Computer Cases

Optimized Cooling and Stylish Design: With a glacier-inspired pattern and 2 side vents, the case maximizes airflow while maintaining an elegant and unique look.
Addressable RGB Fans: Comes with 2 pre-installed addressable RGB fans for efficient heat dissipation and expandable up to 8 fans for even better cooling performance.
Large Tempered Glass Side Panel: Showcase your PC's internal components with ease through the clear and protective 4mm tempered glass side panel, which stays secure with edge guard and easy thumb screw mounting.
Extensive Compatibility: Supports radiators up to 360mm and a variety of motherboards, including E-ATX (~280mm), ATX, mATX, and Mini-ITX, with a maximum CPU Cooler …

RGB LED Stripes on Front and Side - illuminated RGB light against the dotted grill on the solid steel front panel provides a dynamic gaming atmosphere
Premium Tempered Glass side panel fitted to provide a stunning view of the PC components
Water cooler bracket for vertical mount added to support a 240mm radiator - Put the latest AIO RGB water cooler in the center of the PC to show off the dynamic RGB lighting effect
Inner Panel included in the back for clean cable management
Structured for optimal airflow it quickly cools heat inside the system via a preinstalled 48mm RGB fan and a regular fan.

Hairline Pattern & Mesh DesignThe front mesh design provides optimal air circulation of the case and the hairline pattern brings out the stylish finish.Powder coated painting with excellent durabilityFor practicality of the user, T6's chassis is made of high strength steel sheet and is excellent in high pressure and heat. The black painting with powder coating applied throughout the chassis is highly corrosion resistant and practical.User-Friendly Case I/OContinent I/O layout design of T6 offers great experience to its user, comes with a USB 3.0 port that is 10 times faster than USB 2.0Cooling SolutionsDesigned to optimize cooling performance, mesh design is integrated to T6 along with 120mm …

PLEASE READ: This PC case will NOT fit an ATX Motherboard! This PC Case is a micro-ATX computer chassis that also supports Mini-ITX Motherboards ONLY.
Modern Aesthetic: Tool-less & Easily Removable Panoramic View Frameless Tempered Glass Front and Side Panels
Pre-Installed Fans: 3 x 120mm Addressable RGB fans provide full customization via a 3-pin header connection.
Enhanced Cable Organization: This product features ten integrated rubber grommets strategically designed to conceal and organize cables effectively.
For the Builder: The Zalman P30 offers builders more space than the conventional mATX mini-towers when building their PC

Perfectly Balanced: Like its big brother, the P30 - the P10 comes packed with premium features, while maintaining a compact micro-ATX form factor.
Modern Aesthetic: Easily Removable Panoramic View Frameless Tempered Glass Front and Side Panel
Pre-Installed Fans: 1 x 120mm ARGB Shark fin blade fans provide full customization via a 3-pin header connection.
Enhanced Cable Organization: Optimized layout that creates ample space for easy cable management.
Compatibility: Top Fan Support 3 x 120mm or 2 x 140mm, Top Radiator Support 1 x 120mm or 240mm, Rear Radiator Support 1 x 120mm, CPU Cooler Height Up to 173mm, PSU Length 175mm, GPU Clearance up to 384mm

The front mesh panel serves to optimize the airflow dynamics within the system, effectively facilitating superior cooling performance
4X 120mm ARGB fans included: The M4 comes equipped with four 120mm ARGB fans, allowing you to customize your lighting setup and create a unique and immersive gaming environment
The pre-installed ARGB controller facilitates easy management of the addressable RGB fans through a simple push-button interface
Tempered glass side panel: Show off your build with the included tempered glass side panel, which provides a clear view of your components and lighting
Multiple I/O ports: The M4 offers a wide range of connectivity options, including MIC port, 3.5mm Audio,…

Pre-installed 6 x 120mm ultra quiet high airflow case fans
Height adjustable anti-sag GPU support bracket is included
2 x Vertical PCI slot brackets included to support vertical GPU mount
Top-mounted I/O panel with audio-in/out, USB 3.0 and USB 2.0 ports
Offering tool-less design for quick and easy component installation

Engineered with a full mesh design, this revolutionary PC case sets a new standard for cooling efficiency and performance
Pre-installed 6 x 120mm ultra quiet high airflow case fans
Height adjustable anti-sag GPU support bracket is included
2 x Vertical PCI slot brackets included to support vertical GPU mount
Top-mounted I/O panel with audio-in/out, USB 3.0 and USB 2.0 ports
Offering tool-less design for quick and easy component installation

Support for the latest rear-side connector mainboards
Support for up to 10x 120mm or 6x 140mm and 3x 120mm fan positions
Dedicated 360 radiator support in the top without restrictions
Support for the largest graphics cards without compromise
Includes 4x M25-140 DRGB Fans included.

Support for the latest rear-side connector mainboards
Support up to 10x 120mm or 6x 140mm and 3x 120mm fan positions
Dedicated 360 radiator support in the top without restrictions
Support for the largest graphics cards without compromise
Ultra-fine Performance mesh front panel and top dust filter

SGCC steel MicroATX Mid Tower
2 x USB 3.0 - Audio In/Out
2 x 5.25" external drive bays External 5.25" Drive Bays
2 x 3.5" internal HDD bays Internal 3.5" Drive Bays
Cooling System: 1 x 92 mm rear exhaust fan, 1 x 92 mm front intake fan (optional)

[Light up the system] - 3 pre installed 140 millimeter 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI)
[Built-in dual mode 5V ARGB switch board] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.Material:SPCC
[27 LED modes via I/O port] - Wave mode/ flow mode/ RGB lighting (single color)/ Radar mode (Red, yellow, green, cyan, blue, White, Purple)/ breath mode (8 Colors)/ full lighted mode/ single color mode (7 Colors)/ light off
[Sync with motherboard RGB software] - Controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome through motherboards that have a 5V addressable RGB header
[Psu cover] …

[LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header)
[BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software
[27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off
[PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically …

Supports Mini ITX, Micro ATX, ATX, E-ATX Motherboard
Safe and Secure Dual 4mm Tempered Glass Panel (No Holes in Glass)
2x USB 3.0, 2x USB 2.0, 1x Headphone, 1x Mic Top Ports
GPU Support Bracket for Vertical Mounting (Riser Cable AC-053-CN1OTN-C1 not Included)
Includes 3x Ring 140mm RGB LED Fans with removable filters
Tt LCS Certified: Liquid Cooling Supported. Compatible with extreme liquid cooling configurations

Full view front & side tempered glass pillarless design.
Supports up to a 360mm Radiator at top.
3 x 120mm ARGB fans included.
I/O Ports: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
Max VGA Length: 420mm

Full view front & side tempered glass pillarless design.
Supports up to a 360mm Radiator at top.
3 x 120mm ARGB fans included.
I/O Ports: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
Max VGA Length: 420mm

Full view front & side tempered glass pillarless design.
Supports up to a 360mm Radiator at top.
3 x 120mm ARGB fans included.
I/O Ports: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
Max VGA Length: 420mm

Full view front & side tempered glass pillarless design.
Supports up to a 360mm Radiator at top.
3 x 120mm ARGB fans included.
I/O Ports: USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
Max VGA Length: 420mm

Octagonal tower chassis supports up to M-ATX motherboad
2 x 140mm CT Fan included
Supports up to 120/140mm fan x 3 or 420mm radiator
Horizontal display enabled by optional Chassis Stand Kit (Need to purchase seprately)
Addional LCD Screen Kit avaialble for purchase

Iconic Vertical Body Design
Supports up to a 280mm Radiator
Two CT140 PC Cooling Fans Pre-installed
Enough internal space to accommodate GPU up to 380mm in length

Maximized Airflow: Square-type mesh designed with great porosity engineered for maximum airflow efficiency
Extreme Cooling Solution: Enhanced 140mm ARGB fan design with 28mm frame thickness allows remarkably high airflow while remaining exceptionally quiet
Removable Top Panel: Special designs effectively help users easily install AIO Liquid Coolers allowing clean cable management and building
Interchangeable Side Panel Design: Enables switching between a full system showcase with tempered glass or a specialized mesh panel for enhanced cooling and airflow
Hidden Connector Design Support: Supports ATX motherboards with hidden connectors