Printer Parts

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors. Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying. Used for heated bed or hot end. It has 2 pins female connector. After-sales Service: If you have any unsolvable problems during using this product, please feel

High Quality- 0.4mm high-speed nozzles are made of high-quality international standard brass. These 3D printer nozzles have better thermal conductivity and higher hardness. The printing effect is better than ordinary 3D printer nozzles. Easy to install and change. Delicate Workmanship- Smooth inner wall without glitches, avoid blocking of the filament. Chamfer craft and smooth surface reduce the resistance to filament so that the filament comes out smoothly. Seamless junction prevents filament l

Major Upgrade From The Original Leveling Spring - Now you spend much less time leveling your 3D Printer bed. Once you get level, you won't need to re-adjust for quite a while. Effectively avoid layer shifts caused by bed shaking during printing. The trick is that the short mount needs to go ON TOP of the strain relief, not under it. The 1/4 quantity in the package is a short column(3 short in 12 pack; 2 short in 8 pack). There is a Bed Cable cage at the left rear of the Creality Ender 3D Printer

3D Printer Drive gear for Prusa i3 mk3 drivegears kit for upgrade MK2/MK2S/MK2.5 3D Printer extruder dual gears for prusa i3 Mk3

New designed MK nozzle is crafted with advanced processing technology, which makes the printing model more smooth and delicate. Ender 3 S1/Ender 3 S1 Pro/Ender 3 S1 Plus/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo 3d printer original accessories. aperture, which greatly helps reduce friction resistance to the filament, promoting smoother filament feed-in. 0.4mm output diameter and M6 diameter external thread for connection. Compatible with Sprite Extruder/Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error. Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature. Dimensions: 42x42x23mm/1.65""x1.65""x0.9"" ,1.8 deg. step angle(200 steps/rev),Rated curren

Stainless steel material, sturdy and durable, not easily damaged, and long service life. Special accessories for 3D printers. Model: GT2. Type: Belt clamp crimp style. There are 12PCS 3D printer clips in the package.

As you can see, our silicone sock has a very good edge treatment,the outer wall is very straight and the edges are perfect Only Compatible with FDM 3D printer equipped with sprite extruder or sprite extruder pro kit, like Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 and Sermoon V1 Pro 3D Printer heater block Made from high temperature Silicone material, can work for longtime at 300C degree. But PLEASE NOTE if your printing temperature is over 300C degree, please remove the silicone cove

Upgrade Leveling Parts- Silica leveling column makes an excellent substitute for spring bed, and proved to be more stable with less vibration to freely level the hot bed platform. High-Temperature Resistance- Made of high quality silicone, the Ender 3 silicone bed mounts have high-temperature resistance, hotbed abrasion resistance and strong adhesion. It is easy to install and replace. Product Size- Package comes with 6 high and 2 short silicone bed mounts. Height: High 0.71"/18mm, Short 0.63"/1

The Oldham coupling is made of brass, reduce friction and has sufficient strength, high precision to make the connection gap between three parts lowest, low movement of inertial high torsional stiffness, Protect driven parts and support bearings, used to advoid the effects for large radial misalignment The use of this shaft coupling for the Z-axis screw of the 3D printer will reduce the printing quality problems caused by the swing of the hot bed during the printing process. The center distance

Outer Diameter: 24mm. Bore: 5mm. Height: 10.2mm. Net Weight: 14g/pcs. High Quality Material3DMAN POM pulley wheels are made of high quality POM material, which has excellent abrasion performance, flame retardancy and anti-oxidation, Also strong material with outstanding wear ratios. Smooth and Precise T hese smooth and precise POM wheels move smoothly, solve wobble problem, have low noise and high printing accuracy, and can greatly increase the printing speed, which are useful 3D printer accesso

Material: Aluminum Alloy; It is machined with very high precision and high quality The size is 22x16x11mm. Also can be used for OD3mm temperature sensor V6 hotend use This heater block is for OD 3mm cartridge temperature sensor Package: 2pcs aluminum heater blocks PLEASE NOTE: The screws used on the heater blocks may be black color, please know before ordering.

This nozzle is 0.6mm for 1.75mm filament use, Compatible with Artillery Sidewinder X1 X2 Genuis, Vyper 3D Printer and other 3D Printer which uses Volcano Hotend Made from Hardened steel material, can take very high temperature Up to 450C degree, good for printing PEI PEEK Carbon Fiber filament, can also can be used for other normal filaments like ABS PLA Black surface treatment, protect the nozzle and have longer lifetime Package: 1piece nozzle

Application Apply 3D printer (24V power supply) nder 3 s1 Ender 3 V2 Ender 3 Pro Ender Max Neo Voxelab Aquila Kobra CR-10S Pro Lk5 Pro Touch switch Touch the LED light bar to adjust the blue area, long touch to adjust the brightness, and single touch to control on and off. Installation There are various installation methods. You can directly install with double-sided tape or print STL model to assist installation. Note If there is any problem with the product, please contact us and we will solve

The hole size is 0.150mm, which means there are 100 meshes per in². Can filter impurities in resin of UV 3D printers, for 1-2 times Can filter the alcohol after cleaning the resin models, for 1-3 times

Creality CR-6 SE 3D Printer Y-axis Timing Rubber Belt with Copper Buckle Non-Slip Rubber belt with fiberglass reinforced, cooper buckle included. Designed to replace the Y-axis belt on the CR-6SE 3D Printer. So that, you will have everything you need to replace the CR-6 SE's old belt. Easy to install and replace. The copper buckles at the end point have been pressed, you don't need a special tool to do that. Package: 1 pc 743 mm open timing belt with pressed copper buckles.

Compatible with Original 3D Ttan Extruder, Prus i3 MK2, Ultimat, Artillerie Sidewinde X1 Printer Extruder, 4max Pro Material: all metal, durable quality, much better than the standard plastic arm. Comes with scattered set, you need to assemble it yourself, it is easy. If you have any problems with this item, please send us an email with your order number. We will do our best to help you. What you get: 1 piece Ttan extruder idle arm.

This idler arm is upgraded with U groove gear bearing to replace the old version with smooth surface bearing. A groove in the middle, the filaments are not easy to slip when you printer works. Compatible with original titan extruder, titan aero extruder, Prusa i3 MK2 3D Printer, Sidewinder X1 X2, Genius printer's extruder, Anycubic Chiron, 4max pro and Sovol SV01 D Printer Used for 1.75mm filament. Material: Aluminum alloy, stable, good quality Package: 1piece idler arm assembled with U groove g

Maintains Hotend Temperature: The perfect accessory to help maintain your M5 3D printer's hotend temperature, keeping your prints consistent and high-quality. Heat Up to 260°C (500°F): With the ability to heat up to 260°C (500°F), this cover will ensure that your printer stays at the optimal temperature range for a variety of materials, from PLA to ABS and beyond. Prevent Plastic Combustion: The silicone cover acts as a layer of protection to prevent plastic combustion and keep your printer safe

Must spare accessories for most MP Select Mini V2 printer, but make sure the heater block dimensions are 16mm x 16mm x 12mm. Some early batches of Select Mini V2's had heater blocks that are 20mm x 20mm x 10mm. Also work for 3D Printer Malyan M200 Requires using the stock cotton insulation under the silicone sock, replace the original Kapton tape. Other insulation will probably work if it is similar thickness. Not using any cotton insulation will make the silicone sock have a loose fit. Our shop

Creality CR-6 SE 3D Printer X-axis Timing Rubber Belt with pressed copper buckle Non-Slip Rubber belt with fiberglass reinforced, cooper buckle included. Easy to install. It's designed to replace the Y-axis belt on the CR-6 SE 3D Printer The copper buckles have been pressed at both ends to save your time to replacement Package: 1 pc 743 mm open timing belt with pressed copper buckles.

This is made from Aluminum, Black Anodized surface treatment. Good adapter mout for Upgrade V6 hotend Volcano hotend Dragonfly BMS BMO and other V6 groovemout hotend to creality 3D Printer with no Z stop height adjustment Weight: about 17g, very light, very simple design. Applicable for Creality Ender 3/ Ender 3 V2 / Ender-3 Pro CR-10 / CR-10 S4/CR-10 S5 / Ender 5/ Ender 5 pro /Ender 5 plus 3D Printer, Not fit for CR-10 MAX/ V2/ V3 Installation: 1. use two m3 short screws to fix the L shape brac

Compatibility: fit for 3D Printer 1.75mm Filament and other devices. Blue bowden tube: durable PTFE material, safe and odor-free, self-lubricating, high-temperature resistance; Inside diameter 2mm, outside diameter 4mm. PC4-M6 fittings: copper and plastic material, durable and sturdy; Thread: 6 mm, inner diameter(blue end): 4mm, fit for the tube whose outer diameter is 4mm. PC4-M10 fittings: stainless steel and plastic material, anti-oxidation, anti-corrosion, and high hardness; Thread: 10 mm, i

Package includes: come with 6 pieces 3D printer 1.75 filament filters in gray color, this cleaner blocks flame is a useful 3D printer part and accessory to extend your nozzle's and hot-end's using life Stable material and reasonable design: the filament cleaner blocks are made from crack resistant rubber foam material, which can slip over standard 1.75 mm diameter ABS, PLA or other 3D printing filaments conveniently and smoothly Dimension: product size is 15.5 x 30 mm, packing size is 148 x 102