Computer Cases

Product 1: Solid and Silent: Designed with a Brushed Aluminum look front panel and solid panels Product 1: On the Go Compact Design: Pack in your parts for a compact design offers the perfect fit in small spaces or on the go Product 1: Tool free design: The innovative 2.5”/3.5” tool free drive bay design minimized the hassles of installation/removal Product 1: Covered Power: Supports Full Length Power Supply cover with PSU window Product 2: Delivers 600W Continuous output at plus 40℃. Compliance with Intel ATX 12V 2. 31 and EPS 12V 2. 92 standards Product 2: 80 PLUS Certified – 80% efficiency under typical load. Power good signal is 100-500 millisecond Product 2: Supports (2)

Product 1: Solid and Silent: Designed with a Brushed Aluminum look front panel and solid panels Product 1: On the Go Compact Design: Pack in your parts for a compact design offers the perfect fit in small spaces or on the go Product 1: Tool free design: The innovative 2.5”/3.5” tool free drive bay design minimized the hassles of installation/removal Product 1: Covered Power: Supports Full Length Power Supply cover with PSU window Product 2: Delivers 500 Watt Continuous output at plus 40 degree. Compliance with Intel ATX 12 Volt 2.31 and EPS 12V 2.92 standards Product 2: 80 PLUS Certified, 80 percentage efficiency under typical load Product 2: Supports (2) PCI E 6plus2pin

A Unique View - Horizontal Case Placement Includes A Bottom Cover Panel and A Display Stand Easy Installation Anti-Scratch Rubber Pad Anti-Slip Design

Product 1: Fully Compatible with Intel ATX 3.0 Standards Product 1: PCIe Gen 5.0 Ready Product 1: Made to Comply with the Latest Graphics Cards Product 1: Fully Modular Low-Profile Cables Product 2: CLEAR VIEW: Seamless glass across the front and side panels gives your build’s components the undivided attention they deserve. Product 2: HIGH-PERFORMANCE AIRFLOW: Perforated top and side panels direct filtered air through the case to cool down components and enhance performance. Product 2: DUAL-CHAMBER DESIGN: Cables, storage, and PSU are separate from other components to maintain a clean look and maximize airflow to the GPU. ● SIMPLIFIED BUILDING: Spacious interior with intuitive

Octagonal tower chassis supports up to M-ATX motherboad 2 x 140mm CT Fan included Supports up to 120/140mm fan x 3 or 420mm radiator Horizontal display enabled by optional Chassis Stand Kit (Need to purchase seprately) Compatible Sockets - Intel LGA 2066/2011-3/2011/1700/1200/1156/1155/1151/1150 and AMD AM5/AM4/AM3+/AM3/AM2+/AM2/FM2/FM1 Sync with Motherboard RGB Software : Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. Keep it COLD with Copper : The high-performance copper base plate accelerates heat conductivity. The reliable pump enables maximum water circulation, keeping the copper plate continuously cool. New Design,

I/O panel can be adjusted in 6 different locations and the Case can be positioned: Vertical or horizontal Edge to edge acrylic transparent side panel offers a full view inside Body depth height: Can support normal size ATX power supply Front magnetic design dust filter with open perforated front, top and bottom for high air performance Delivers 600W Continuous output at plus 40℃. Compliance with Intel ATX 12V 2. 31 and EPS 12V 2. 92 standards 80 PLUS Certified – 80% efficiency under typical load. Power good signal is 100-500 millisecond Supports (2) PCI-E 6 plus 2pin Connectors. Active (PFC) Power Factor Correction, MTBF: 100, 000 hours Industry Grade Protections: (OPP) Over Power

Open Frame Panoramic Viewing: 5 millimeter thick tempered glass at front 3 Way Placement Layout: Wall mount, vertical, and horizontal placement Vertical GPU Mounting: * PCI E Riser Cable need to be purchsed seperately Vertical PSU Mounting: Vertical PSU layout when ITX Motherboard is applied Dismountable Modular Design: Freely build the system from the ground up with given modular panels, racks, brackets, and pre design mounting arrays

Support standard-length expansion cards (10 5 inches) Mini-dtx/Mini-ITX motherboard & ATX PSU compatible Support 120mm or 140mm single fan all-in-one liquid cooler Support 2 5" And 3 5" Hard drives Case dimensions: 8.47" (W) x 7.13" (H) x 11.22" (D), 11.5 liters

Compatible with Micro-ATX / Mini-ITX / Mini-DTX motherboard & ATX / SFX / SFX-L PSU Supports high-end graphics / expansion cards of up to 400mm Supports dual 360mm liquid cooling radiators simultaneously Accommodates a maximum total of 11 fans (7 x 120mm + 4 x 80mm) Front I/O port includes USB Type-C x 1, USB 3.0 x 2, combo audio x 1

Supports 3 slot full length graphics cards with adjustable graphics card holder Compatible with Mini-DTX / Mini-ITX motherboard & ATX PSU. Supports up to 240mm radiators Modular design with 4 removable captive thumbscrew panels (top, left, right, bottom) Different configurations support various storage components for 5.25", 3.5" and 2.5" Front I/O port includes: USB 3.0 x 2, USB 2.0 x 1, combo audio x 1

Signature Raven styled front panel adorned with brilliant RGB Light strip Includes addressable RGB lighting in the front of the case. Mini-itx motherboard & ATX PSU compatible for wide array of building possibilities. Support cards up to 13 inches (330mm) to fit most high-end GPUs for compute power far exceeding consoles Positive air pressure design for excellent cooling/quietness and dust-prevention Fits in nearly any environment with horizontal or Vertical orientation

Equipped with 12 x 2.5" or 3.5" hot-swap trays with integrated backplane supporting SAS / SATA drives up to 12 Gb/s Support dual power supplies and triple 360mm radiators Removable front door witih security lock Support up to E-ATX or SSI-EEB motherboards and 8 expansion slots Support upright or horizontal orientation placements

Interchangeable front panel I/O, rackmount sliding rails, handlebars, 5.25” device, and PSU mounts can all be swapped between the front and back Support up to SSI-EEB motherboards with 8 Standard height expansion slots Supports up to two 160mm fans or one 280mm radiator Supports 2 x USB 3.0 and 1 x USB-C ports Support optional vertical placement with RAC-CF4-440 (sold separately)

Classic SilverStone styling Support graphics card up to 13 inches with a width restriction of 5.88 inches Mini-ITX motherboard and SFX PSU compatible Maximum performance in slim form factor with support for liquid cooling Fits in nearly any environment with horizontal or vertical orientation

Super small at only 7 liters Aluminum front panel with premium styling Includes one 120mm fan and support up to two 80mm fans Supports dual slot low-profile graphics or expansion card Supports Mini-ITX motherboard and SFX power supply Supports four 2.5” HDD/SSD

Panels lined with Asphalt sound-dampening material for improved noise absorption Clean internal look with PSU / drive bay cover and backside cable routing design Includes front mounted USB Type-C port Includes three 140mm fans designed to generate positive pressure Supports graphics cards up to 388mm (15.3")

Positive air pressure design for excellent cooling/quietness and dust-prevention Support expansion cards up to 13.6 inches (345mm) Supports Extended ATX motherboard Quick access filters to prevent dust buildup Lockable front door and power button ensure security of system and drives LED indicator with adjustable brightness Impressive storage capacity of up to eleven drive bays

Stack effect design with 90-degree rotated motherboard layout and Innovative 11.3° forward tilted GPU placement Supports up to XL-ATX and SSI-EEB motherboards and dual power supplies Three Air Penetrator 184i PRO fans included with support up to 540mm (triple 180mm) radiator Other radiator sizes supported: 120mm, 140mm, 240mm, 280mm, 360mm, 420mm, 480mm, 560mm Push button design for easy side panels removal and adjustable bottom fan bracket for increased airflow Includes PCIe 4.0 riser cable

Material: Plastic front door, steel body Motherboards: ATX, Micro-ATX, Mini-ITX 【Drive Bay】Exterior: 5.25" x 2. Interior: Hot-swappable 3.5" SAS/SATA x 8 (2.5" compatible) Cooling System: Back: 1 x 4.7 inches (120 mm) fan (compatible with 4.7 inches (120 mm) fan/radiator) Side: Dedicated drive bracket 4.7 inches (120 mm) fan x 2 Expansion Slots: 7 (CPU Cooler Limit): 5.7 inches (146 mm) Front I/O Ports: USB 3.0 Type-A x 2, Audio x 1, MIC x 1 Graphics Cards: Expansion 9.5 inches (241 mm) (9.5 mm) (9.5 inches (241 mm) (width limit) - 5.9 inches (149 mm) Dimensions: 8.5 inches (215.3 mm) (W) x 16.9 inches (426.5 mm) (H) x 19.3 inches (487.5 mm) (D), 15.7 gal (44.7 L)

Super small at only 7 liters Support up to two 80mm fans Multipurpose 4-in-1 bracket Support Mini-ITX motherboard and SFX power supply Support four 2.5" HDD/SSD

Supports three 3.5" SAS / SATA hard drives and speed up to 12Gbit/s with tray-less and screw-less design Supports one 2.5" hard drive and up to eight 3.5" hard drives Adjustable LED hard drive indicator and fan speed One 180mm Air Penetrator fan included for excellent system cooling Removable motherboard tray and top panel design.Easily removable filters.Abundant cable management space behind motherboard tray.Includes custom CPU cooler supporter

Supports 8 hot-swap SAS/SATA 2.5"/3.5" HDD/SSD drives with 12 Gb/s Mini-SAS HD SFF-8643 interface for fast data access Includes 3 hot-swappable 80mm fans and independent drive status LEDs for optimal cooling and drive monitoring Compatible with E-ATX, SSI-EEB motherboards and 7 low profile PCI/PCIe expansion slots Tool-less rail design supports up to 100 lb loading capacity and 430mm wide chassis Auto-lock handles for easy and secure rack installation. chassis and rails fit SilverStone RM series racks

Wireless front panel design Acrylic side panel Airflow-optimised housing design Decoupled power supply assembly Dust filter with magnetic holder on the top of the case