Comparison Orient AA02008D vs Casio MQ-24-7B

— Quartz. A mechanism based on an electronic quartz oscillator. Such a generator produces a strictly defined number of pulses per second, and on the basis of this data, the clock keeps time. In common parlance, only clocks with hands are called “quartz”, but the same principle applies to “electronic” models (with a digital display). Anyway, the main advantage of quartz movements is high accuracy — even in inexpensive models it is about ± 15 sec / month, and in the most advanced it can reach ± 0.3 sec / month. And these watches are much cheaper than mechanical ones. The main disadvantage of "quartz" is the need for power supply; and although a miniature battery usually lasts for several months, it still has to be changed periodically. In part, this moment is compensated by the use of solar panels and automatic winding systems (see "Source of movement").

— Mechanical. A traditional type of watch movement that uses a compressed spring as the power source. One of the advantages of such watches over quartz ones is that they do not require a battery — it is enough to wind the spring regularly, which can easily be made into a habit; and in the presence of automatic winding (see the relevant paragraph), the matter is even more simplified. "Mechanics" is noticeably more expensive than "quartz", although this may be a virtue that emphasizes the level of the watch and the status of its owner. But the unequivoc...al disadvantage of this option is the relatively low accuracy: if in quartz watches the error is measured in seconds per month, then in mechanical watches it is already about seconds per day. So, it is worth paying attention to this option either to fundamental connoisseurs of the classics, or to those who, by the nature of their activity, it is important to have a watch that does not depend on batteries (travelers, sailors, military, etc.).

A device primarily used in mechanical watches that provides continuous winding of the watch by moving the wearer's hand. Most often, it is made in the form of a rather massive plate in the form of a sector, which is fixed with a narrow end on an axis in the centre of the mechanism. When the hand and the watch attached to it oscillate — for example, while walking — the plate rotates, providing a spring winding.

One of the advantages of self-winding watches is obvious: they do not need to be wound as often as classic mechanical ones, and if worn constantly, they can do without manual winding at all. The course of such watches is more uniform, since the spring is constantly in an almost compressed state — this has a positive effect on accuracy. Also , automatic winding in mechanical watches is useful for waterproof models, in which the crown is attached to the thread during non-working hours, sealing the case — since the thread does not have to be used often, it wears out less, which has a positive effect on reliability. On the other hand, the self-winding plate increases the weight and thickness of the case, as well as the cost of the watch. In addition, the use of this function in miniature female models is associated with a number of difficulties, and if the owner leads a sedentary lifestyle (for example, due to old age), all the advantages of self-winding come to naught.

Note that there a...re also self-winding quartz watches — these are models with Kinetic technology. For more information about them, see "The source of the move."

The number of stones provided in the design of the watch.

This parameter is relevant for models that have arrows and corresponding moving parts in the "stuffing" (wheels, gears, etc.). The stones in this case are, in fact, a specific kind of bearings used to fasten rotating parts. "Stones" are made from synthetic minerals (for example, artificial sapphires). They provide slightly less friction than traditional metal bearings, and most importantly, they are more reliable and less prone to wear, which accordingly affects the durability of the entire mechanism. However, it is worth noting here that these advantages are relevant mainly for mechanical watches (see “Mechanism type”), quartz models in this sense are not so demanding on bearings.

It is believed that the more stones, the better, but here it is worth considering the functionality of the device. So, for a watch with a central second hand, 16 jewels are considered sufficient, with a side one - 17, but if there are additional functions (calendar, days of the week, etc.), this number can increase accordingly. In addition, the presence of 40 or more stones is often not so much a real necessity as a publicity stunt.

A caliber can be described as the type of movement used in a watch. It is expensive and impractical to design a unique movement for each watch model, so most manufacturers often use the same movement in different watch models, sometimes with significantly different designs. The term "caliber" is due to the fact that initially the type of movement was designated by a number (in inch lines) corresponding to its largest size; however, today unique names or alphanumeric indices that are not directly related to sizes are widely used.

Knowing the name of the caliber on which the watch you are interested in is built, you can, if desired, find more detailed information about the mechanism and determine how its characteristics meet your requirements.

The accuracy of the rate is usually determined by the largest error — the deviation from the reference time, which can occur in a month when the watch is constantly running in normal mode. Accordingly, the smaller the number in this paragraph, the more accurate the clock. In addition, the accuracy of the movement is a kind of status indicator: if the error exceeds the values stated in the characteristics, this may indicate a malfunction in the mechanism.

If the accuracy indicators are the same both in advance and in lag, one number is indicated in the characteristics — for example, 30 sec / month (i.e. +/-30 sec / month); however, many mechanisms have unequal deviations, for example -15/+25 sec/month. Also note that this parameter is relevant only for quartz watches (see “Movement type”): in mechanical models, the accuracy of the rate is noticeably lower, it is measured in seconds not per month, but per day.

The power source of a quartz watch (see "Movement type") — in other words, the type of power source used in it.

— Battery. A miniature battery, usually in the form of a characteristic "pill"; used exclusively in quartz watches (see "Movement type"). The main disadvantage of this option can be called the need for replacement when the charge is exhausted; at the same time, almost all replaceable elements of miniature standard sizes used in wristwatches are produced only in the format of disposable batteries, without the possibility of recharging. On the other hand, they provide a long time of work, are inexpensive and are sold almost everywhere.

— Solar battery. Power supply system consisting of a photocell and a built-in battery. The photocell generates electricity when exposed to bright light, and the battery stores this energy and feeds the watch mechanism. The convenience of such models lies in the fact that with the regular presence of solar (or at least bright artificial) light, the owner does not have to worry about the energy reserve. On the other hand, the photocell significantly affects the price, and if you constantly stay indoors or wear clothes with sleeves that cover your watch, it becomes practically useless. Therefore, this option has not received wide popularity, and it is worth paying attention to such models primarily because they are regularly and a lot outdoors and/or in...bright daylight.

— Autoquartz movement (“kinetic”). A kind of automatic winding (see above), used in quartz watches. This technology was originally released by Seiko under the name "Kinetic", but nowadays it can be found in other manufacturers. Anyway, such systems work similarly to mechanical self-winding — transforming the energy from the movement of the user's hand into the energy necessary for the operation of the mechanism. However, in this case, such a mechanism does not start the spring, but rotates a miniature generator that generates electricity. The resulting charge is stored in a special capacitor and used to operate the quartz movement. Models with such mechanisms are positioned as "quartz watches in which you do not need to change the battery", and in general it is so. At the same time, they have the same limitations as conventional self-winding devices — in particular, with a sedentary lifestyle, this technology is practically useless. Yes, these watches are quite expensive.

The type of markup used on the main watch face. This parameter is relevant for models with hands (see "Dial Type"), while the type of marking is indicated only on the main scale — additional marks on the bezel are not taken into account (although markings on the additional world time dial may be taken into account).

This parameter does not affect the functionality of the watch, and the choice depends solely on the tastes of the owner. The main types of markings found in modern watches include Arabic and Roman numerals (which can be supplemented with marks), a combination of these numbers, as well as the simplest marks themselves. Here are the main features of these options and their combinations:

— Arabic. Dials that have marks only in the form of Arabic numerals — that is, standard modern numbers "1", "2", etc. In this way, both all divisions of the dial, and only some of them (for example, 3, 6, 9 and 12 o'clock). However, anyway, there are no other types of marks in such watches.

— Roman. Dials that are marked only in the form of Roman numerals — combinations of the symbols I, V, X. This marking gives the watch a peculiar style, but it can take some getting used to — and therefore is less common than Arabic numerals. Again, in this case we are talking about dials that do not carry any other designations, excep...t for numbers of this type.

— Tags. Minimalistic design, in which the divisions on the dial are indicated only by a label, without a signature. Most often, marks are applied to all twelve hours; exceptions to this rule are possible, but they are rare nowadays. It should be noted that such a design can be found both in classic watches with minimal functionality and in advanced models with extensive features: in the first case, the marks give the product a neat appearance, in the second, they save space on the dial for additional scales and markings. Theoretically, such markup is not as convenient as notation with numbers; however, almost all dials in modern wristwatches use a 12-hour scale with a standard location of marks, so with a little habit you can completely do without numbers — the position of the mark on the scale already carries enough information.

— Arabic + Roman. Dials that combine both types of numbers described above at once (sometimes also with marks; in this case, the presence of marks is not specified). The most popular type of watch with this feature is the world clock (see "Features and Features"), where one dial is marked with Arabic numerals and the other with Roman numerals. There is also a combination of these symbols on the same scale — for example, when 3 and 9 hours are indicated by ordinary numerals, and 6 and 12 by Roman numerals. However, neither one nor the other variant received special distribution.

— Labels + Arabic. Dials, in which part of the markings are applied with Arabic numerals, part with marks (for both, see above). Moreover, the ratio of both can be different: for example, in some models there is only one digit (usually "12"); in others, key positions "3", "6", "9" and "12" are designated by numbers; thirdly, part of the dial is occupied by a display, near which the numbers simply do not fit and you have to manage with marks, etc.

— Marks + Roman. The dials, in which part of the markings are applied with marks, part with Roman numerals. This markup method is generally similar to the “labels + Arabic” option described above (and can also provide different design options).

Clock face background colour. Indicated for models with pointer or combination dials (see "Dial type"); in purely electronic models, usually, either a grey substrate (for conventional LCDs) or a dark base (for LEDs) is used.

The most popular in modern watches are black, white, silver and blue dials. However, in addition to this, other shades can be found on the market — in particular, beige, yellow, green, golden, brown, red, orange, pink, grey and purple. A special case are watches with chameleon glasses (see below).

Some models are available in several colour options, in such cases these options are listed separated by commas — for example, "white, red, silver." If the dial is painted simultaneously in 2 or 3 colours, they are indicated as a combination — for example, "white with red" or "white with yellow and red". And multi-coloured models include models in which more than 3 colours are used for the dial.

How to illuminate the clock face.

— Luminescent coating. A variant used in pointer dials: the hands, and sometimes the scale, are coated with a “phosphorus” coating that glows in the dark. This method of backlighting is inexpensive and can be used even in low-cost models; in addition, it does not require batteries and is suitable even for mechanical watches. On the other hand, coverage is often not as effective as it should be. The fact is that for work it must be “charged” from the sun or another bright light source, and this “charge” is enough for an average of 5-6 hours, and already in the first couple of hours the brightness of the glow drops noticeably.

— Electronic. Illumination based on LEDs or other miniature light sources. Usually, it does not work constantly, but turns on and off by pressing a special button; the exception is LED dials (see "Dial Type"). The main advantage of electronic backlighting is efficiency: it is guaranteed to be enough to view the image on the dial. In addition, such systems do not depend on external illumination, in contrast to the luminescent coatings described above. On the other hand, the lighting requires a battery to operate; therefore, this type of illumination is found exclusively in quartz watches (see “Mechanism type”).

— Luminescent coating / electronic. Systems that combine both types of illumination described above. This option is f...ound mainly among models with combined dials: the hands are coated with a luminous coating, and the electronic backlight is intended mainly for displays and additional scales (and also as a backup option for the hands). The combined backlight is very convenient, however, such watches are somewhat more expensive.

— Tritium illumination. Illumination option found on premium pointer dials. Miniature flasks filled with tritium, a radioactive form of hydrogen, are responsible for the illumination in such models; from the inside, the surface of such flasks is covered with a phosphor, which glows under the influence of tritium radiation. Separately, we note that this radiation does not pose a danger to humans: it does not go beyond the bulb, and even inside its intensity is extremely low. Tritium illumination is expensive, but it is extremely convenient from a practical point of view: "flashlights" work constantly, without batteries and regardless of external lighting, and shine significantly brighter than a conventional luminescent coating. However due to the decay of tritium, they gradually lose their brightness, but this happens very slowly: it takes 12 years to reduce by half, and at least 20 years for the backlight to become useless.