Printer Parts

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant Recommended Nozzle Temperature: 190 - 225 C 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

Extruder Feeder Big Gear 66 Tooth Stainless Steel Gear Replacement 3D Printer Accessories

Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot Rep Rap, etc. High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 260 degrees Celsius (500 Fahrenheit ) Function: Keep heater block temperature constant, so that improving print quality, save electricity and prolong the service life of heater and temp sensor Use-method:

Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filaments temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. Compatibility: Fit with MK10 hotend M7 thread aluminum h

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant Recommended Nozzle Temperature: 190 - 225 C 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant Recommended Nozzle Temperature: 190 - 225 C 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant Recommended Nozzle Temperature: 190 - 225 C 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant Recommended Nozzle Temperature: 190 - 225 C 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more!

Discover the Epson S091003, a durable and high-quality Ozone Filter designed specifically for the EPL-8000 Laser Printer. This innovative filter is engineered to efficiently remove ozone from the printing process, thereby maintaining the superior output quality of your printer. Constructed with reliability in mind, this ozone filter is a testament to Epson's commitment to producing long-lasting products that enhance the performance of your equipment. Its precise fit for the EPL-8000 laser printer ensures optimal functionality, making it an indispensable component of your printing setup. Experience the difference of a clean, ozone-free printing process with the Epson S091003 Ozone Filter for

High Quality- 0.4mm high-speed nozzles are made of high-quality international standard brass. These 3D printer nozzles have better thermal conductivity and higher hardness. The printing effect is better than ordinary 3D printer nozzles. Easy to install and change. Delicate Workmanship- Smooth inner wall without glitches, avoid blocking of the filament. Chamfer craft and smooth surface reduce the resistance to filament so that the filament comes out smoothly. Seamless junction prevents filament l

Maintains Hotend Temperature: The perfect accessory to help maintain your M5 3D printer's hotend temperature, keeping your prints consistent and high-quality. Heat Up to 260°C (500°F): With the ability to heat up to 260°C (500°F), this cover will ensure that your printer stays at the optimal temperature range for a variety of materials, from PLA to ABS and beyond. Prevent Plastic Combustion: The silicone cover acts as a layer of protection to prevent plastic combustion and keep your printer safe