Printer Parts Two Trees

1. This 3D printer 70W heating cable has a heating temperature of 70W up to 500 Celsius, which can heat faster than a 50W heating cable, and is more responsive.2. Made of stainless steel material, it is durable, anti-rust, and long-lasting.3. It features 150cm length and 6mm diameter, and the cross-section of the copper wire inside the heater is 0.5mm⊃2.

1. Anti-Static, non-magnetic, curved precision tweezers, great for nozzle maintenance and cleaning excess support material.2. Handy, safe, and stylish container, great to keep nozzle cleaning needles safely together.3. This kit is suitable for removing excess plastic and clearing jams with high precision, also great for general maintenance of the heatsink section.

1. This is a branch design of the bimetal HEATBREAK. Its thermal blocking front end is made of titanium alloy and the back end is made of copper alloy material. It has a strong thermal blocking ability.2. The temperature resistance is up to 500 Celsius.3. It is composed of titanium alloy and red copper, which ensures a wear-resistant type of throat pipe. The titanium alloy part also helps to maintain a stable temperature at the front end of the throat pipe, and the copper part can quickly dissipate heat.4. Suitable for printing consumables with higher hardness.5. Bi-Metal Heatbreak (Smooth version) is compatible with Ender 2/Ender 3/Ender 3 PRO/Ender 5/Ender 5 PLUS/Ender 5 PRO/Ender 6;

1. The hardened steel design makes it more durable and wear-resistant. Also, the biting teeth are very sharp and not easy to slip.2. This extruder drive gear kit has improved the quality to ensure the quality of your work and bring safety to your work.

1. PTFE coating can effectively inhibit the adhesion of 3D printing filament on the nozzle surface.2. Made of brass material, this nozzle is not easy to scratch, has a longer life and thermal conductivity, and is not easy to plug.

1. From the original 0.3mm high-temperature line to 0.5mm thick high-temperature braided wire, this heating rob can heat evenly and is safe and durable.2. This heating rod is made of standard 304 stainless steel, which will not cause the heating rod to burst during work or damage the machine.3. The internal use of high-quality 2080 nickel-chromium wire and industrial-grade external pipes, which has good performance and insulation.4. It has 50W power and a maximum heating temperature of about 340-350 Celsius. Also, it can be used with the new version of HTM-NTC100K temperature measurement thermistor (resistance temperature measurement can reach 350 Celsius).

1. Adopting high-quality thermoforming, high-temperature carburizing, and hardening treatment, this nozzle has super wear resistance, heat resistance, high hardness, high toughness, and long service life. It is compatible with most high-temperature printing filaments on the market.2. The bottom of the nozzle is flat and fits perfectly with the throat, effectively avoiding material leakage, and the chamfer is rounded to reduce the resistance of the edges to the consumables.Tips for nozzles:When disassembling, heat to over 200 Celsius before disassembling!

These volcano nozzles are made of durable brass materials, and the V6 standard nozzle with M6 thread is perfect for your 3D printers.

1. PTFE coating can effectively inhibit the adhesion of 3D printing filament on the nozzle surface.2. Made of brass material, this nozzle is not easy to scratch, has a longer life and thermal conductivity, and is not easy to plug.

1. Adopting high-quality thermoforming, high-temperature carburizing, and hardening treatment, this nozzle has super wear resistance, heat resistance, high hardness, high toughness, and long service life. It is compatible with most high-temperature printing filaments on the market.2. The bottom of the nozzle is flat and fits perfectly with the throat, effectively avoiding material leakage, and the chamfer is rounded to reduce the resistance of the edges to the consumables.Tips for nozzles:When disassembling, heat to over 200 Celsius before disassembling!

1. Made of high-quality copper material, this 3D printer extruder nozzle is anti-corrosion, wear-resistant, and has high hardness.2. The contact surface is flat to solve the problem of filament leakage and effectively prevent the print head from leakage.

1. PTFE coating can effectively inhibit the adhesion of 3D printing filament on the nozzle surface.2. Made of brass material, this nozzle is not easy to scratch, has a longer life and thermal conductivity, and is not easy to plug.

1. From the original 0.3mm high-temperature line to 0.5mm thick high-temperature braided wire, this heating rob can heat evenly and is safe and durable.2. This heating rod is made of standard 304 stainless steel, which will not cause the heating rod to burst during work or damage the machine.3. The internal use of high-quality 2080 nickel-chromium wire and industrial-grade external pipes, which has good performance and insulation.4. It has 50W power and a maximum heating temperature of about 340-350 Celsius. Also, it can be used with the new version of HTM-NTC100K temperature measurement thermistor (resistance temperature measurement can reach 350 Celsius).

1. Adopting high-quality thermoforming, high-temperature carburizing, and hardening treatment, this nozzle has super wear resistance, heat resistance, high hardness, high toughness, and long service life. It is compatible with most high-temperature printing filaments on the market.2. The bottom of the nozzle is flat and fits perfectly with the throat, effectively avoiding material leakage, and the chamfer is rounded to reduce the resistance of the edges to the consumables.Tips for nozzles:When disassembling, heat to over 200 Celsius before disassembling!

1. This extruder Kit has a double-gear extrusion mechanism, which features high extrusion force, ensuring smooth feeding.2. The original aluminum alloy driver is suitable for CR-10S PRO, and can also be installed in Ender-3, Ender 3 Pro, Ender 5, etc, which is stable and durable.

Upgraded ExtruderThis upgraded extruder for Voron M4 is durable and not easily deformed, its housing is printed with PETG. (Please note: Motor is not included.)Wide CompatibilityThis 3D printer parts kit is suitable for Ender 3, Ender 3 pro, Ender 3 V2, Ender 3 Max, Ender 5 pro, CR10-V2, CR-10S pro, CR-10 mini, and CR-10S5. If you want to use and would like to design a mounting bracket, then this extruder will be suitable for any 3D printer with FDM forming principle.Smoother PrintingThe printing surface is smoother and more delicate. It makes loading the filament easier and smoother without worrying about the filament being scratched or broken. The extruder runs smoothly, the engaging gear

Great ReplacementAluminum adjuster wheels and bed leveling springs combined with the all-metal extruded made a big difference in the print quality of your Creality 3D printer. They are awesome upgrade kits for Ender 3, Ender 3 Pro, Ender 5, CR-7, CR-8, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR 20.Metal Bowden ExtruderThe all-metal Mk-8 extruder feeder drive 1.75mm filament is very well built and seems to grip the filament a lot better than the plastic stock one, which can prevent downtime from the stock plastic version failing, no worries about filament scraping or breaking.4 Hand Twist Level NutsMetal nuts are more powerful and will twist more tightly than the

1. Made of high-quality copper material, this 3D printer extruder nozzle is anti-corrosion, wear-resistant, and has high hardness.2. The contact surface is flat to solve the problem of filament leakage and effectively prevent the print head from leakage.

High PerformanceHigh performance and low cost, it is very practical. The extruder is made of high-quality aluminum alloy, with high precision and strong loadbearing capacity.USB ChargingThe USB charging is convenient and simple.TWO TREES BrandThe extruder hot end is mainly used for the heating of the three-tier printer, while the two trees are not easy to fall off

TWO TREES short-stroke extrusion bracket is suitable for most 3D printers, such as CR10, Ender-3, Ender-5, etc.

High PerformanceHigh performance and low cost, it is very practical. The extruder is made of high-quality aluminum alloy, with high precision and strong loadbearing capacity.USB ChargingThe USB charging is convenient and simple.TWO TREES BrandThe extruder hot end is mainly used for the heating of the three-tier printer, while the two trees are not easy to fall off

TWO TREES short-stroke extrusion bracket wheels kit is suitable for most 3D printers, such as CR10, Ender-3, Ender-5, etc.

1. This CHT nozzle is made of durable brass material and has PTFE (Teflon) coating. It can offer a large flow, which is excellent for high-speed 3D printers to increase printing speed.2. It has a smooth inner wall without burrs, which can bring smooth printing and is anti-drawing.3. With a max printing temperature of 300 Celsius, it can provide good thermal conductivity.

1. This CHT nozzle is made of durable brass material. It can offer a large flow, which is excellent for high-speed 3D printers to increase printing speed.2. It has a smooth inner wall without burrs, which can bring smooth printing and is anti-drawing.3. With a max printing temperature of 300 Celsius, it can provide good thermal conductivity.