Printer Parts

Compatible for Ender-3/Pro, Ender 3 V2, Ender 5/pro,CR-10. The bracket made of high quality metal material, high strength, durable and wear-resistant. 5 pin cable is about 1.3m, the split cable is about 1.5m. Easy to install,easy to install, with wrench included in the package. After-sales services: if you have any question during usage, please free free to contact us!

Compatible Models: This silicone socks and nozzles kit is compatible with Anycubic Vyper, Kobra Plus, Kobra Max FDM 3D Printers. Silicone Socks: The silicone sock is made of high quality silicone, which can withstand high temperature of 300 and can avoid burns when your hand accidentally touches the print head during printing, and also keep the heating block and nozzle clean. 0.4mm Brass Nozzles: The nozzle is made of high quality brass with smooth inner wall and no burr, which can ensure even a

PTFE White Tubing - the white color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3 PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper; PC4-M10 Fittings is made of stainless

Product Description PTFE Bowden tube Upgraded 100% suitable for Creality3D printer, outer diameter: 4.0mm inner diameter: 1.95mm ± 0.05mm, designed for 1.75mm filament, suitable for printing ABS, nylon and other special filament, suitable for Creality Ender 3/V2/3 Pro/ 5 CR-10 series/10S /20/20 Pro 3D printer Work Smoother PTFE Bowden tube is slightly softer than the original Teflon tube, the inner wall is smoother, wear-resistant and corrosion-resistant, can achieve higher responsiveness, less

The aluminum profile slot cover flat seal fits 3030, 4040 series European standard aluminum extrusion profile 8mm, and is widely used for frame structure of aluminum extruded profile, like industrial aluminum frame, CNC router, CNC laser cutting machine, 3D printer, 3D engraving machine, robot project, etc. Total length: 6m/19.7ft; Slot width: 8mm/0.31inch; Material: PVC; Color: Green. The slot seal strip is made of premium PVC, which is soft and durable to flatten the grooves and reduce the col

Durablility: These leveling nuts are made of premium aluminium alloy, rust and corrosion resistance, which have a longer lifespan than your plastic nuts. Upgraded design: made of aluminium alloy, rust and corrosion resistance, metal nut is more powerful and will twist more tightly than plastic nuts, long service life. Note: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You have to cut the springs or adjust the hot bed height. Easy to use: conveni

Package & Warranty You will 4pcs aluminum hand twist leveling nut and 8pcs black silicone leveling column(4*18 mm and 4*16 mm).If you have any questions, please feel free to contact us,we will provide you with a satisfactory solution. Upgraded Aluminum Blue Hand Twist Leveling Nut Made of high quality aluminum, last much longer than your stock plastic nuts. High Performance Metal nut is more powerful and will twist more tightly than plastic nuts.The torque of these nuts is large, making it easie

0.1 kg (0.22 lbs) 3D printer cleaning filament 1.75mm with vacuumed sealed. Using cleaning filaments can help cleanly push out stuck particles and carbonized plastic without damaging your nozzle. Recommended Cleaning Filament extrusion/nozzle temperature 160°C - 260°C (320°F - 500°F) Works and harmonizes perfectly with all common 1.75mm FDM 3D printers. We offer 24hours online aftersales sevice,100% Satisfaction Guarantee.

IMPORTANT! Please make sure that the nozzle and bed is cool down to room temperature before mount the sensor.The sensor will be destoryed if the nozzle temperature is too high Can be used with any printing surface including Printbite,PEI,Buildtak,Glass,Aluminium,FR4. Uses a standard endstop connector;Voltage comparator module can provide repeatable and stable single output Very easy to configure in your firmware,No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe This produ

Heating cartridge compatible with CR6 SE, CR-6 MAX, CR-5 Pro 3D Printer hot end heating block. Heating tube size: 6X20mm, terminal: XH2.54, 2PIN, metal stainless steel shell. Cable length with terminal: about 60mm Cable length with terminal: about 60mm. Heating tube is made of high-quality ABS plastic, a necessary CR6 SE hot end parts. Package includes: 2PCS 24v 40w cartridge heaters. Warm tip: To ensure that you can accommodate the heating head, please make sure your heating block hole is large

Suitable for Ender 3,Ender 3 pro ,Creality CR-10S series 3D Printer and other NEMA 17 stepper motors (for 5mm to 8mm shaft diameter) it also can be used with other 3D printers and CNC machines which are using 5mm shaft motor to 8mm lead screw. Size: OD20mm x 25mm L; Material: aluminum Package: 4pcs

TWO TREES Bambu Lab X1/P1P Upgrade Pack (Hotend Kit + 0.4mm Brass Nozzle + 0.6mm Brass Nozzle)

Sponsored by eBay

Bring efficiency and sustainability to your printing setup with the Brother WT220CL Waste Toner Box, an essential component for your Brother laser printers. This durable and high-quality waste toner box is the perfect companion for models HL-3140CW, HL-3170CDW, MFC-9130CW, MFC-9330CDW, and MFC-9340CDW, ensuring a seamless fit and reliable performance.Crafted to meet the exact specifications of your printer, the WT220CL Waste Toner Box is designed to collect excess toner during the printing process, thereby maintaining the cleanliness and longevity of your printer. Its convenient design allows for easy installation and replacement, minimizing printer downtime and maintaining productivity in

NOTE: Use removable A4988 or DRV8825 compatible stepping driver CAN BE USED FOR: The extension board can be used for engraving machine or 3D printer driver COMPATIBLE WITH GRBL 0.8: Compatible with GRBL 0.8. Open-source firmware operated, converting G code command into stepping signal PWM SPINDLE AND DIRECTION PIN: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4) COMPACT DESIGN: Compact design, s

[Support In-Screen Fingerprint ID] Ultra slim film does not interfere with the touch response and In-Screen Fingerprint ID. Self-healing technology: soft, flexible, tough, military-grade thermoplastic urethane, designed to absorb impact. The Screen Protector is resistant against scratches, punctures, UV light and will not yellow.

3D Touch BLTouch Sensor Auto Bed Leveling Sensor Bl Touch For 3D Printer Parts Anet A8 Tevo Reprap MK8 Ender 3 Pro(probe 5pcs)

Sponsored by eBay