TH GENERATION) - GRAPHITE - CH

Mid Tower Case Cold rolled steel plate (SPCC) Unique side half glass half mesh hollow design Front without any heat dissipation: 335mm(Without front water cooling and fan),The length limit for installing front water cooling is 275mm,The length of the fan before installation is limited to 305mm Front-mounted built-in water cooling Length limit: 275mm Front-mounted built-in fan length limit: 305mm 4 PCI slots The length of the power supply is limited to 200mm (including the module plug) Fan front:

Trendnet Tc-p16c6 16-port Cat.6 19' Rm Patch Pan (tcp16c6)

4U BLACK RACKMOUNT CASE EXTERNAL 5.25 BAY x 3 EXTERNAL 3.5 BAY X 1 INTERNAL 3.5 BAY X 3 ATX MB 12' X 10' 80CM FAN X 2 WASHABLE AIR FILTER

w/ 500W Power Supply 2 External 5.25' Drive Bays

SGCC Tempered Glass E-ATX Vertical Super Tower 4 x USB 3.0 / 1 x Headphone / 1 x Mic Ports Front Ports 1 External 5.25' Drive Bays 6 x 2.5'/3.5' (HDD Cage) with 2 x 2.5' (With HDD Tray) Internal 3.5' Drive Bays

Iconic Vertical Body Design Supports up to a 280mm Radiator Two CT140 PC Cooling Fans Pre-installed Enough internal space to accommodate GPU up to 380mm in length

Iconic Vertical Body Design Supports up to a 280mm Radiator Two CT140 PC Cooling Fans Pre-installed Enough internal space to accommodate GPU up to 380mm in length

JONSBO TK-3 series integrated glass ATX case, separated cabinet case- One-piece Curved Glass: 270 Degree Side View Display,column-less,full display of hardware Separated cabinet case: Support back plane (BTF) motherboard High compatibility: ATX PSU, 40series GPU, BTF MB Cooling system: Support Dual 360 AIO (up/down)/10fan positions (Vertical upward path without heat accumulation) Top Filter Decorative Plate, Bottom dustproof design Specification- Size: 288mm(W) * 438mm(D) * 415mm(H) ( Included t

JONSBO TK-3 series integrated glass ATX case, separated cabinet case- One-piece Curved Glass: 270 Degree Side View Display,column-less,full display of hardware Separated cabinet case: Support back plane (BTF) motherboard High compatibility: ATX PSU, 40series GPU, BTF MB Cooling system: Support Dual 360 AIO (up/down)/10fan positions (Vertical upward path without heat accumulation) Top Filter Decorative Plate, Bottom dustproof design Specification- Size: 288mm(W) * 438mm(D) * 415mm(H) ( Included t

Model: TK-1 Color: Black Dimension: 299mm (W) * 310mm (D) * 345mm (H) Material: 2.5+1mm steel panel Motherboard: ITX / M-ATX Drive Bay: 3.5'HDD*2 or 2.5'SSD*1 / 3.5'HDD*1 Cooling Systerm: Top: 120mm*2; Bottom: 120mm*2 Water Cooling: Top: 240mm*1 Power Supply: ATX220mm CPU Cooler: 165mm Video Card: 280mm Front IO Port: USB3.2 Gen2 Type-C*1 / USB3.0*1 / AUDIO & MIC*1 Expansion Solt: 4 Weight: Net 5.9kg

Model: TK-1 Color: Black Dimension: 299mm (W) * 310mm (D) * 345mm (H) Material: 2.5+1mm steel panel Motherboard: ITX / M-ATX Drive Bay: 3.5'HDD*2 or 2.5'SSD*1 / 3.5'HDD*1 Cooling Systerm: Top: 120mm*2; Bottom: 120mm*2 Water Cooling: Top: 240mm*1 Power Supply: ATX220mm CPU Cooler: 165mm Video Card: 280mm Front IO Port: USB3.2 Gen2 Type-C*1 / USB3.0*1 / AUDIO & MIC*1 Expansion Solt: 4 Weight: Net 5.9kg

The front panel media dashboard is made of durable ABS material and etched on surface. It is stable with high speed and safety. It is anti-rust and hard to be scrapped 2 USB3.0 HUB (HOST), transfer speed up to 5.0Gbps, downward compatible with USB2.0 and USB1.1 built-in PCI-E interface (no need to purchase the USB3.0 PCI-E card), as long as your motherboard has PCI-E interface will be able to your computer in one step to upgrade to USB 3.0

KEYB. CH-2.4GHZ/BT-CENTRAL-SWISS

KEYB. DEU-2.4GHZ/BT-CENTRAL