Audio-Technica AT4051B

The Audio-Technical AT4900b-48 is a professional-quality shotgun microphone body ideal for field or studio use. The mic is compatible with interchangeable head capsules, allowing you to choose between an omnidirectional, cardioid, or hyper cardioid pickup pattern, depending on your needs. The mic has a rugged turned-brass housing for exceptional du... morerability. Internal transformer less circuitry greatly reduces distortion and provides excellent correlation of high-speed transients. The direct-coupled balanced output provides a clean signal, even under high-output conditions. Additional features of the mic include a switchable high-pass filter to reduce low frequency noise and a -10dB pad for picking up loud sound sources. Features: Professional Quality: The mic is specially engineered to meet professional standards Rugged Build: The turned brass housing provides long-lasting durability High-Quality Audio: The transformer less circuitry greatly reduces low-frequency distortion and provides excellent correlation of high-speed transients, while the direct-coupled balanced output provides a clean signal, even under high-output conditions Interchangeable Capsules: Interchangeable head capsules allow you to select the pickup pattern that best suits your needs 1 Filter and Pad: A switchable 80Hz high-pass filter and -10dB pad allow you to reduce low-frequency noises and extend the mic's headroom in order to capture loud sound sources Phantom Power: The mic runs on 48V phantom power, which it receives via the standard XLR connector Specifications: Transducer: Externally Polarized (DC Bias) Capacitor Polar Pattern: Variable, Dependent on Capsule Frequency Response: 20Hz - 20kHz Dynamic Range (Typical): 129dB Signal-to-Noise Ratio: 78dB Maximum Input Sound Level: 145dB, 155dB With Pad Power Requirements: 48V Phantom Impedance: 50 Ohms Output Connectors: 3-Pin XLR Pad: Yes, -10dB, Switchable Low Frequency Roll-Off: 80Hz High-Pass Filter, Switchable Dimensions (Diameter): 6. 10x0. 83" (155. 00x21. 00mm) Weight: 4. 60oz (130g)

The AT4051b cardioid condenser microphone is a versatile studio performer you can employ with confidence in a wide range of professional miking applications. Ideal for professional recording as well as critical audio capture applications in broadcast, it includes direct-coupled balanced outputs, providing clean signals in high-output situations, an... mored is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast transient response contributes to its open, transparent reproduction of even the most difficult-to-capture instruments. It's fully RoHS-compliant – free from all substances that are specified in the EU directive on the reduction of hazardous substances (RoHS).FeaturesSpecially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcementHigh front-to-back rejection ratio - cardioid polar pattern improves isolation of desired sound sourceDirect-coupled, balanced output results in a clean signal even under high-output conditionsTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsSwitchable 80Hz hi-pass filter and 10dB padRugged turned-brass microphone housing for enduring dependabilityState-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standardsRoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)SpecificationsElement: Externally-polarized (DC bias) capacitorPolar Pattern: CardioidFrequency Response: 20 - 20,000HzLow Frequency Roll-Off: 80Hz, 12dB/octaveOpen Circuit Sensitivity: -34dB (19.9mV) re 1V @ 1PaImpedance: 50ΩMaximum Input Sound Level:145dB SPL, 1kHz @ 1% T.H.D.155dB SPL, with 10dB pad (nominal)Noise: 16dB SPLDynamic Range (typical): 129dB, 1kHz @ Max SPLSignal-to-Noise Ratio: 78dB, 1kHz @ 1PaPhantom Power Requirements: 48VDC, 4.8mA typicalSwitch: Flat, roll-off, 10dB pad (nominal)Weight: 4.4oz. (126g)Dimensions (L x max. body diameter): 6.10" x 0.83" (155 x 21mm)Output Connector: Integral 3-pin XLRM-typeOptional Interchangeable Elements (sold separately):AT4049b-EL (omnidirectional)AT4053b-EL (hypercardioid) Audio-Technica AT4051b Small-Diaphragm Cardioid Condenser Microphone.