Printer Parts

3D Printer Drive gear set is compatible with Prusa mini 3D Printer Material: Hardened steel, and with nickel plated treatment to advoid rusting and make the surface smoother. High precision package: 1piece small gear with set screw, 1 piece big gear

Upgrade HT-NTC100K Thermistor: package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the same size heating block that support the thermocouple. The temperature measurement: -50 °C ~ +250 °C for a long lifecycle, sometimes can reach up to +300 for a short time using, can replace the original K-type thermocouple temperature, very fit for printing high-temperature filament. Please note that the temperature should not be over 300 °C, other

Sponsored by eBay

Sponsored by eBay

Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass) Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed) ABS and PLA filaments (a

Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filaments temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. Compatibility: Fit with MK10 hotend M7 thread aluminum h

The CH-G2 Color Ink Print Head is a replacement for the Print Head installed in Canon MAXIFY GX2020 & GX1020 MegaTank Printers. Designed to be easily replaceable by users.

The Gearing Ratio is 3: 1, High precision, we recommend E-step value 385. And to adjust the tightness of thumbscrew to fit the printing. And The gears can be suitable for all 1.75mm filaments even flexible filament like TPU. Two drive wheels grip the filament from each side, providing a robust and reliable feed into the hotend. From common materials like PLA and ABS to flexible filaments like TPU or TPE, the dual-drive gears of the Extruder can deliver a consistent flow of filament in either dir

Sponsored by eBay

Original ANYCUBIC Kobra Hotend Replacement: This hotend is only compatible with Anycubic Kobra 3D printer,NOT for Kobra GO,Kobra Neo, Kobra Max,Kobra Plus. High-accurate Brass Nozzle: With original high-accurate Anycubic brass nozzle,it can provide smoother printing,thus having better printing result. Plug and Play: Both of the thermistor and heating rod come with connector, no wiring and peeling works.So it will be quite easy to install on ANYCUBIC Kobra 3D printer. Filament Compatibility: The

Reliable material: made of POM and plastic, its nice abrasion performance, flame retardancy and inoxidizability can assist your 3D printer to complete its work well Wide compatibility: it is applicable for the V slot profile of most DIY 3D printers, including, but not limited for Creality, Ender 3, Anet and more Nice performance: these 3D printer wheels move smoothly, have low noise and high printing accuracy, and can nicely increase the printing speed, which are useful 3D printer accessories Pa

Double Gear Extrusion Mechanism: The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend. Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up. Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue. Appli

MATERIAL: Made of high-quality zinc alloy, strong and durable, high strength, not easy to rust. PACKING QUANTITY: 4 Sets Flexible Pivot Joint. SUITABLE FOR: 2020 series European standard aluminum profile connection, with a range of 180 degrees rotation. The connectors are widely used to build routers, 3D printers, robotics projects, and more. NOTE: Before placing an order, please confirm whether the aluminum profile size is appropriate.

Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step. High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan. Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pr

UPGRADE DAUL GEARSDouble-gear and double-pneumatic joint extrusion structure, direct drive extruder, high extrusion force, enhancing the feed strength, ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps. COMPATIBILITYDouble gear mk8 extruder Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3initial version/Ender 3 v2/Ender 3 pro(suit for 3d printers with motor shaft over 20mm)/Ender 5/Tornado, etc. for 1.75mm filament STABLE

Size: 235mm x 235mm. Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward. Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models. Single sheet design installs more quickly and with fewer bubbles than tape or films. Durable construction allows for multiple uses with either the same or different filament materials.

Fits: Anycubic Kobra / Anycubic Kobra Max / Anycubic Kobra Plus / Anycubic Vyper / Artillery Genius Pro / Artillery Sidewinder X1 / Artillery Sidewinder X2 / Volcano 1.75mm / FLSUN Super Racer / FOKOOS Odin-5 F3 / Lulzbot TAZ MOARstruder / Tevo Little Monster Plated with Twin Clad XT HIGH LUBRICITY WEAR RESISTANT Coating For 1.75mm Filament Orifice size: .6mm Made in USA by Micro Swiss

New arrival: CC3D ABS+ Filament 1.75mm 1KG Great for creating durable items that require a higher resistance to heat. Very good adhesion.Lower odor. Can be polished with ethyl acetate.Acetone polishing is not recommended. Suitable for most FDM 3d printers in market.