Printer Parts

3D Printer Drive gear set is compatible with Prusa mini 3D Printer Material: Hardened steel, and with nickel plated treatment to advoid rusting and make the surface smoother. High precision package: 1piece small gear with set screw, 1 piece big gear

Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the same size heating block that support the thermocouple. The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300 for a short time using, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament. Please note that the temperature should not be over 300 °C, other

Sponsored by eBay

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass) Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed) ABS and PLA filaments (a

Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filaments temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. Compatibility: Fit with MK10 hotend M7 thread aluminum h

The CH-G2 Color Ink Print Head is a replacement for the Print Head installed in Canon MAXIFY GX2020 & GX1020 MegaTank Printers. Designed to be easily replaceable by users.

Sponsored by eBay

With the SLINGER PRINTER BAG, ensure the utmost protection and transportability for your valuable printing equipment. This robust carrying case is specifically designed to accommodate a variety of printer sizes and related accessories, making it an essential accessory for professionals on the go. The interior of the bag boasts a customizable layout, thanks to a movable divider that can be adjusted to snugly fit your device or to create two distinct storage areas, catering to your organizational needs.Crafted with meticulous attention to detail, the bag is lined with thick padding on all sides, providing a cushioned environment that shields your printer from impacts and vibrations during

The Gearing Ratio is 3: 1, High precision, we recommend E-step value 385. And to adjust the tightness of thumbscrew to fit the printing. And The gears can be suitable for all 1.75mm filaments even flexible filament like TPU. Two drive wheels grip the filament from each side, providing a robust and reliable feed into the hotend. From common materials like PLA and ABS to flexible filaments like TPU or TPE, the dual-drive gears of the Extruder can deliver a consistent flow of filament in either dir

Original ANYCUBIC Kobra Hotend Replacement: This hotend is only compatible with Anycubic Kobra 3D printer,NOT for Kobra GO,Kobra Neo, Kobra Max,Kobra Plus. High-accurate Brass Nozzle: With original high-accurate Anycubic brass nozzle,it can provide smoother printing,thus having better printing result. Plug and Play: Both of the thermistor and heating rod come with connector, no wiring and peeling works.So it will be quite easy to install on ANYCUBIC Kobra 3D printer. Filament Compatibility: The

Silk PLA Filament Different from the ordinary PLA filament, this magical 3d filament is composed of shiny white. It adds a silky metallic feeling, allowing you to print silk texture in a 3D printing project, bringing you a smooth printing surface and satin silk luster. Precise 3D Filament The diameter tolerance of this 1.75mm PLA filament is +/- 0.02mm. 3D printing filament diameter tolerance is more stable, and the printing is smoother. The high tough filament is recommended to print the temper

Fits: Flash Forge Creator Pro, Flash Forge Creator X, Flash Forge Dreamer, Dremel Idea Builder, Power Spec 3D Pro, Power Spec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Maker Select 3D Printer v2, Cocoon Create 3D Printer Nozzle size: .2mm Plated with Twin Clad XT Coating HIGH LUBRICITY WEAR RESISTANT Made in USA by Micro Swiss

This Heatsink with ID2.0mm Neck is to solve the heat-creep issues. It would be better if you can apply some thermal paste to properly fit the heatbreak into the CR10 orginal heatsink. Please Make sure that there is no gap between the heatsink and the heat breaker These heatbreaks is made from Titanium Alloy TC4 to provide excellent thermal isolation between heater and cooling block. Titanium is extremely strong material and offers almost 3x lower thermal conductivity than stainless steel, creati

USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. Package Dimensions: 3" L x 0.5" W x 2" H

Size: 235mm x 235mm. Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward. Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models. Single sheet design installs more quickly and with fewer bubbles than tape or films. Durable construction allows for multiple uses with either the same or different filament materials.

Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step. High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan. Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pr

Help in 3d printing: High viscosity formula, apply Geeetech pla glue on the hot bed before printing to improve the bed adhesion of a print bed to prevent warping or shifting and enhance your 3D printing experience. It is easier to remove the printing models. Wide Compatible: 3D printer glue perfect for all 3D printer hot beds, including build surface sheet plates, aluminum and glass plate, PEI, carbon crystal glass, 3D printer stickers, Kapton, etc. It's also suitable for school projects, art cr

MATERIAL: Made of high-quality zinc alloy, strong and durable, high strength, not easy to rust. PACKING QUANTITY: 4 Sets Flexible Pivot Joint. SUITABLE FOR: 2020 series European standard aluminum profile connection, with a range of 180 degrees rotation. The connectors are widely used to build routers, 3D printers, robotics projects, and more. NOTE: Before placing an order, please confirm whether the aluminum profile size is appropriate.

Double Gear Extrusion Mechanism: The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend. Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up. Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue. Appli