Printer Parts

Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.). 1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase. High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism. Low noise: stepper motor with low noise level and efficient heat dissipation has the

Best Performance-Bowden tubing is made of high temperature resistant tpfe, with precise inner and outer diameters, and both inside and outside are very smooth to ensure smooth passage of all filaments. Work Well-Teflon tube length: 2pcs*1 Meter/PTFE tube Inner Diameter: 2mm use for 1.75mm filament.It is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. High Grade pneumatic connector-Package comes wi

Size: 235mmx 235mm (9.25"x9.25") Flexible 3D Printing Build Plate: reusable, provides a durable and stable build surface whilst preventing model warping. Single sheet design installs more quickly and with fewer bubbles than tape or films Please level the build plate well before printing. The temperature of the hot bed under 80 degrees is recommended. Separation type bending to take the model. It's more convenient. No need the beauty of paper and scraper to assist the model.

2 Pcs Build Plates for Tina 2The size of build plate is 110X120mm. Suitable for Tina 2 3D printer. The smooth and flat surface is flexible and removable, easy to remove prints. Strong Adhesion The adsorption force of the 2 pack build plates is strong, so that the prints can be sticked on the surface firmly. After printing, bend the flexible plate, the prints can be removed easily. Flexible Removable Magnetic Bed Separation type bending to take off the model. Do not need the removal tools and scr

Compatible Models: This 3D printer filament detection device sensor kit is compatible wiith Ender-3/Ender-3S/Ender-3Pro/Ender-3 V2/Ender-3 Max/Ender-6/CR-10 V2/CR-10 V3/CR-10S Pro/CR-10S Pro V2/CR-10 Max 3D printer. Independent modularized design: It has been redesigned with new internal structure. The outer cover is frosted, the manufacturing is stylish and unique. Precise detection: the blue LED indicates normal filament feed and the blue LED goes out when the filament runs out. Smooth Filamen

Industry's first 3D cleaning filament Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius. Cleans the extruder's interior by removing accumulated residual filaments. Possesses a certain level of adhesive quality. Will not clog extruder. Clean the 3D printer's extruder before and after printing for better extruder protection.

It's a Z-Axis Leadscrew Top Mount for 3D Printer Apply to: Creality CR-10, Tornado, Ender 3 etc Material: Aluminum alloy Color: Black After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.

42-40 nema 17 stepper motor, size 42 * 42 * 40mm Come with 1M (39.3") Cable High torque -Holding torque up to 0.4Nm. Low loss stators have better high speed performance Widely works for Rep Rap, Prusa i3, Delta Kossel 3D printers and CNC machines For the sequence of the motor cable difference, you need swap middle two wires (the green and the red) of one end if you want use it for ender 3 series

Official Guarantee: 100% Creality official stepper motor, our 42-40 stepper motor compatibility with Ender 3/Ender 3 V2/Ender 3 pro/Ender 5/5 pro/5 plus/Ender 3 max/CR-10/CR-10s/CR-10 V2/CR-10V3 3D Printer. Parameter: 1.8-degree step angle, 0.4 N.M holding torque, with 1A rated current per phase. (The connecting cable is not included.) High-Quality Stepping Motor: With low power, stable speed and performance, low noise, and no step loss during operation, which ensures the stable operation of the

Professional Packaging & Vacuumed Sealed Net Weight: 0.8KG.The silk like filament from YOYI YOYI came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models. High Print Quality Minimum tolerance and low warping to ensure consistent feeding and smoothing prints. No clogging, no tangle, no bubble, extremely high success rate, resulting in printed parts that have an outstanding surface finish and are highly

SPECIFICATION: 1.0 Kg (approximately 2.2 lbs) 1.75 mm diameter PLA filament. Uniform and consistent filament diameter accuracy controlled by 2-axis laser system, guarantees dimensional accuracy of +/- 0.05 mm ATTRIBUTES: Tougher and less brittle compared to regular PLA, easy to print at low temperatures. Superb layer adhesion, smooth surface finish, limited smell, very low shrinkage and warping. Clog free, Bubble free, No Tangle spool winding. Completely dried before packaging MADE IN USA: Basic

MATTE PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) MATTE PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm) INLAND MATTE PLA FILAMENT: Matte PLA produces a printed surface that diffuses light, giving i

Material: ABS / Color: Fighter Jet Blue / Thickness: 1.75 mm Spool Weight: 1.0 kg (2.2 lb) Spool Size: 2.00" ID / 7.75" OD / 2.88" Depth Bed / Print Temperature: None / 195 - 210 C (383 - 410 F)

Sponsored by eBay

Soft PLA material Low Warp on a cold bed High percentage of bioplastic Most popular material for 3D printing

RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if youre not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm Glow PLA filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool. Professional printing advice from technique support team. GLOW IN THE DARK Contains phosphorescent materials that glow in the dark after absorbing light energy. Enjoy different printing fun with Duramic 3D Glow PLA. To en