Comparison Smart Watch Smart Q100s vs Smart Watch Smart Q100

— TFT. The simplest type of liquid crystal panel used in colour displays. They provide a relatively low, but generally sufficient image quality, while they are much cheaper than more advanced options. This type does not require backlight — more precisely, the backlight is part of the screen itself and turns on with it. Of the unequivocal disadvantages, it is worth noting that many TFT panels have rather limited viewing angles; however, as technology improves, this drawback is gradually eliminated.

— IPS. A variety of LCD panels created in an attempt to eliminate the shortcomings of TFT. There are many subspecies of IPS panels, but they all feature high colour reproduction quality, excellent brightness and wide viewing angles. The disadvantage of this option is the relatively high cost.

— OLED. In this case, we mean the technology used to create the simplest monochrome displays. In such screens, each segment that makes up the image is a separate LED, which eliminates the need for external illumination (and even the display itself can be used as a flashlight).

— AMOLED. Screens based on a panel of active organic light emitting diodes. Similar to various types of TFT, this technology allows the creation of high-resolution colour displays. Its key feature is that the screen doe...s not require a separate backlight system — in AMOLED panels, each pixel glows independently, resulting in somewhat lower power consumption. At the same time, such screens are distinguished by good colour reproduction quality, excellent brightness and wide viewing angles, however, they are much more expensive than TFT.

— Super AMOLED. An enhanced version of the AMOLED technology described above, delivering more expansive colour reproduction and brightness, as well as improved touch accuracy and speed, all at a thinner display and lower power consumption. In addition, the degree of reflection of external light is reduced, such a panel gives less glare and is better visible in sunlight.

— E-Ink (E-Paper). Displays made using "electronic paper" technology; in addition, this category also includes screens such as Memory LCD. The classic E-Ink screen is black and white, does not have a backlight (however, it can be built into particular gadgets), has a very low refresh rate and is poorly suited even for stopwatches, not to mention videos or animated pictures. On the other hand, "electronic paper" is perfectly visible in bright light and has a very low power consumption: it requires electricity only when the image is changed, while a still image remains visible even when the power is completely turned off. Memory LCD screens, in turn, with the same advantages, are almost as good as classic LCD panels in terms of refresh rate, but for a number of reasons they are not widely used.

— Transflective. A specific type of LCD panels that can work both due to its own backlight and due to reflected light. In bright external light (for example, in the sun), such a screen effectively reflects it and does not require a separate backlight — however, it is still included in the design and turns on in low light. This type of operation can significantly reduce power consumption compared to traditional LCD screens, where the image is not visible without backlight; in addition, good visibility in bright light is also an important advantage. The main disadvantage of panels of this type is their high cost; in addition, they are made mostly monochrome.

- LTPO. OLED and AMOLED matrices with an adaptive refresh rate that varies over a wide range based on the tasks performed. When rendering dynamic frames, screens with LTPO technology automatically raise the refresh rate to the maximum values, while viewing static images, they automatically reduce it to the minimum. At the heart of the technology is a traditional LTPS substrate with a thin TFT oxide film on top of the TFT base. Dynamic control of the refresh rate is provided by controlling the electron flow. The key benefit of LTPO screens is their reduced power consumption.

The method of charging the battery provided in the gadget.

— MicroUSB. Charging via standard microUSB port. The main advantage of this option is the ability to charge from any microUSB cable or charger with such a connector, not necessarily branded. On the other hand, the connector itself is quite large by the standards of wrist devices and can significantly affect the increase in the dimensions of the gadget.

— USB type C. A compact version of the USB interface with a reversible design that allows the plug to be inserted in either direction. The USB type C specification provides for a number of advanced power options - in particular, various fast charging technologies have been developed for this connector.

- Branded connector. Charging via a cable that connects to the watch using the original proprietary interface. The other end of the cable, as a rule, has a standard interface - most often USB, which allows you to use any computer port or network adapter with such a connector for charging. Branded connectors can be smaller than microUSB, and fit better into the layout of the clock. However, for charging, as a rule, you have to use only original accessories, including branded cradles-stands, which are intended mainly for permanent stay in one place.

- Wireless. The main advantage of wireless c...harging technology is the absence of any connectors - which is important, given the miniature size of wrist gadgets. At the same time, this method takes more time and significantly affects the cost of the device. Note that wireless charging is not contactless: the corresponding chargers can take the form of a stand or platform on which you need to put the watch, or a magnet attached to the back cover of the gadget, etc.

- Magnetic. Charging via a cable with convex metal contacts that are magnetized to the connector on the back cover of the wearable gadget. The magnetic contact group has no gaps, which improves the dust and moisture protection qualities of the smartwatch, and the charging plug itself is attracted to the magnetic connector, eliminating the need to look for the correct position for connecting the cable.

- USB A connector. The presence of a built-in connector allows you to connect the gadget directly to the charger, laptop, power bank without using additional cables.

The capacity of the battery that is installed in the gadget.

Theoretically, the higher the capacity, the longer the battery can work on a single charge. However, in fact, the battery life of the gadget also depends on its power consumption, and it is determined by the specs of the display and the hardware. Therefore, only models of the same type with very similar specs can be compared in terms of battery capacity; and for an accurate assessment of battery life, it is better to focus on the directly claimed operating time in one mode or another (see below).

It is also worth mentioning that high-capacity batteries inevitably turn out to be quite heavy and bulky. So the capacity of batteries installed in wearable gadgets is also greatly limited by size and weight.

The level of dust and water protection according to the IP standard, which the gadget corresponds to.

This parameter is usually denoted by the letters IP followed by two characters ( IP55, IP56, IP57, IP65, IP66, IP67, IP68, IP69) — for example, IP68. The numbers indicate the specific degree of protection: the first — dust resistance, the second — water resistance. Instead of one of the numbers, there may be the letter X ( IPX5, IPX7, IPX8) — this means there is no certification for this indicator: for example, an IPX7 device has a moisture resistance of 7, but has not been tested for dust protection. However, a high degree of protection against water automatically means good dust resistance.

Here are the levels of dust protection (first digit) found in modern wearable gadgets:

5 — dust resistance. Some dust may get inside, but it does not affect the operation of the device. There is no point in specifying lower levels, as they do not provide protection against dust.
6 — full dustproof (dust ingress is completely excluded).

The second digit describes the r...esistance to moisture, here the options can be as follows:

4 — resistance to water splashes from any direction. It is considered the minimum level of water protection, which makes sense to indicate in the specs: in particular, it allows you to endure exposure to rain without consequences.
5 — resistance to water jets from any direction. This level allows you to endure heavy rain and makes it possible to at least calmly wash your hands without removing the gadget.
6 — protection against strong water jets and impacts of sea waves. It is undesirable to completely submerge such a gadget under water, but it can be used even in a strong storm and not removed during the shower.
7 — the possibility of short-term immersion under water to a shallow depth (up to 1 m), without constant operation in immersed mode. With such a device, usually, you can even swim — but for a very short time (several minutes) and without diving. However, it is worth noting that not every gadget with this level of protection normally tolerates water jets (that is, compliance with level 7 does not necessarily mean compliance with lower levels 5 and 6).
8 — the possibility of a long (more than 30 minutes) stay under water at a great depth (more than 1 m), using in submerged mode. The specific limit of depth and time may be different, it should be specified separately; there are both gadgets with basic capabilities that allow you to dive a couple of metres, and diving models with an allowable depth of several tens of metres. Similar to level 7, water jet resistance is not guaranteed in this case.
9 - the possibility of almost unlimited time spent under water when diving to a certain depth, using the device in submerged mode. Level 9 also guarantees resistance to hot water under strong pressure - wrist gadgets with this level of dust and moisture protection can withstand high-temperature water jets under pressure.

In most cases, the weight of the watch body itself is indicated as the weight of the model, since the strap is removable and can be replaced with another one. However, there are also models when the weight is presented with an included strap. Anyway, if the manufacturer indicates a specific method of measuring weight (with or without a strap), we add this information.