Comparison Atlant XM-6024-100 white vs Snaige RF31NG-Z10021 white

The total capacity of the refrigerator is the total capacity of all the main working chambers: refrigerating, freezing, zero, and wine chambers. The set of these chambers, of course, will be different in different models (see more about them above). Here we note that large volumes, on the one hand, simplify the storage of numerous products and, on the other hand, affect the dimensions and price of the unit. It is also worth considering that refrigerators of the same total capacity may differ in the capacity of individual chambers.

The refrigeration circuit can be described as a heat sink system that has a separate connection to the compressor (see “Number of compressors”) and a separate, independent from other similar systems, regulation of the operating mode.

In the most common variety of modern refrigerators — two-chamber models with a freezer — both one common circuit for both chambers and 2 circuits can be provided. The second option is more expensive, but it gives an important advantage — in such refrigerators, you can completely independently control the operating modes of the refrigeration and freezer compartments. If there is only one circuit, these adjustments turn out to be interconnected: for example, when you turn on the fast freeze mode (see "Features"), the main chamber also starts to work at increased cooling power, which is not always desirable.

As for refrigerators with three or more chambers, usually, the number of circuits in them is less than the number of chambers — otherwise, the design would be unnecessarily complex, cumbersome and expensive.

The compressor is a kind of "heart" of the refrigerator — a pump that circulates freon through the cooling circuits and transfers heat from the contents to the outside.

Most modern refrigerators have one compressor that serves all the chambers at once (if there are several). This design turns out to be as simple as possible, inexpensive and, at the same time, quite functional. For example, it does not interfere with regulating the conditions in different chambers separately (for this, separate cooling circuits serviced by a common compressor are provided). On the other hand, such a refrigerator can only be defrosted as a whole (there is no possibility of completely turning off individual chambers). And when the compressor fails, the entire unit becomes useless.

In turn, more advanced models with 2 compressors(or even more) are devoid of these shortcomings. These compressors (and the chambers connected to them) can be turned off individually, defrosting the refrigerator chambers separately without having to completely unload the contents. And if one pump breaks down, the second one remains operational, and at least some of the chambers also retain their functionality. On the other hand, such a design greatly increases the cost, and its advantages are not so often decisive. Therefore, there are few two-compressor refrigerators nowadays, mostly premium models. And a larger number of pumps is found only in some top models fo...r four chambers or more.

The No Frost function prevents the formation of frost inside the refrigerator. The general principle of its operation is that excess moisture is blown out of the working chamber by a special fan, not having time to settle on the walls and form frost.

This function is most relevant for the freezer, although it is technically easy to provide in the refrigerator. Therefore, refrigerators with No Frost in all compartments are the most popular nowadays, much less often this system is installed only in the freezer, and extremely rarely — only in the refrigerator (usually in such models there is no freezer at all).

The No Frost function significantly simplifies the user's life. It eliminates the need to manually defrost the refrigerator and even eliminates the need for automatic defrosting systems (see "Features"). The reverse side of this convenience is that such systems absorb moisture not only from the air but from the food inside too. So for long-term storage, the contents must be tightly packed — otherwise, it dries quickly. In addition, the presence of No Frost inevitably increases the overall cost of the fridge. So if these moments are critical for you, the fridges without No Frost may well be the best choice.

The total capacity of the main working chamber of the refrigerator. If there are separate zero chambers, compartments for wine and other additional functions, this paragraph takes into account only the volume of the refrigerating chamber itself, without additional equipment. In the smallest modern units, this figure does not even reach 100 liters, in the largest it can exceed 400 liters.

The choice of capacity depends on the actual storage needs of the products. At the same time, both the volume of stocks and the frequency of their replenishment (every day, once a week, etc.) matter. The chamber should not be stocked completely; this adversely affects the quality of the refrigerator. On the other hand, it is worth remembering that large volumes accordingly affect the dimensions and price of the unit.

In general, for one or two people, a capacity of 200 – 250 liters, or even less, is considered quite sufficient. The optimal capacity for a family of three is about 250 – 300 liters, for four to five people — 300 – 350 liters, and larger volumes are really needed mainly for specific situations when food has to be stored in large quantities and for a long time.

The number of shelves supplied with the refrigerator. In this case, only shelves placed inside the main (refrigeration) chamber are taken into account. And closed drawers, which are usually at the bottom, are not considered shelves.

In general, this amount depends on the volume: the more spacious the refrigeration compartment, the more shelves are usually provided in the kit. At the same time, there is no strict dependence here, and refrigerators of similar capacity can be equipped with a different number of shelves. As for specific options, the most modest models come with 1 – 2 shelves, 3 shelves and 4 shelves can be called an average, and more are found in some units.

In most modern refrigerators the shelves are removable. In addition, they can be installed at different levels. In this case, it is not necessary to use the entire set: for example, if it is planned to place tall objects inside, one of the shelves can be removed, creating a vast space. And vice versa: if necessary, you can, usually, buy additional shelves. So the number of shelves in the kit only allows you to evaluate the overall possibilities for organizing space in the refrigerator. How to use these features depends on the user.

This function means that there is a built-in fan that circulates air around the refrigerator compartment. It contributes to the evenest distribution of cold and more efficient cooling than in units without a fan, where the air moves only due to natural convection. The main disadvantages of dynamic air cooling are the increase in noise level, energy consumption and the cost of the refrigerator.

Indoor lighting based on built-in light-emitting diodes (LED) has several advantages over more traditional bulbs. Firstly, due to its high efficiency, it gives excellent brightness with low power consumption and also generates almost no heat. Secondly, small LED lamps can be evenly distributed along the walls of the chamber, providing bright illumination of the entire volume of the refrigerator. The disadvantages of such lighting can only be attributed to a certain difficulty in repair and replacement. However, modern LEDs are quite durable.

The capacity of the freezer installed in the refrigerator. Such a chamber is designed to store products at temperatures well below zero (on average -18 °C). Its capacity is related to the total capacity of the refrigerator (and the capacity of the main, refrigerating chamber). However, there is no strict dependence here — models with a similar volume of the refrigerating chamber can be equipped with freezers of different sizes.

When choosing by capacity, it is worth considering how much frozen food you plan to store at a time. Note that it is undesirable to fill the freezer completely — this negatively affects the efficiency of work. However, if this chamber is planned to be used only occasionally, and you do not plan to keep numerous products in it, you can not chase after the capacity: for such cases, 25 – 50 liters, or even smaller capacities, are enough. In the smallest modern refrigerators, the freezer capacity does not exceed 10 liters. And vice versa, very roomy freezers come across — for 176 – 200 liters and even more. Such volumes are typical mainly for side-by-side and French door units (see "Product type"). However, they are also found in models of the classic two-chamber layout.