Wire Detectors

NEW! – Target Control (TC) Mode locates the center, edges, and direction of wood studs, and not metal, up to ¾ in. (19 mm) deep. Identifies ‘safe-to-drill’ zones between adjacent drywall screws, nails, or protector plates StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep WireWarning Detection continuously alerts to the presence of live, unshielded AC wires up to 2 in. (50 mm) deep ACT (Auto Correcting Technology) automatically corrects common errors, such as when scanning begins over a stud LoLevel Indicator displays low (weak) signal objects, such as plastic water pipes, while in TC mode

Locates the edges of wood or metal studs up to ¾ inch (19 mm) deep Red LEDs light up every time a stud edge is approached Patented SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached Should scanning begin over a stud, Zircon's patented "over-the-stud" indicator alerts the user to start the scan in a new location Patented TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user when the tool is calibrated and ready to scan

Locates the edges of wood or metal studs up to 3/4-Inch (19 mm) deep DeepScan mode doubles the scanning depth to 1-1/2-inch WireWarning detection indicates the presence of live wire up to 2" Easy-to-read LCD display indicates when a stud edge is approached Updated spotLite pointer shines an arrow-shaped light on the wall to mark the target

Ergonomically designed grip allows a comfortable hold on the tool for any size hand, at any angle ACT (Auto Correcting Technology) automatically corrects common user errors, i.e. when scanning begins over a stud, as the Signal Strength Indicator help distinguish shallower targets from deeper ones One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance to help you easily find studs, metal and live AC wiring while avoiding electrical hazards

The Zircon Multiscanner A200 features WireWarning Detection that indicates the presence of live, unshielded electrical AC wiring while scanning in all scanning modes. The Duracell Coppertop alkaline 9V batteries deliver long-lasting power and reliable performance for powering electronic devices. The Zircon Multiscanner A200 includes Auto Correcting Technology (ACT) to automatically correct common user errors while scanning over studs. The Duracell Coppertop 9V batteries are guaranteed for 5 years in storage so you can be confident they will be ready when needed. The bundle includes 2 Duracell Coppertop 9V batteries required to power the Zircon Multiscanner A200 stud scanner for optimal

Locates magnetic metal up to 4-inches deep and non-magnetic metal up to 2-inches deep Use pinpoint scan to locate small metal objects such as screws and nails Use wide scan to detect metal in walls or concrete Led arrays indicate signal strength

AUDIBLE ALERTS: The sensor pings any time you hit the center of a stud STUD DETECTION: Can locate the edges and center of wooden or metal studs up to 1 1/2 inches deep LIVE WIRE DETECTION: An alert pops up in the corner of the display whenever the system detects electrical currents up to 2 inches under the surface LCD DISPLAY indicates when you are nearing the edge and center of a stud. It also tells you when re-calibration is necessary SPOTLIGHT: Visual cues in the form of a glowing arrow aid you in finding the location of metal and wooden studs

4 MODES: Stud Scan lets you find studs up to 3/4 inch deep, Deep Scan lets you find studs up to 1 1/2 inches deep, Metal Scan lets you find metal up to 3 inches deep, and AC Scan lets you find live, unshielded electrical wire up to 2 inches deep BACKLIT DISPLAY lets you see the screen even when working in poor lighting conditions DIGITAL SCREEN displays bars that increase in volume as you get closer to studs or pieces of metal POINTER ARROW shines onto your working surface when directly over the object you’re scanning OPTIMIZED FOR interior use only due to the uneven surfaces and varying density that comes with exterior construction techniques

4 MODES: Stud Scan lets you find studs up to 3/4 inch deep, Deep Scan lets you find studs up to 1 1/2 inches deep, Metal Scan lets you find metal up to 3 inches deep, and AC Scan lets you find live, unshielded electrical wire up to 2 inches deep LCD DISPLAY is backlit so you can work in low light conditions DIGITAL SCREEN displays bars that increase in volume as you get closer to studs or pieces of metal POINTER ARROW shines onto your working surface when directly over the scanning subject OPTIMIZED FOR INTERIOR USE ONLY due to the uneven surfaces and varying density that comes with exterior construction techniques

STUD ENSOR 50 STUD ENSOR 50 STUD ENSOR 50 STUD ENSOR 50 STUD ENSOR 50

Detects wood & metal studs up to 3/4" deep. Identifies wires up to 2" deep. Excellent product 100% satisfaction

Stanley Stht77-406 Stanley Stud Sensor

Detects wood & metal studs up to 3/4" deep Identifies wires up to 2" deep 1-pass center-find locates stud center

The name of a pro Sequential LEDs and audible beeps indicate reading Power source type: Batteriebetrieben Marking channel with LED identifies target and makes marking surfaces easy and accurate Voltage: 9.0.Package Dimensions: 24.612 L x 3.81 H x 13.97 W (centimeters).Colour: yellow/black

Introducing the 4th generation that has been trained and evolved in the field Color display shows results and materials clearly Easily store detected images and transfer them to your PC, making it easier to use and safer to use Detectable objects: Various metal, plastic pipes with water inside diameter of 0.4 inches (10 mm) or more, hollow plastic pipes with inner diameter of 0.8 inches (20 mm), power wire, three-phase AC wire, low voltage wiring, metal pipe, rebar, wood, cavity Detectable structures: Concrete, reinforced concrete, brick, blocks, ALC, wood and masonry boards Selectable Display Views: Object view, spot view, 2D signal view, signal view. Features a spot view that allows detection …

Product 1: Detection: The Bosch GMS120 Digital Wall Scanner features multi mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring Product 1: Performance: Features the latest 3 sensor laser technology, offering a wide range of detection performance of up to 4 3/4 Inch deep in cured concrete, up to 2 inches for live wiring, up to 3 1/8 inches for copper and up to 1 1/2 inches for wood studs. The accuracy of the product is 0.0625 Product 1: Self calibrating: Includes 3 selection modes for wood, metal, and AC wiring. The GMS120 offers automatic calibration from the start and continues to self calibrate through the course of the project for easy

DURABLE: Frame is made from heavy duty cast aluminum Plastic EASY TO READ: Tinted 360° vials make it easy to read Made in the USA or Imported USE ON ROUND SURFACES: Pipe groove enables use on rounded surfaces Detects studs edge-to-edge up to 3/4" thick HANDS-FREE OPERATION: Magnetic strips allows hands-free operation on metal surfaces Leds Flash and the device beeps when studs are located Ergonomic design Included Components: (2) AA Batteries