Audio-Technica ATW-3211DE2 Wireless System, DE2: 470.125 to 529.975MHz

ATW-R3210 3000-Series Receiver The ATW-R3210 receiver features automatic frequency scanning that eliminates the need for searching for clear channels by automatically selecting the most appropriate frequency for the area in which the wireless is operating. 25 kHz frequency spacing enables the system to easily find an open frequency in crowded RF environments, while pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system. Once selected, frequencies can be synced with transmitters using the system's IR sync functionality. • Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in four frequency bands: DE2 (470-530 MHz), EE1 (530-590 MHz), EF1 (590-650 MHz) and FG1 (650-700 MHz)• True Diversity operation reduces dropouts• Frequency scan and IR sync functionality for ease of setup• Dual-mode receiver display can switch between standard view or a performance view that highlights key metering• Receiver include OLED screens for optimal readout of key settings and alerts• Antenna power available for powered antennas and other in-line RF devices• Ground-lift switch helps eliminate audible hum caused by ground loops• Balanced and unbalanced audio output jacksThe system's squelch setting can be configured to automatically adjust to maximize range while minimizing potential interference. Advanced digital Tone Lock squelch provides enhanced rejection of interference. In addition, the Tone Lock signal from the transmitter also conveys information on the transmitter's battery condition and mute status back to the receiver for display. The receiver's dual-mode front panel display can switch between the standard view, which provides continuous indication of RF signal strength, frequency, mute status, audio modulation level of the received signal and transmitter information and a performance view, which highlights key metering. Settings can be easily adjusted using the control dial and BACK button located on the receiver's front panel. Settings can also be locked to prevent them from being changed. Operating on 12V DC, the receiver incorporates rear-panel connections for balanced XLR and unbalanced 1/4" outputs, along with detachable BNC 1/4" wave antennas. Switchable 12V DC antenna power is available on the BNC-type connectors for powered antenna accessories. The receiver is half-width for a standard 1U 19" rack-mount and includes rack-mount adapters. ATW-T3201 3000-Series Body-pack Transmitter All transmitters operate using two AA batteries and feature high- and low-level RF output settings. The low-level setting extends battery life while retaining a strong RF signal link. Charging terminals on the base of each transmitter work with the optional ATW-CHG3 and ATW-CHG3N charging docks to recharge AA NiMH batteries. Each transmitter's OLED screen presents a great deal of setup and operating